Ulubione

Najedź, aby powiększyć

Meterk DK-8-KZ 1000 mW High Speed ​​Mini USB grawer laserowy Carver Automatic DIY Print Grawerowanie Carving Machine Off-line Operacja z okularami ochronnymi - 3 miesiące gwarancji

Meterk DK-8-KZ 1000 mW High Speed ​​Mini USB grawer laserowy Carver Automatic DIY Print Grawerowanie Carving Machine Off-line Operacja z okularami ochronnymi - 3 miesiące gwarancji

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
  • US Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china

wtyczka:

  • fr
Proszę wybrać wtyczka
QTY:

Każdy użytkownik może kupić tylko 5 Kawałek

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Ochrona kupującego

  • Pełen zwrot kosztówJeśli nie otrzymasz zamówienia
  • Pełny lub częściowy zwrot pieniędzy , Jeśli przedmiot nie jest zgodny z opisem Ucz się więcej >
Ta maszyna do grawerowania laserowego jest wyposażona w funkcję drukowania rzeźb i bardziej praktyczną niż zwykłą maszynę do grawerowania. Ta mini maszyna do grawerowania laserowego o wysokiej precyzji i wysokiej stabilności doskonale nadaje się do grawerowania DIY. Obsługuje tryb offline, wygodny niż zwykła maszyna grawerująca.

Cechy:
Ta maszyna do grawerowania laserowego jest wyposażona w funkcję drukowania rzeźb i bardziej praktyczną niż zwykłą maszynę do grawerowania.
Wysoka precyzja i wysoka stabilność: dzięki 108 śrubom i konstrukcji ze stopu są mocne.
Unikalna rama i słabe światło automatyczne pozycjonowanie: położenie ramki ułatwia pozycjonowanie obrazu.
Praca w trybie offline: to urządzenie obsługuje obsługę bez komputera, konieczne jest jedynie przygotowanie obrazu i połączenie dwóch portów USB z ładowarką lub zasilaniem (niedołączone); jeden przycisk do działania.
Profesjonalna moc IC i chłodnica, czas rzeźbienia będzie trwać znacznie dłużej, a wydajność rzeźbienia będzie bardziej stabilna niż w innych laserach.
Regulowana niebieska głowica lasera, duża prędkość i obsługa wielu rodzajów materiałów.
Przedmioty mogą być rzeźbione, w tym: mahoń, bambus, kartki papieru, kości słoniowej, skóry, łatwopalne tworzywo sztuczne, PCBA itp.
Przyjdź z parą okularów ochronnych, aby chronić oczy przed zranieniem laserem.
Szerokie zastosowanie: może być stosowany do druku, narzędzi ręcznych i obróbki przemysłowej.
Drukowanie w wysokiej rozdzielczości: 512 * 512.

A co z życiem głowy lasera?
Zwykle od około 3 miesięcy do 1 roku, ale jest również ściśle związany z tym, jak z niego korzystasz. Główne czynniki to: temperatura, czas, natężenie prądu, napięcie, antystatyczna obróbka itp.

Jak ocenić spaloną głowę lasera?
1. Gdy maszyna pracuje, światło było znacznie osłabione.
2. Gdy maszyna działa, światło jest rozproszone i osłabione oraz nie może ustawić ostrości.
3. Nie można wypalić przedmiotu, gdy czas palenia, materiał rzeźbiący i długość ogniskowej są prawidłowe.

3 miesiące gwarancji na głowicę laserową:
Jeśli problem wypalenia głowicy laserowej pojawi się w okresie gwarancyjnym, zaoferujemy zamienną głowicę laserową za darmo.

UWAGA:
1. Nie można grawerować metalu, akrylu ani żadnych innych materiałów opóźniających.
2. Czytnik kart zostanie wysłany w losowej kolorystyce, proszę uprzejmie!
3. Aby zapobiec wypaleniu się lasera spowodowanemu przegrzaniem, należy wyłączyć urządzenie na co najmniej 5 minut po 30 minutach ciągłej pracy.


Dane techniczne:
Materiał: akryl + aluminium + stal nierdzewna
Główny kolor: czarny
Moc: 1000 mW
Długość fali laserowej: 405 nm
Format obrazu: jpg
Rozmiar obrazu: 512 * 512 pikseli
Obraz Grawerowanie: grawerowanie bitmapowe
System wsparcia: Win7 / Win8 / XP / Win10
Napięcie zasilania: 4,2-5,5V
Prąd zasilania: 1A
Obszar roboczy: 38 * 38 mm
Rozmiar produktu: 15.2 * 14.2 * 19cm / 5.98 * 5.59 * 7.48in
Waga produktu: 970g / 34,22oz
Rozmiar opakowania: 30 * 20 * 21 cm / 11,81 * 7,87 * 8,27 cala
Waga opakowania: 1512 / 53,35oz

Lista pakietów:
1 * Grawerka
1 * Okulary ochronne
2 * Kable USB
1 * Klucz imbusowy
1 * Płyta instalacyjna
1 * Blok drewna
1 * Torba transportowa
1 * Instrukcja obsługi

pytanie Odpowiedź

  • Q What is the cost of shipping to South Africa and how long will it take to deliver?

    By Max Draco May 14, 2018

    A You can choose the free general postal service, or you can choose to pay for express delivery. Different logistics methods have different transportation costs. Please refer to the official website information for specific prices. We are sincerely sorry that we could not estimate exact delivery date since it also depends on your customs inspection and local post delivery. Sometimes delivery time will delay due to unexpected trouble like weather. What we could do is to process your order quickly and ship it out in first priority.

    Reply By Customer Service Center May 15, 2018
  • Q Maximum time to deliver product to india

    By Gurmeet August 22, 2017

    A 25 day .

    Reply By Customer Service Center August 22, 2017
  • Q How much time does it take to be delivered to India?

    By Rohan Advani May 4, 2017

    A Hi, usually will take around 20 days .

    Reply By Customer Service Center May 4, 2017
  • Q I need one Laser Engraving Machine to Engrave Inside the Wedding Bands

    By Aris Tsiropoulos March 18, 2017

    A It is a good choice.

    Reply By Customer Service Center March 21, 2017

Pytania i odpowiedzi klientów

Sortować:
0
Q

Can this be used to cut templates?

A
  • No, it just "burns" an image into the wood. It doesn't cut at all.

    By Debbie Biddle on May 3, 2018

(1)
0
Q

Does this only engrave or will it also cut through acrylic? I'm looking to make my own acrylic die cut keychains.

A
  • I have tried it on thin plastic and the best that I have gotten is a burnt image.

    By Donnica on April 25, 2018

0
Q

Will this machine actually cut acrylic into shapes or is it just an engraving machine?

A
  • Hello Customer Thanks for your asking . Meteark Machine is an engraving machine not cutting machine. thanks Ilastore Customer Service Team

    By Kaori Chiba on March 29, 2018

0
Q

will this engrave glass candles, and also if i order it and dont end up liking it can i return?

A
  • It won't do metal or glass. It will do plastic (not tougher polymers though), leather, rubber, wood and paper.

    By ND on March 23, 2018

(1)
0
Q

Help i accidentally deleted the usb files before i could get it to download the software. is there anywhere else i can download them?

A
  • Hello customer Thanks for your asking . you can email to us service@ilastore.com ,we can send you the PDF file again. thanks Ilastore Customer Service Team

    By Pobleto on February 13, 2018

0
Q

What material this machine will engrave no glass or metal so what does ingrave on ?

A
  • not happy with it.. only the piece of thin wood it comes with .. I wanted to use it to engrave plastic but it didnt work.

    By Erick S. on February 13, 2018

(1)
0
Q

So this won't engrave on any metal?

A
  • Hello Autumn Silver Thanks for your asking, yes you are right, METERK machine can not engrave on metal.thanks Ilastore Customer Service Team

    By Serin Mizusawa on January 12, 2018

0
Q

does machine will work on metal sample on knife or plate metal?

A
  • Hello Veronica Thanks for your asking, The Meterk Machine can not work on metal or knife or palte. thanks Ilastore Customer Service Team

    By Manami Yamaguchi on January 10, 2018

0
Q

Can you engrave small rocks

A
  • No. Have to be able to burn what your engraving.

    By Deborah G. Rinaldi on December 31, 2017

(1)
0
Q

Would this engrave a pistol grip?

A
  • Yes, but try it on something you don’t care about first. It doesn’t burn very deep. I returned mine. Very slow and only burns about a 1/16 “ deep

    By Jon M. Cantonwine on December 29, 2017

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.6

oparte na 73 Opinie klientów

  • 5 gwiazdy
    60%
  • 4 gwiazdy
    40%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By josh mendoza

    February 7, 2017

    This engraver is pretty awesome after getting it running. After installing some software from a USB drive, I was able to make designs of things based on drawling’s and certain images, albeit it has to be heavily modified to show up good on burnt material essentially. All the images I have printed have seem to be extremely accurate on cardboard where it would go over spots little by little to burn it in. Yes, this does make a little smoke but it’s smoke detector friendly. In addition, it also runs on lower power such as that of a power bank, another aspect I found really surprising as most expensive engravers and lasers have separate high-power things such as bigger batteries or even its own power out plug. This one seems to cut down on that barrier and simply uses my computer’s USB for power. I have so far burned in cardboard, small pieces of wood and thin plastic for my projects. Using the software is really easy with help of the instructions and using the engraver, having to focus for different objects as the only thing to tweak on the actual engraver itself, is also easy. The engraver is small though, about the size of a laptop, so unless if you’re wanting to engrave small objects, keep this in mind. Tldr; it’s a great mini engraver that can simply be plugged into a computer for use and has engraved extremely accurate burns.

    Is this helpful? (0) (2)

  • By Patrick Woessner

    November 17, 2017

    Purchased this as a technology teacher to use with students for line-art engraving and couldn't be happier. Setup was pretty easy thanks to advice in previously posted reviews and I was engraving within 15 minutes using a Windows 10 PC. Once the focal length is adjusted for material thickness (make the dot as small as possible), the quality of the images was VERY good and the engrave time relatively short. If you are looking for a laser cutter and/or professional grade engraving unit, this is not it. If you want to dip a toe into the world of engraving wood, this is well worth the money.

    Is this helpful? (0) (1)

  • By control

    October 5, 2017

    A lot of problems setting it up, but everything was corrected with a high amp power supply. I initially used a Raspberry Pi wall power supply but all the Network would do was stop and start or just buzz. After a couple of days of frustration I found a 3.4A supply and tried it with no luck, however this does not mean all power supplies are rated property. Finding and using a 2.5A unit made all the difference and the little Meterk started working great. It's a has a very small burning area but has been perfect for learning a lot about engraving and it can also cut paper. Well worth the very good price combined with Amazon Prime service.

    Is this helpful? (0) (1)

  • By jerrod balzer

    March 30, 2017

     I've always thought it would be so cool to be able to engrave our names onto leather tags for backpacks, luggage, purses, bracelets, necklaces, and such, or even pieces of wood. There are so many crafting possibilities, but lasers are generally so expensive. Well, I gave this one a shot and I was not disappointed. It arrived with the laser equipment, moveable parts taped down to avoid damage, along with focus glasses and a velvet pouch for them, an allen wrench for replacing the laser tube, a small wooden block to practice on, a USB stick that holds a 1GB micro SD card, and the user manual that has many languages, English among them. On the equipment is a piece of thick paper with a butterfly engraved on it. This was to show the machine was tested at the factory for quality before leaving. I thought that was a nice touch. My first and only hang-up was installing the driver on my Windows 10. The driver on the SD card, via USB, was outdated and would not unpack on Win10. I went to trusfer dot com to download the latest, which they had right at the top of their Downloads page, and it was a bit of a pain to get. On my high speed DSL, it took hours to download this 57mb file, and it failed a few times at that. I'm guessing their site has server issues that limit download speeds or something. I was able to get the driver with some patience, however, and everything worked perfectly once installed. This hiccup with obtaining the updated driver is the reason I removed one star. The rest was easy. It is powered by two USB cords, provided: one for the machine and one for the laser/communicating with the computer. I plugged one into a surge protector that had USB ports, and the other into the computer. I put the sample piece of wood on the machine's platform and held it in place with a rubber band. Next, I put on the focus glasses and turned the very end of the laser until the dot on the wood was its smallest. Next, I opened the laser software (found with the updated driver) and inserted a black and white image. I pressed the red button on the laser and it began outlining the wood block, figuring out the size of the work space. Then I pressed the Start button on the software and it began. It said "30" for burn time but it only took 11:34 minutes. It came out perfectly! I'm thrilled with my new crafting tool and can't wait to try more things. And if the laser tube goes out, more can be ordered at the trusfer dot com site. By the way, my Firefox browser threw up all kinds of warnings when I went to their site. I ignore the warnings and had no problems. My antivirus software also did not like their driver when I started it, but since installation, there have been no issues. I figured I should let you know in case anyone gets spooked by that.

    Is this helpful? (3) (1)

  • By larry j.

    February 28, 2017

    This is a fantastic machine, for the price. It comes with preloaded demo etch, and it's exactly the same as the factory test etch, in place on the plate. Doesn't have a fan, but this is a non issue, the laser head is very efficient and doesn't need extra cooling. Both axis mounts are made from base mounts of old style DVD drives, don't let that bother you, those were heavy duty items, with dual support rods on both. Be aware that there are no limit switches, on either axis. I doubt there would be any issue with this, but you need to be sure that laser is centered on both axis, when you start your etch. On the back, you will find five push buttons, on the card, to move the head. It's partially covered by the back plate, but fairly easy to get to. Don't try moving the head by hand, the stepper motor shaft will mess up the guides on the position guides. As mentioned in the manual, you'll find that Laser won't work right, if you try to power it from a PC port. They recommend 1A 5V supplies for the two USB connections. You upload your sketch to the machine, then it is stored inside the machine. Once that's done, unplug the PC USB and plug into a 1A 5V adapter. The manual will tell you what to do with the big RED button on top. One thing to watch out for, is to stay with your machine, while its working. Not necessarily staring at it, but to be ready, when it is finished. It will repeat the stored etching again, if you don't stop it, by pressing the RED button to abort. The SD that comes with the machine scanned virus free, on mine. It only had drivers and software for PC only. The website that has the software for Android and IOS has a virus warning, when you try to go there. My antivirus had no problem, loading and installing the enclosed SD, but went crazy, when trying to upgrade. That was a small issue compared to the bang for your bucks, with this machine. Overall this a great machine for the money, does a great job for small item etching, and is a fine platform to use for home brew upgrades, for the tinkerer.

    Is this helpful? (2) (1)

  • By matthieu

    February 26, 2017

    Il y a bien les lunettes de protection (indispensable si vous ne voulez pas devenir aveugle) ainsi qu'un logiciel de gravure. Le logiciel ne présente pas beaucoup de fonctionnalité, mais cela suffit pour débuter avec une machine de ce type. On peut voir la zone de gravure, régler la vitesse de gravure (intéressant en fonction des matériaux à graver) Le graveur est facile à prendre en main et cela fonctionne très bien sur papier, carton, bois... Il n'est par contre pas suffisamment puissant pour graver sur du métal (puissance nécessaire de l'ordre de 40W... mais on ne joue plus avec le même type de produit) L'emballage est soigné et le graveur ne risque pas grand chose lors du transport. Je mets que 4 étoiles car je regrette que la lentille de focalisation (réglage manuel) ne soit pas mieux maintenu. Elle ne risque pas de tomber, mais le fait de toucher la vis de réglage bouge légèrement la position du point de focalisation. Dommage si l'on avait déjà préparer le support...

    Is this helpful? (2) (1)

  • By jacinda rilla wright

    February 23, 2017

     This Meterk DK-BL 1500mW Mini DIY Laser Engraving Machine Wireless Bluetooth Print Engraver Bluetooth 4.0 for iOS/Android USB Connection for PC Rapid Speed , is sized at 15.2 * 14.2 * 19cm / 5.98 * 5.59 * 7.48in. In this package, you will receive everything needed to get started and to use this. 1 * Laser Engraving Machine 1 * Protective Glasses 1 * Micro USB Cable 1 * Allen Wrench 1 * Card Reader with 1GB TF Card(software/manual included) 1 * Wood Block 1 * Pouch 1 * User Manual This can be used on and for so many different things. So many different materials. This can be used on such materials as hard wood, plastic, bamboo, rubber, leather, painted metal, cut paper or other flammable materials. Examples are such as phone case, mouse, pencil, name card, wallet, plastic comb, and much more. This has Bluetooth 4.0, wireless data communication, plus advanced APP for engraving control. You can have DIY engraving anytime and anywhere just through a smart phone or a tablet. This can also support USB connection with PC. The specialized software can help to edit the picture and monitor the engraving process. This has a adjustable laser head. It is very easy to adjust. This is So easy to use. It is lightweight and durable. Just the right size, so it can easily be placed in smaller places. You can use this for all kinds of things. Fun to watch as your picture grows. This can even do a lot of fine details. Fun for the whole family. Warning. A child should never use this alone. I love mine. I used it on a small block of wood and made a palm tree. Very nice. Great to have around. Perfect to have on hand. This would make a wonderful gift. Very fast shipping

    Is this helpful? (0) (1)

  • By geeno

    February 18, 2017

    This review has a good chance of going up or down. I received my printer and was able to decipher the instructions. The manual is worthless and saying it is broken English would be a compliment. Meterk recommends Android operating system for Bluetooth, as iOS may cause a long time in downloading to machine. I would say it takes 3-4 minutes to transfer via Bluetooth to the printer from my iPhone 7= or my iPad Pro. I need to dig out the old galaxy tablet and see if it is any better. The Bluetooth lets you make an okay print from a jpeg file but has no editing available. Now my real problem the included software won't "unzip" the file comes up as corrupted. I have tried opening this on 6 different computers and 3 different operating systems (XP, Windows 7 and Windows 10) with 5 different zip programs. I have emailed their customer service to find out if there is a download package for the software if not it look like this guy is going back. They did get back and the new software didn't work. Took a YouTube/Google search to find a link that provided software that works. I am happy. I just have to remember it is not a GlowForge it is an entry level unit and functions has such.

    Is this helpful? (0) (1)

  • By robin

    January 8, 2017

    Awesome! I might suggest  eBoot 10 Pieces Sticky Gel Pads Non-slip Pads Cell Pads Anti-slip Mats for Wide Applications, Black  I used these in place of the rubber bands. They are also sold in smaller packs. This makes loading and securing the item to be engraved much easier and quicker for me. The engraver works fine for an image up to 42mmx42mm. Laser moves side-to-side and platform for material moves front-to-back. Pros: Once an image is loaded to the device, you can print disconnected from pc. Can type text in the software to create an image PC software allows you to increase burn time Cons: I couldn't get the iOS software to work Rubber bands were a little cumbersome PC Software would be nice if it zoomed in(only zooms out) to allow scaling Awkward(minor) problems with pc software

    Is this helpful? (0) (1)

  • By a***i

    December 26, 2017

    This is good itam free fast deliver in Pakistan

    Is this helpful? (0) (1)

  • By a***v

    May 19, 2018

    100% Positive 100% Excellent and 1000 Thanks for you very good Service&Atention.

    Is this helpful? (0) (0)

  • By r***s

    May 19, 2018

    Perfect !!! All Rights !!! Wunderbar !!! TUTTO OK !!! POWERFULL !!!

    Is this helpful? (0) (0)

  • By R***4

    April 3, 2018

    All around good seller. We will shop with them again.

    Is this helpful? (0) (0)

  • By n***z

    January 23, 2018

    Very good transaction, good product quality, thank you

    Is this helpful? (0) (0)

  • By Cox Consulting

    January 10, 2018

    This unit is easy to operate. However the small engraving field limits the amount of products that can be used by the device. I have purchased 5 total and 9verall happy with units.

    Is this helpful? (0) (0)

  • By G***N

    December 20, 2017

    For the money this is great! For those who can’t get it to work on certain material, read the instructions. You can adjust the intensity. It works just fine Burningwood. Does a good job. I would buy it again.

    Is this helpful? (0) (0)

  • By t***g

    November 28, 2017

    Fast shipping, product works as expected.

    Is this helpful? (0) (0)

  • By k***t

    April 6, 2017

    Fast Shipping. Great product with surprisingly high quality performance.

    Is this helpful? (0) (0)

  • By richard ponce

    February 24, 2017

    This thing is Amazing! Loaded the drivers and software on my WINDOWS 10 PC and I was up and running in less than 5 minutes. Software is very easy to use. Load your black and white illustration(Can't do Gray Scale images!), resize the image if needed, send image to machine, and the press the start button. That's basically it. Being that it has BLUETOOTH 4.0 it works great with my iPad Mini 2 and iPhone 6+ . Free software download for iOS and Android. Very happy with product! My buy another!

    Is this helpful? (1) (0)

  • By p***t

    December 6, 2016

    The quality is very good! power. enough for wood and plastic. metal does not take.

    Is this helpful? (0) (2)

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Ostatnio oglądane

NASZE STRONY UCHWYTU PLIKÓW COOKIE

TOMTOP wykorzystuje pliki cookie, aby zapewnić najlepszą jakość zakupów. Jeśli będziesz nadal korzystać z naszych usług lub założyć nowe konto, założymy, że akceptujesz naszą Politykę prywatności.

Powiedz nam, który produkt chcesz kupować grupowo

Click the refresh verification code