Ulubione

Najedź, aby powiększyć

Pilot bezprzewodowy wyzwalacz Speedlite transceiver Nikon YN-622N 2.4GHz 7 kanałów 1 / 8000s

Pilot bezprzewodowy wyzwalacz Speedlite transceiver Nikon YN-622N 2.4GHz 7 kanałów 1 / 8000s

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
  • Niemcy Magazyn
  • Hiszpania Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china
QTY:

Każdy użytkownik może kupić tylko 5 Kawałek

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Ochrona kupującego

  • Pełen zwrot kosztówJeśli nie otrzymasz zamówienia
  • Pełny lub częściowy zwrot pieniędzy , Jeśli przedmiot nie jest zgodny z opisem Ucz się więcej >
Cechy:
Obsługiwany tryb lampy błyskowej: i-TTL, ręczny błysku.
synchronizacja migawki: Synchronizacja na przednią kurtynę, synchronizacja na tylną kurtynę migawki, hi-speed sync (HSS / FP), najwyższa prędkość synchronizacji 1 / 8000s.
Wsparcie zdalne ustawienie parametrów błysku przez transceiver (tryb zdalnego sterowania).
Pomoc i-TTL, ręczny, powtarzając tryb lampy błyskowej zastosowań mieszanych. (Mix tryb sterowania)
Wspierać Flash na (błysk na wierzchu) i obsługuje funkcję nadajnika i-TTL.
Obsługują jednostki nadrzędnej na nadajniku ustawia parametry każdej grupy. (Tryb sterowania master)
Wspierania funkcji FEC, FVL.
Pomoc błysku modelującego i czerwonych oczu Błysk z redukcją efektu.
powiększanie błysku Pomoc. (auto)
Wbudowana Wspomaganie AF emiter (lampka AF).
Ustawienia zapisane automatycznie.
Kompatybilny z serii lamp błyskowych Yongnuo / Nikon.
Port PC Pomoc wyzwalanie błyski stroboskopowe.
Wsparcie dla portów PC przód / tył sync kurtyna i wysoka prędkość synchronizacji funkcji (super sync).
Wspieranie pojedynczej kontaktu kamery i błysk wyzwalania. (Maksymalna prędkość synchronizacji 1 / 250s)
Na kompatybilnych kamer / flash z funkcją TTL.

Kompatybilny Lista kamer:
Nikon D70 / D70S / D80 / D90 / D200 / D300 / D300S / 600 / D700 / D800 / D3000 series / seria D5000 / D7000 series
Kompatybilny Lista błysk i-TTL:
Dla YN465N / YN467N / yn-468N (II) / YN565N / YN568N
Nikon SB-400 / SB-600 / SB-700 / SB-800 / SB-900 / SB-910

Specyfikacja:
Typ systemu: Cyfrowa bezprzewodowa 2.4GHz FSK transceiver
Odległość: 100m
Kanał: 7
Tryb pracy lampy błyskowej: i-TTL, ręczny błysku
Tryb Sync: Synchronizacja na przednią kurtynę, na tylną kurtynę migawki syce, hi-speed sync (Auto FP)
Grupy: 3 grupy (A / B / C)
Czas synchronizacji: 1 / 8000s
Wejście: Hotshoe
Wyjście: Hotshoe, port PC
Dotyczy baterii: 2 * AA bateria (akumulator 1.2V akumulator Pomoc) (baterie nie są dołączone)
Czas czuwania: 60 godzin
Wielkość opakowania: 12 * 11 * 5cm / 4,72 * 4,33 * 1.97in
Waga wraz z opakowaniem: 224g / 7,9 uncji

Paczka zawiera:
2 * Transceiver
1 * Instrukcja obsługi

Pytania i odpowiedzi klientów

Sortować:
3
Q

Will work with Nikon D750?

A
  • I just used these last weekend for a wedding. I assumed they would work just like they did on my D700 but THEY DO NOT. SOMETIMES they fire and most of the time they do NOT. I used a D750 with Lumopro LP180 flash units.

    By Mr Robot on May 11, 2018

(4)
1
Q

Will these triggers fire an ab800 in hss?

A
  • Yes Thank you

    By Dorsey on November 20, 2017

(2)
0
Q

Can you use on manual mode?

A
  • Definitely, Yes

    By Douglas Nelson Ganyo on July 2, 2018

(2)
0
Q

Will this work with nikon d850? the nikon su-800 does not. thanks.

A
  • I purchased this to pair with my Nikon D610. I researched the product itself to see if it was compatible. Maybe check that first? I'm not sure. :(

    By Portia on May 20, 2018

(2)
0
Q

Anyone know if this is compatable with the altura photo ap-n1001 speedlite for nikon?

A
  • Yes Thank you

    By Cameron on May 15, 2018

0
Q

Is it compatible with Metz 52 af1?

A
  • I believe that the YN-622N trigger are made for Nikon. I have tried them on Canon but they do not work. Not sure they will work for Metz.

    By Brooklyn Born on May 13, 2018

0
Q

What is the maximum range for these transceivers

A
  • I've tried it at 30 feet away and works fine. Some people tried it over 50 feet and works fine too.

    By Chris of VA on May 9, 2018

0
Q

The flash foot thing for YN-568EX doesn't seem to fit this trigger/reciver. Is there a special foot/stand for it?

A
  • Hi Solitude, our YN622N-KIT is absolutely compatible with YN568EX N.

    By López on May 11, 2018

(1)
0
Q

Can I use the Yongnuo system to trigger Speedotron D802 power system with the correct cords?

A
  • sorry not sure

    By Montagna on May 9, 2018

(3)
0
Q

will it work with D 5300 nikon & 685 yongnuo flash?

A
  • Yes, the 685 is compatible with the 622 Yongnuo system

    By Mayu Fujimori on May 14, 2018

(1)

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.8

oparte na 297 Opinie klientów

  • 5 gwiazdy
    82%
  • 4 gwiazdy
    18%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By Robert B.

    December 20, 2017

    Flawless operation. Exactly what I needed. Once you get familiar with the operation they are simple to use, and produce great results if you understand the use of off camera flash systems. These are primarily for outdoor on location shoots, I have three SB700 flashes. I'm seriously considering the new Yongnuo flash as an addition, since the wireless is built in, but mixed reviews are cause for some concern, however if you need wireless control of any Nikon compatible flash, these units are just the ticket. I've used Godox and Pocket Wizard before, but these are far simpler and functionally more flexible. I'm using a D7200, D610 and 3 flash combo, so your mileage may vary, it may be camera/flash dependent, but so far, I'm very impressed. I won't be returning them, but I may get version two of the transceivers soon, just for USB and feature set. I'm sure I can pass these on to friends who want to learn the use of external flashes. 5 out of 5 stars!

    Is this helpful? (0) (0)

  • By Jerry Palmerino Jr

    December 20, 2017

    I bought these triggers as soon as I realized I needed High Speed Sync with my Nikon DSLR. I normally use Pocketwizard Plus X triggers, but they do not provide the capability to do HSS (High Speed Sync). These do and they are perfect. So far in my use, they have fired every time (but...see my note below). They are also simple to use. I watched some online videos for them that made everything perfectly clear. By the way, there are some options if you do not want to use HSS. A neutral density filter is one option. Note: The one thing I could not get these to do was utilize HSS with my manual Yongnuo flash. I am not sure if it was because it was a manual flash or not. They worked great with my Nikon flash though.

    Is this helpful? (0) (0)

  • By cbutler

    November 17, 2017

    I've done some preliminary i-TTL tests with my Nikon SB-600's and as a simple trigger for my Metz 60 CT-1 strobes. So far, good, but... Clearly, the practical way to use these units is with a Nikon SB-910 flash on-camera, as a master controller. I don't have one, but found a nice youtube video which showed how easy it is to set levels on the remote flashes with an SB-910. Without one, you get no visual feedback about levels, and too many non-intuitive button presses are needed to balance things. The Commander Mode menu on my D-600 is cumbersome to use, so I don't. Not much different from Pocket Wizards, so this isn't a complaint. My point: expect to pony up another $500 for an SB-910 if you really want usable i-TTL control of remote flashes. UPDATE: My first serious use was a failure, but it was cockpit error on my part. It's very easy to press a YN-622N button inadvertently, and I apparently did that at the gig. Re-testing later, I found these units to work properly. My advice: work with them a lot before relying on them. Good gear, but I wish they had a "lock" option once everything was set. PS: 4 stars, so far...

    Is this helpful? (0) (0)

  • By Argusi

    November 11, 2017

    I received these about a 2 weeks ago. After purchasing the YN-622N-TX and the YN-622N kit and using it for about a week, I bought 2 more transceivers. So far these things have done everything they are supposed to do. I've tested HSS, TTL and manual. Everything synced up immediately and worked perfectly. These triggers appear fairly well made and are fairly easy to use. The only tiny pain point are the knobs used to tighten them onto the hotshoe feel like they need a little lubrication when they are all the way up or down. I guess it's just the plastic binding a little bit. It's not a big deal, but it was enough for me to notice. First thing I did when I got the TX was install the firmware. This was the worst part of the whole experience. That was because the download is overseas and it took about an hour and quite a few attempts to get the fairly small updater and new ROM downloaded. Once I got past that, the installer worked fine and I was updated to the latest firmware. Keep in mind it does NOT come with a USB cable. So far, no significant complaints. Love these triggers!

    Is this helpful? (0) (0)

  • By Jdiop

    November 8, 2017

    I was looking for a wireless trigger to use in conjunction with my QUANTUM TRIO BASIC and both of my SB800 and the SU800. When I first got it I was not expecting to trigger my Quantum Trio Basic but I was wrong. I set up the unit on ITTL and the camera on TTL and shooting on Aperture priority using my Nikon d600. The flash trigger was set on channel1 and zoneA, the flash was set on fill flash the SU800 was set on TTL. The test shot was better than I expected the image was very clear and the YN622N was dead on. I am ordering two more units for the rest of my flashes. you do not have to take my word for it just try it and if you do not like it send it back. I will not buy the overpriced brand when this unit will do the same exact thing and even more. Again this is my opinion and my opinion only Good Luck I just bought two more unit because I was so happy with my previous purchase. If you own a quantum trio basic you will be able to use your flash off camera, if you do not own an SU800 get you one, you will be controlling the flash through the SU 800. I had to come back and update my post since I bought a second set of triggers.

    Is this helpful? (0) (0)

  • By Clint

    November 7, 2017

    I realized that I put this review up on the transmitters only, but I wanted to put it here too... I have been using these for a little bit - they work well. I hated all the guessing and checking for manual exposures, so I decided to get a light meter to take better control of my exposure. I'm using these with an YN-568EX. You have to run the 568EX in iTTL mode and use the transceiver to set the manual power. Here's the problem: in iTTL mode, the 568EX ALWAYS fires a pre-flash (even when the power is set manually from the 622N). So - the light meter sees the pre-flash. I'm not fast enough to catch the second flash with the meter, so I was stuck. If you search, for the Nikon system, there is some workaround using FV lock. There's another one using mirror-lock-up mode. Flash Havoc discusses this. But, I have a D5300, so neither of these options are available to me. I could try using a cord to sync, but that is cumbersome. So, here's the solution I found to balance manual off-camera flash and ambient with a light meter. We will separate the pre-flash from the regular flash, giving yourself time to only measure the regular flash: 1. Set your ambient exposure (without flash) how you like (over 1/200 sec, of course). Remember your shutter speed. 2. Program your light meter to your shutter speed and ISO settings for your ambient exposure. 3. Set your flash to rear-curtain sync. (This puts the real flash at the very end of your exposure) 4. Set your shutter speed to 1/2 seconds. (This separates the pre-flash and real flash - longer than 1/2 second doesn't work for some reason). 5. With any flash power, trigger an exposure. Take your flash meter reading off the second flash (the one at the end of the 1/2 second). 6. Make the recommended adjustments to your flash power based on the light meter reading. 7. Set the shutter speed back to what you determined at first. You might want to take your flash mode off of Rear Curtain sync. Take the shot. Congratulations - you should now have a balanced exposure based on your light meter. Of course, you might have to tweak a little bit to taste or based on the linear response of your flash. This is quite the process, but it's not terrible. To me, it's better than buying a new camera or pocket wizards and/or a new flash. A couple more tips: this flash/camera combo seems to work better at FEC (set on the camera) at -2.0. At -2.0 FEC, the pre-flash is equivalent to a 1/64 power manual setting. With this one piece of information, you can measure the pre-flash and make the adjustment based on what your meter suggests. But, to verify the actual flash, you need to do the procedure above.

    Is this helpful? (0) (0)

  • By justinflood

    November 5, 2017

    I've been continually surprised by the build quality and functionality of the products coming out of yongnuo for a while now. I started off with their manual flashes (yn560II) with manual radio triggers (rf-603), and have moved on to their higher end TTL versions (yn568ex) and YN-622N TTL triggers. I have to say, even regardless of price, these triggers blow most of the others on the market out of the water. They have a form factor similar to the Pixel King Triggers and seem pretty well built. Each trigger takes 2 AA batteries, and the battery life seems extremely good (gone through an entire weekend of shooting 4 weddings without recharging these and they kept on ticking, they didnt seem to show any sign of stopping even then). They allow for full control over the remote flashes as long as you are working with either Nikon or Yongnuo TTL flashes. Though I always use a Master flash on top of the YN622N hotshoe to do my controls as the up and down, long press/short press buttons on the trigger are a bit too fiddly and confusing to work through on a job. As far as I know the Nikon versions of these Yongnuo triggers basically translate Nikon's infrared wireless code into radio waves and decode it on the other end. Great news for us CLS users who love the system but hate that our flashes always have to be line of sight to be set off. The triggers have set off these flashes reliably from well over 100' away with obstructions in the way with no problems whatsoever. The range seems to be quite good. Also keep an eye out for the upcoming YN-622TX, Which is a master command unit for this system which is supposed to be coming out soon. It will have an LCD display which will allow you to graphically set flash compensation, power levels and groups without the need of a commander flash on the camera. I know I'll be getting one as soon as they are released. Yongnuo seems to be positioning themselves as a true heavy hitter in the strobist arena. Great work!

    Is this helpful? (0) (0)

  • By Enigma Networks

    November 3, 2017

    I have these on a NIKON SB910 and another on a YN560 III, they work great especially having the YN622 commander for the Nikon I am able to remote control the Nikon flash but not the YN as of now because it doesn't have TTL or such. Although now recently the YN 560 TX has been release where you can control your YN560III remotely which is WOW! cheap and great setup. I could have purchased 4 YN 560 III for the price of a SB 910 Nikon and use a YN 560 TX in that price to control all 4, because they have built-in transmitter. This is off-topic and I am stuck with the YN-622N and the YN-622N TX which work great with any flash but if I would have waited a little I might have purchased differently. These are highly rated but if you are reading this re-think on why you buying these and what you are using them for. My ideal setup would have been now using a 4 Way Flash Bracket inside a soft-box instead of a strobe, one outside and maybe another behind depends on what you shoot and how.... You can control all from one location/on camera controller. You can easily pack these flashes vs some huge studio strobes that will cost you upwards of a thousand or more. Bottom line is you cannot ever have enough gear, carrying it is another story.

    Is this helpful? (0) (0)

  • By Elle L

    October 30, 2017

    You can use this with other YN-622N units or you can also purchase the YN622N-TX transmitter if you don't have need of using your flash as the main commander/transmitter. However, if your set up requires you to have on camera flash as well as one or two other remote flashes, plus you want to have the capability of controlling those other remotes' flash power, grab one of these and put it on the hot shoe, stick your flash on top, set it to Master (at least for an SB-910), determine your channels and groups, choose your flash power for each group accordingly and fire away! Works well with not only Nikon flashes but can also be used with Neewer Nikon TTL compatible flashes. I have used it with the VK750II and it communicates well. You will not be able to see the flash power change on your flash's screen, but it is evident when firing. Really amazing alternative to the more expensive radio triggers out there. I suggest going to YouTube and going through some instructions there, much easier to follow than the instructions. The transmitter is not compatible with Yongnuo 605 transceivers--I tried. Have fun with this!

    Is this helpful? (0) (0)

  • By SomeNYCGuy

    October 29, 2017

    I had new a Pixel King Pro that didn't work with my Yongnuo 565EX flash, so I returned it. For about $40 less I got a pair of these triggers. I tested them with each of my flashes: Metz, Nikon SB700, and Yongnuo 565EX, and they worked flawlessly. The TTL worked fine, and after a few minutes I could adjust the flash compensation using the no-LCD interface. The interface for changing the settings is probably the worst part about these units. I wound up taking a gamble on a Debao SU-800 which provides CLS infrared interface with an easy LCD interface. I can slap that on these units for easier radio-remote control. Really slick. I have to say that Yongnuo has really improved in the last few years. I have some original Yongnuo manual flash and trigger units. They still work ok, but were really cheap and the flash wasn't reliable for power levels. The 565 and these triggers are world better than those units (which still work today). I've already purchased my second pare of these triggers. At some point, Yonguo is supposed to come out with a YN-622TX which will do what the Debao SU-800 does with these triggers. At that point I'll buy that because it will be compatible with these triggers. Overall, very happy with these units, and with the price. Worked the first time and every time as I expected.

    Is this helpful? (0) (0)

  • By Oscar Pallares

    October 29, 2017

    I like to try gear so i buy and sell quite often, at first i was using cybersyncs and i loved them, never had a missfire, the only bad thing was the sync cables but you get use to em. so i switched to phottix odins and i like them too, really had no complains great equiptment and cheaper than pocket wizards. so i recently sold the phottix since i barely use ttl, the only advantage was being able to change flash power from my camera, at weddings in a reception hall not having to walk across the room to adjust is priceless but again once i set my power the change can be adjusted with iso or aperture in camera so good bye phottix. i was about to go back to cybersyncs and decided to try youngnuo since a couple of my friends are using their 603s and so far so good. so i got the 622n 4 of em and 1 of their flash 565ex and i had done 1 wedding, 1 esession and 3 family outdoor portraits and i have not had any miss fires or problems at all, pretty easy to use once you learn where the buttons are it is just like using your camera. they are a little too big for my taste but for the price and what they can do you just can't beat em. i use Nikon so i got the 622N. give this guys a try it is worth it specially if you don't have tons of cash, i don't. [...]

    Is this helpful? (0) (0)

  • By NW MN Dad

    October 25, 2017

    I consider myself a high-end hobbiest/semi-pro photographer shooting mostly sports and perhaps a third portraiture. I picked up the off-camera flash bug about a year and a half ago, first picking up a Sunpak external flash followed over the course of the year by a Yongnuo YN-468ii at which time I discovered the possibilities with high speed sync flash. By this time, I had also acquired two pairs of the YN-603(?) wireless flash triggers, and after picking up a YN-568 EX speedlight capable of high speed sync soon realized I was limited in more ways than one with the Yongnuo 603 radio triggers, as those triggers don't offer TTL capability nor do they sync beyond 1/250 sec. That's all fine and dandy if you have no intention of attempting to overpower the sun with outdoor portraits and figure on doing most of your flash photography indoors or on dark and dreary days. These YN622N's, however, have done what they promised to do, that is to open up a whole new world in off camera flash photography. I can now "turn day into night" outdoors without the need to attach all manner of neutral density filters to lessen ambient light. Now I can just put these on the camera and the YN-568 EX and fire away. I did read some of the reviews on this product and noted one particular concern someone had about it not exposing TTL properly. I'm not sure if that's a variation in quality control on Yongnuo's part, as I've also read mixed reviews on Yongnuo flashes too, but I currently own the YN-468ii and YN-568 EX flashes as mentioned above as well as the earlier 603 flash triggers and now these, and they have all performed flawlessly. Maybe I just won the lottery, but for the price of these things and their descriptions, I'd say I got my money's worth and then some every time I've ordered a Yongnuo product. I also picked up a YN-560 EX as a TTL slave flash and found that works nicely as a kicker behind my subject triggered by the YN-568 EX mounted on the YN-622N for studio portraiture. In short, I'm a very satisfied customer, as I can't imagine how much money I would have spent for the equivalent in Pocket Wizards and namebrand Nikon gear to round out my camera bag.

    Is this helpful? (0) (0)

  • By CPE

    October 6, 2017

    I recently purchased these items for off camera flash use on a Nikon D750: 1. YN-568EX flash 2. YN-622N-USA i-TTL 2.4-GHz Wireless Flash Trigger Transceiver Pair for Nikon 3. YN-622N-TX i-TTL Wireless Flash Controller While all the components worked well together, the flash controller initially did not appear to change the flash settings as promoted. After several hours of searching I finally found out an answer. On the nikon version, the numbers etc will not change on the speed light itself; however, they do change when the 622 relays that information to the speedlight as though it were a TTL signal. Thus, when you still make adjustments manually, those adjustment do occur as output on the flash. Like others have observed there is no viable customer support or youtube tutorials and the manuals are poorly written. Surely it wouldn't cost that much to hire someone to clean these up. For the money it is probably worth the purchase as a means of getting used to off camera flash.

    Is this helpful? (0) (0)

  • By Mr.R

    August 26, 2017

    Wasn't going to write a separate review on this, but changed my mind (see my YN-622N-TX review for more details). These are great! Except for the power switch. Oh yeah, and the awful instruction manual. A 3-star was a little too harsh, in spite of the dreadful instruction manual. This is only because they are so reliable in my experience. They lose a star for the two issues above. If you couple these with the YN-622N-TX controller...Wow! They are my favorite wireless triggers to date. I have tried two others (CBS & some other off-brand - those were unreliable). The on/off-switch is too easy to accidentally turn ON when stowing them in my gear bag. Diligence generally avoids this and extra batteries mitigate the issue. Forget about the instruction manual. Holy Cow, why can't these companies hire an actual American English technical writer. If not for the YN-622N-TX, these would be only useful as dumb triggers. It is too complicated to attempt their complex remote button pushing to wirelessly control other transeivers process...that is assuming you spend lots of time deducing what they are trying (but failing) to communicate in their manual, along with lots of trial-and-error. No thanks! I wasted enough time learning that process only to have it be realistically unworkable during jobs. Bottom line, if you buy these alone and want to use the advanced features of remotely controlling the output of other lights, then you are a glutton for frustration. Instead, also buy the YN-622N-TX and you will be singing their praises like I do. These are reliable, but they really need that TX unit to control them - from a practical perspective. Incidentally, the TTL features work flawlessly in my experience...kudos!

    Is this helpful? (0) (0)

  • By Thetreeman

    August 22, 2017

    These work and are really easy to use once you decode the chinglish they are written in. I have the ones compatable with NIkon and if you have nikon compatable flashed that support the iTTL they will adjust the flash from the transmitter mounted on the camera and make it easier to control the amount of light in the groups. They can adjust in 1/3 fstops and complete f stops. However, it is not a direct comparason of the flash adjustment using the CLS. I haven't tested them to the maxium distance but I did use them without line of sight and they worked fine at about 50 - 60 ft in the application I used them in. If you do not have Nikon compatable flashes they still function in the manual mode you just loose the ability to communicate adjustments between the camera and the flash or light. They still trigger the lights. I used them with Nikon flashes SB600 and SB900 in one setup. I also used them in a set up with the 600, 900, and a couple monolights (that were not adjustable) Keep in mind you are not adjusting them with the Camera CLS settings. The adjustments are done by using the triggers settings but if the lights do not have the capability to be adjusted with the CLS they can not adjust those lights. However, I could mix them and have some adjusted and some not. I just put them on different groups. They were confusing to learn how to use. I went to the internet for some help and found that these sites were so much better than the instructions that came with them. These made them easy to understand and now they are very easy to use. I found the instruction manual almost worthless. [...] [...] [...] I have not exercised all the specs to the limit but I have used them a number of time and they work fine. They probably are not as easy to use as pocket wizards but then for the cost of being able to control 1 light with PW you can control 3 with these. I am not a pro photographer so these fit my budget and applications.

    Is this helpful? (0) (0)

  • By SH

    August 19, 2017

    The goods arrived fast in a bubble-envelope, which concerned me a bit. Luckily, I don't see any damage of it. They are packed neatly in a small box. The product seems to be nicely built. I quickly tested it with my D7000, SB-400 and YN-468ii flashes right out of the box. I shot at a scene with white background. A quick summary is as follows (about 200 shots in total): With SB-400: 1) SB-400 on D7000 hot-shoe: the exposure is right on the spot 2) Off-camera (ie. SB-400 on the remote YN-622n): the exposure is about -1/3 EV 3) Pass-thru (ie. SB-400 on the YN-622n and YN-622n on the D7000 hot-shoe): the exposure is about +1/3 EV With YN-468ii for Nikon: 1) YN-468ii on D7000 hot-shoe: the exposure is right on the spot 2) Off-camera (ie. YN-468ii on the remote YN-622n): the exposure is way over (about +6 EV)! 3) Pass-thru (ie. YN-468ii on the YN-622n and YN-622n on the D7000 hot-shoe): the exposure is about +1/3 EV Although the Y-468ii is not the product that I am reviewing here, it's quite interesting to find that YN-468ii isn't working well with its own sister YN-622n! I gave it 4-star for the following reasons: 1. All functions are working as advertized even the operation is confusing at the beginning. 2. As many reviewers said, the User's Manual needs a major improvement even I could figure it out by reading it a few more times. 3. The settings can be accidentally changed by pressing/touching the buttons unintentionally when turning on/off the power switch. 4. There is no 1/4-20 thread at the bottom of these units so that I can attach it directly on top of my stands.

    Is this helpful? (0) (0)

  • By Al Ver

    August 9, 2017

    I have a little more experience with triggering manual flash. I use Yongnuo manual flash and even the old Nikon SB 28 with the Nikon D 600. Lately, I have been doing more even photography and have no time to set up the flashes manually. I purchased a SB 700 used at a local camera store and needed to trigger them wirelessly with i-TTL. When I heard Yongnuo came out with these new triggers, I waited for a while until I read some reviews about the new triggers. Now that I own them, using them is very simple. The user manual it came with was a little bit confusing but I was able to figure it out. I suggest practicing and getting used to adjusting exposure compensation from the device so you don't look dumb fiddling with your gear in front of clients. Gave it 4 stars cause these triggers are not integrated with Nikon's CLS.

    Is this helpful? (0) (0)

  • By Tom Tribble

    August 5, 2017

    I really like these Yongnuo YN622N ITTL triggers, so far. They are doing everything they are supposed to. The manual/instructions are a bit confusing, but once you get your head around it, operation is fairly simple. There are lots of good sources on the web with reviews and easier to follow instructions, which I found helpful. I have played around with the TTL mode quite a bit and it seems to be working like it should. Personally, I prefer shooting manual/manual flash. With these, I am able to make my manual flash exposure adjustments at the transmitter. I have also used my Nikon SB910 as a Commander flash unit on top of the transmitter. That works well, but makes for a cumbersome top heavy setup, at least for me. These are definitely not Pocket Wizards, but they are an awesome value at a fraction of the price.

    Is this helpful? (0) (0)

  • By TomI

    July 26, 2017

    I am real pleased with the unit now that I have it operational. The manual is a very good translation however the firmware update website to me was a little confusing, for some reason I kept installing firmware 1.02 when I should have been downloading firmware 1.05. The incorrect firmware download (1.02) cause the screen to go crazy. with unreadable symbols.I just couldn't figure out the problem (at 79 kind of old and slow) I live in a small town in Mexico so sending it back was almost as expensive the unit. Don't laugh (and I recommend NOT trying it), but I took the crazy thing apart looking for a bad solder connection, broken wire etc. NO LUCK as a matter of fact I found a very clean uncluttered well thought out set of wiring and boards. Put it back together and then got to thinking about the firmware update. The unit had worked before I updated but not after mmmm Went back to the website reread, and found the proper firmware installed it and BINGO! The rest is history. Wonderful machine well built with many features Tom Ireton LaPaz Mexico

    Is this helpful? (0) (0)

  • By craig hill

    July 22, 2017

    I have a Nikon d3200 and I bought four of these triggers. They all work and do what they say. my camera does not support high speed sync so have not tested that out yet. But they will shoot at 1/200 of a second every time no problem. I'm very happy with the purchase. I wish I could tell you more but I am definitely an amateur.. And I only had one cheap trigger set to compare it to. I will say that the other trigger set Will let me shoot over 1/200 of a second but you still get that black line at the bottom of your images. So I guess it really doesn't matter with the d3200 But I'm hoping when I upgrade my camera that I will be able to test the high speed sync..

    Is this helpful? (0) (0)

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Ostatnio oglądane

NASZE STRONY UCHWYTU PLIKÓW COOKIE

TOMTOP wykorzystuje pliki cookie, aby zapewnić najlepszą jakość zakupów. Jeśli będziesz nadal korzystać z naszych usług lub założyć nowe konto, założymy, że akceptujesz naszą Politykę prywatności.

Powiedz nam, który produkt chcesz kupować grupowo

Click the refresh verification code