14th Anniversary Celebration

Ulubione

Najedź, aby powiększyć

Yongnuo YN-622C Bezprzewodowy wyzwalacz TTL do Canon 7D Transeiver 5DII 5DIII 1DIV 1DIII 5D 2.4GHz 1 / 8000s

Yongnuo YN-622C Bezprzewodowy wyzwalacz TTL do Canon 7D Transeiver 5DII 5DIII 1DIV 1DIII 5D 2.4GHz 1 / 8000s

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china
QTY:

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice
Dodaj do ulubionych

Dzielić:

Ogólny opis:
YN-622C E-TTL bezprzewodowego wyzwalania błysku jest wysokiej jakości Master i Slave sprzęt wielokrotnego fotografii miga, za pośrednictwem cyfrowego FSK bezprzewodowej transmisji radiowej 2,4 GHz i różnych efektów fotograficznych mogą być realizowane poprzez ustawiania lampy błyskowej na 360 stopni. Jego odległość od pilota dociera 100M, wspierając 7 kanałów bezprzewodowych i A / B / C na trzy grupy.
podczas korzystania z serii EOS cyfrowe lustrzanki firmy Canon, który obsługuje funkcję zewnętrznej lampy błyskowej, takie jak stosunek TTL lub ręcznie ustawione każdą grupę błysku zdalnie zmieniać tryby i parametry lampy błyskowej szybko. Pomoc szybka synchronizacja, maksymalna prędkość synchronizacji 1 / 8000s. Wsparcie E-TTL, Tryby ręczne i Multi Flash. Wsparcie E-TTL instalowanie na szczycie nadajnika.
YN-622C 2 transceivery Zestaw składa się z dwóch podobnych nadawczo-odbiorcze, obsługują jedną kamerę sterowania wieloma pulsuje w tym samym czasie. Zainstalować miga z odbiornikiem dokupieniu aby je w formularzu zgłoszeniowym wielokrotnych błysków, ilość odbiorników nie jest ograniczona.

Cechy:
Kompatybilny tryb błysku: E-TTL (II) / Ręczny / Multi.
Kompatybilny synchronizacji migawki: 1 kurtyna, 2. kurtyna, wysoka prędkość synchronizacji (HSS / FP), max 1 / 8000s synchronizacji prędkości.
Zdalne sterowanie lampą błyskową za pomocą ekranu menu sterowania błyskiem aparatu (tryb zdalnego sterowania).
Wsparcie E-TTL / ręczny / Multi mix tryb lampy błyskowej przy użyciu (Control Mode Mix).
Flash na gorącej stopki nadajnika obsługuje ETTL.
Wsparcie Flash Kompensacja ekspozycji (FEC).
Wsparcie Flash Bracketing ekspozycji. (Luty)
Pomoc Blokada ekspozycji lampy. (FEL)
Modelowanie obsługiwać Flash.
Stosunek Pomoc E-TTL grupę (ALL / A: B / A: BC).
Pomoc Instrukcja / grupa Multi (ALL / A: B / A: B: C).
Pomoc powiększanie błysku (automatyczny, ręczny).
Pomoc Wspomaganie AF emiter (lampka AF).
Port PC Pomoc wyzwalanie błyski stroboskopowe i wsparcia 1, 2 kurtyny / HSS (Super Sync).
Pomoc LCD Live View wyzwalania.
Wspieranie szybkiego fotografowania ciągłego spust.
Ustawienia zapisane automatycznie.
Kompatybilny ze wszystkimi błyskami serii YongNuo / Canon EXII.
Wspieranie pojedynczej kontaktu kamery i błysk wyzwalania. (Maksymalna prędkość synchronizacji 1 / 250s)

Kompatybilny z:
Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark II, 7D, 60D, 50D, 40D, 450D, 500D, 550D, 600D, 650D, 1000D, 1100D. (EOS DSLR aparat fotograficzny z menu sterowania zewnętrznymi lampami błyskowymi)
Canon 5D, 10D, 20D, 30D, 300D, 350D, 400D, 1D, 1D Mark II. (EOS DSLR Camera bez menu sterowania zewnętrznymi lampami błyskowymi)
Canon 600EX (RT), 580EXII, 430EXII, 320EXII, 270EX (II) i YongnuoYN-568EX, YN565C, yn-468C (II), YN-467C (II), YN-465C (Wspieranie bezprzewodowego pilota poprzez menu aparatu )

Uwaga: 430EX, 550EX i 580EX lub innych części lampy błyskowej nie jest obsługiwane zdalne sterowanie poprzez menu aparatu, należy ręcznie ustawić parametry flash.

Specyfikacja:
Typ systemu: Cyfrowa bezprzewodowa 2.4GHz FSK transceiver
Odległość: 100m
Kanał: 7
Tryb pracy lampy błyskowej: E-TTL (II), ręczna lampa błyskowa, wielo błysku
Tryb synchronizacji: 1 kurtyna, 2. kurtyna, hi-speed sync
Grupy: 3 grupy (A / B / C)
Czas synchronizacji: 1 / 8000s
Wejście: Hotshoe (TTL, styk główny)
Wyjście: Hotshoe, port PC
Dotyczy baterii: 2 * AA bateria (akumulator 1.2V akumulator Pomoc) (baterie nie są dołączone)
Czas czuwania: 60 godzin
Wielkość opakowania: Ok. 12 * 11 * 5cm / 4,72 * 4,33 * 1.97in
Waga wraz z opakowaniem: 234 g / 8,25 uncji

Paczka zawiera:
2 * Transceiver
1 * Instrukcja obsługi

Pytania i odpowiedzi klientów

Sortować:
5
Q

Does this work with the Canon 6D?

A
  • Partly works with my 6D and two 430EX II. Indoor fairly lit ETTL works. Darker circumstances and sett to A:B something happens and group B fire at 1/1. Have changed/reversed receivers/transmitter and flashes every possible way but still the same Group B fire 1/1. Turn on some light in the room and it works again. Makin… see more Partly works with my 6D and two 430EX II. Indoor fairly lit ETTL works. Darker circumstances and sett to A:B something happens and group B fire at 1/1. Have changed/reversed receivers/transmitter and flashes every possible way but still the same Group B fire 1/1. Turn on some light in the room and it works again. Making a hard reset on any YN622C (press Channel and Group selector simultaneously and hold) make it work in the "dark", one time then its back to Group B faults. Set to "ALL" no problems. Group A:B + C works but i have only tried with one flash in A:B, and dont remember if I tried booth A and B group on the reciver. This problem when its "dark" doesn't occur on the 60D I've tried it on. But overall one have to bump it 3/4 to 1 stop to get the same light as Canon "normal". Manual it seems to work as it should. My YN622C is marked "2014 Dec". earlier versions did have som sorts of other issues. Check out http://photography-on-the.net for better Manual than the accompanying Youngnuo manual. see less

    By Pre Mol on May 15, 2018

(2)
2
Q

How does ETTL compare to ITTL?

A
  • Canon, Nikon and Pentax each have their own TTL flash metering systems, respectively E-TTL, i-TTL, and P-TTL. They all use a weak pre-flash that is metered and used to calculate flash power level required for correct exposure. E-TTL = Evaluative "Through the Lens", i-TTL = Intelligent "Through the Lens", P-TTL = Prefl… see more Canon, Nikon and Pentax each have their own TTL flash metering systems, respectively E-TTL, i-TTL, and P-TTL. They all use a weak pre-flash that is metered and used to calculate flash power level required for correct exposure. E-TTL = Evaluative "Through the Lens", i-TTL = Intelligent "Through the Lens", P-TTL = Preflash "Through the Lens". All three are pre-flash based evaluative flash metering systems. see less

    By Paul on March 5, 2018

(2)
2
Q

How many triggers comes in the box? Two or just one for the 80 something dollars?

A
  • You have the option of purchasing singles, pairs or I have even seen some package three together. However, for the apx $80 you are referring to includes a pair of triggers. Good luck!

    By Drpete on January 31, 2018

(3)
1
Q

Today I just got the 622C and Flash is always firing at full strength. I am using Canon 6D. Do I need to do any additional settings ?

A
  • Hi Before we continue givibg suggestions. What flash do you have? I know you have a canon 6D and yn622c.

    By Javier Rivera on May 8, 2018

(3)
1
Q

I'm planning of buying Canon ST-E3-RT after borrowing it to test it with my Canon 600ex RT (Amazing). Will this Yongnuo do exactly what ST-E3-RT do?

A
  • The comments about the 622 are correct. However, there is an additional option: the 622C-TX. This transmitter (only) unit is designed to be an alternative to the ST-E3-RT. I don't own an ST-E3-RT, but shot with someone that had one. The ST-E3-RT and the 622C-TX are functionally very similar. You can control the flash u… see more The comments about the 622 are correct. However, there is an additional option: the 622C-TX. This transmitter (only) unit is designed to be an alternative to the ST-E3-RT. I don't own an ST-E3-RT, but shot with someone that had one. The ST-E3-RT and the 622C-TX are functionally very similar. You can control the flash units through the camera menus, and you can also control the flash groups and multiple settings on the 622C-TX unit directly. see less

    By Dave on October 22, 2017

(4)
0
Q

will this work with my vivitar df-583

A
  • Don't know much about Vivitar Flashes but I doubt it. The flash (it self) would have to be ETTL of course but there are two models of the 622 C & N 1 for Cannon and 1 for Nikon your best bet would be to purchase a Yongnuo 565 EX flash also (about $105.00). Actually I have found the 603 & 560III flash (in manual mode) g… see more Don't know much about Vivitar Flashes but I doubt it. The flash (it self) would have to be ETTL of course but there are two models of the 622 C & N 1 for Cannon and 1 for Nikon your best bet would be to purchase a Yongnuo 565 EX flash also (about $105.00). Actually I have found the 603 & 560III flash (in manual mode) gives me much more consistent results, but then again I rarely shoot on camera flash see less

    By m. Abdullah on May 15, 2018

0
Q

Will this allow me to do rear flash curtain sync on my Canon 60d with a Yongnuo YN560-II external flash?

A
  • I cannot speak to your setupI have a Canon 5d and a 600 flashit does allow me to do second curtain high speed syncI believe the 60 dwould be okay but I'm not familiar with a 560 flash

    By Henry on May 16, 2018

(1)
0
Q

Do these have High Speed Sync capability?

A
  • Yes Thank you

    By Shining Star Photo INC SELLER on May 15, 2018

0
Q

Will this work with a Sigma E-500 DG? Sounds amazing!

A
  • No idea, but their flashes are very nice and worth it.

    By Seneca Riggins on May 16, 2018

0
Q

I have a Canon 50D and a assortment off flashes including two YN-560's, a 430ex2 and a 420ex. What is the max shutter-speed using these flashes? HSS?

A
  • it is compatible with flashes that have HSS. for example, with my yn568 II it can sync up to 1/8000. but with the yn560 it will not have HSS

    By cy on May 14, 2018

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.8

oparte na 649 Opinie klientów

  • 5 gwiazdy
    84%
  • 4 gwiazdy
    16%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By YW

    December 26, 2017

    I really wanted to explore off camera flash so I read the book on canon flash by Syl Arena and bought a long cable from him. Short while after Canon came out with the 600ex-rt flash. I bought it and loved it. But in order to trigger it off camera I'd have to use a long cable. Even at home I found that inconvenient and was sometimes concerned that someone could trip on the cable. I could buy another 600ex-rt and maybe the st-e3. I thought I would further invest in wireless flashes. But then since I don't do photography for a living it's hard to justify hundreds of dollars for a flash when I could use the same money on lenses. Fortunately I came across this Yongnuo trigger. It's pretty easy to use. Fresh out of the box I was able to test shoot it already. Didn't really have to read the manual. Now I can finally enjoy off camera flash although looking back I didn't really need 600ex-rt. Perhaps 580ex II would have sufficed. Anyway, now with a couple of hundred of dollars I could invest in two Yongnuo flashes and four triggers. At least that's the plan in my mind. =)

    Is this helpful? (0) (0)

  • By JT

    December 21, 2017

    So I threw my Pixel King units in the trash shortly after these arrived. I have absolutely NOTHING BAD to say about these units. I have used them relentlessly for tens of thousands of clicks and have had zero failures or misfires. The added benefit of being able to have a flash on top of the camera trigger is an added benefit. the fact that the triggers speak HSS insures that I can use them outdoors for sporting events, and can even trick a standard studio strobe into operating in HSS mode. I can't say enough good things about these triggers. FOR CERTAIN - if you are considering Pixel Kings, STOP HERE. Buy the Yongnuo's and you will never regret it.

    Is this helpful? (0) (0)

  • By Lorence

    December 7, 2017

    This wireless trigger worked well as described. I had the PixelKing and I didn't like how it didn't support passthru. It never made sense to me that it has a hot shoe mount for no reason and they never bothered updating it through firmware. Anyways, I was able to control my 430exII flash manually on my camera and take some amazing reception pics. I learned that you must change in from your camera flash settings not on the flash itself to make sure that it registers. I will definitely buy another transceiver soon or maybe even a yongnuo flash too.

    Is this helpful? (0) (0)

  • By deepsoul13

    December 5, 2017

    I unpacked the triggers, popped in some batteries, and there were ready to work. These triggers are stupid-easy to use in both ETTL II and Manual mode. I am using these with a Canon 7D and a 480ex II flash. I can control every single setting of the flash, wirelessly from the 7D menu's. These devices are also well built and do not feel "cheap" to hold. The hot shoe's are tight. Each trigger uses 2 AA batteries. I am very impressed with these triggers and would recommend them to anyone else with a Canon camera.

    Is this helpful? (0) (0)

  • By Law2708

    November 28, 2017

    I had seen the previews for these triggers a while back, and honestly it all seemed to good to be true.Then I saw the "blue matinee photography" video on youtube and I was blown away!These things just work,The ability to control everything from the back of my camera "Canon Flash System style rocks" Wireless ETTL -AWESOME Transceivers- AWESOME Manual Mode _AWESOME Canon Ratio control-AWESOME 2 under appreciated features of the triggers are the on trigger AF assist Beam The steal and widely unknown feature is the "super sync" This allows you to shoot well past you camera sync speed and wide open in daylight with large strobes.I have used these on my T1i as well as my 6D, no problems.My only gripe (reason for 4 stars) simple matter of concern.I wished they had included a usb,connection for updates and what not.But honestly for the price I am beyond satisfied!

    Is this helpful? (0) (0)

  • By Bruce Locatelli

    November 24, 2017

    I literally received these, popped in batteries, connected them to my camera and speed light, turned them on and started shooting. No setup, no problems, just success. At this point, I'm just playing around with them. But these were exactly what I wanted. I imagine there are better professional grade options out there, but for under $100 to be able to wirelessly use my speed light these are perfect. The construction is solid and everything points to these being well made. I also had a perfect experience in ordering, shipment and receipt. No issues and that's why I'm giving them 5 stars.

    Is this helpful? (0) (0)

  • By W. Xiao

    November 24, 2017

    It's all ready to go, once you connect one piece to your camera, and the other piece to your flash. I saw from the web that the sequence you switched on these are important. One poster say you should always turn on 1) the camera; 2) the transceiver on the camera; 3) the transceiver attached to the flash; and finally 4) the flash itself. But in real practice I found out even if I do not follow this sequence, things still work. One problem I came across (not sure if it's my user error, but so far I haven't found the solution yet) is when I attached a flash on top of the transceiver on the camera (I like to have a 270EX II on top of the transceiver on the camera, for fill light). But the problem is when I shoot in HSS, the exposure is not normal. Only one part of the photo is lighted, and the other part is blown out. If I remove the transceiver between the 270EX II and my camera, then this problem disappears. Update: It turns out to be user error. when attaching another flash on top, you need to push it all the way in. The last few times I didn't notice this and leave the 270 not fully slotted into the hot shoe of the transceiver. I guess that's the reason I got half exposed shots.

    Is this helpful? (0) (0)

  • By Jim

    November 9, 2017

    I am a professional photographer based in Virginia USA and have been using the Pocket Wizard Plus II for many years to trigger my Canon 580ex II's. I recently stumbled onto a review of the 622 on You Tube. I had been considering purchasing the Canon or Pocket wizard units to go full TTL but the price was prohibitive so I was excited to learn about the 622. Long story short, I ordered two of them. When I un-boxed them I found the quality to be excellent. The packaging was very good and the units were well protected. I used them in an executive portrait session at a country club recently and was very pleased with the results. I had one unit on camera and one in a Westcott 50" Apollo soft box set on manual. I controlled my output from the camera and it worked perfectly using my light meter to get exactly the exposure I needed without having to remove the translucent fabric on the front of the softbox as I had to do prior to using the 622s. In fact, I was so pleased, I ordered 2 more. I had another executive portrait session this week and used two 580ex's for main and fill lights I used manual settings again and used the camera menu to set my umbrella fill light one stop lower than the main light and the results were fabulous. I highly recommend this product and may even try the Flash Units made here so I can have controlled back-lighting.

    Is this helpful? (0) (0)

  • By VermontGuy

    September 26, 2017

    As an amateur, I tend to save my money for bodies and lenses rather than accessories. But when I saw the price of these triggers, I had to take the plunge. I couldn't be happier with the results. I have a set of four triggers controlled by a Canon 6D and controlling 580 EX II flashes and have used them for indoor product shoots and for both indoor and outdoor portrait shoots. In all cases they've performed almost flawlessly. I say "almost" because two of the triggers failed to start up immediately after I inserted batteries and flipped the "on" switch. Disappointed, I started pressing a couple of the other buttons, and voila, they came to life. Not an ideal startup procedure, but it worked, and they've fired up immediately ever since. Also since then, they've been wonderful. I tend to use them in manual mode, controlling flash output from the back of the camera. The channels and group settings make it easy (well, as easy as Canon's rather maze-like approach makes it) to control multiple flashes. And they've been extremely reliable for the past few months of weekly use. Pros: * Very affordable * Works for both E-TTL and manual mode * Good battery life, at least under modest amateur usage * Seem well made fit and finish wise compared with some other low-cost triggers I've handled Cons: *A little bigger than you might expect (almost a deck of playing cards in size) *Startup with two triggers was iffy but has been perfect since the first time *Channel and Group buttons are a *little* too easy to press. I've accidentally changed one or the other accidentally a couple of times. The bright LED indicators, however, make it fairly easy to identify the problem

    Is this helpful? (0) (0)

  • By Mike C.

    August 31, 2017

    I was going to get the cheaper flash triggers by Yongnuo, but since my DSLR has ETTL metering, I decided to go with this pair of triggers. They work excellent for "off camera flash", and are very functional beyond my current capabilities. They are stylish looking, and pretty durable. I just shot an external flash project at the Virginia City, NV 'Graveyard' using off camera flash for fill light on the headstones in very cold and stormy/windy weather. My Yongnuo 560II speedlite was mounted atop a tripod and blew over and hit a rock, I though for sure, the trigger was broken, and the flash that was mounted to it, but to my surprise they did not break! There was a dent/blemish on the flash where it hit the rock, but still worked like new!

    Is this helpful? (0) (0)

  • By Nathan

    August 24, 2017

    I love these triggers. My wife and I are professional wedding photographers, and we are forever having issues with our Canon flashes working consistently when remote. Many times the Canon systems will only work as line of sight, unless you are willing to drop a lot of money to upgrade to the new 600series flash. We have two Canon 580ex and three 430ex flashes, and these triggers work perfectly. All I really needed was a system that could help me light the dance floor even when people are blocking the line of sight. These triggers fit the bill, the fire all my flashes from hundreds of feet away, and even rooms away. The Ettl compatibility is great as now I don't have to set all my flashes manually and can do everything from my camera. These also blow my pocket wizard setup out of the water. They are less glitchy, work in about any configuration, and are way cheaper. Bottom line; if you need a systems that does not require line of sight, is simlpe to use, and uses Ettl, than these will not let you down. I love them, I am ordering more.

    Is this helpful? (0) (0)

  • By Gadget Lover

    August 22, 2017

    Very nice and inexpensive transmitter. I use this to trigger Yongnuo YN622C II receivers and they have worked without fail. Much less expensive than a Canon option and I'm so glad that I stumbled across this product. For the price, probably even aside from the price, these Yongnuo products are great and I am amazed how off camera flash has changed my photography, without taking all of my money. Of course, I have had flashes not fire, but I don't think I could ever trace the reason to this transmitter or triggers. My only problem that I had with this is the mount design. What I mean is that it mounts horizontally on your camera hotshoe. When you need to adjust your lights, and you always need to make adjustments to your lights, I would much rather have a vertical mount while shooting on a tripod. With the horizontal design, I (and I suspect most people, as I'm 5'10") aren't tall enough to look down onto the screen to make adjustments. This means you either need a step stool or you must move your camera off subject, tilt your camera so that you can see, then make adjustments. Of course, if you're off-tripod and just shooting freestyle, this is not an issue at all. Other than that, it's pretty easy to make any/all adjustments. You can control your flashes using TTL, Manual mode, and highspeed sync. I can't imagine anything that a Canon transmitter or Pocket Wizard could offer that this doesn't do at a MUCH cheaper price. As a matter of fact, after much research and comparing options, I was very close to purchasing the Pocket Wizard option when I came across this product. I am so glad that I chose this. Other than the fact that Pocket Wizard does offer a vertical design and maybe easier adjustments as a result, I can buy this transmitter and a bunch of triggers for the less than the price of a Pocket Wizard transmitter. Yongnuo option is a much better route because, with the same amount of money, you get so many more options in gear. In my view, this is a Pocket Wizard killer. I have only good feedback and would recommend this product.

    Is this helpful? (0) (0)

  • By Bradley Moore

    August 4, 2017

    This is my third try at finding an RF flash control for my Canon 60D Camera and Sigma 500 & 530 Flashes. This one works with both flashes set to ETTL Mode. I photograph houses for Realtors and often need a second flash to light adjacent rooms. I have been looking for an RF unit to simplify my workflow. There are two reasons for not giving a 5-star rating. First, it occasionally fails to fire the remote flash and, second, I have not found how to control the remote flash level from the camera. The instructions in the users guide are a bit short and of course, only discuss Canon flash equipment. I have looked on the Yongnuo site and have not found any other information. With the remote flash set to ETTL, i get a pretty good flash level, but can't adjust it. I have experimented with the ratio setting for A:B flash control but it does not seem to make a difference. If I set the remote flash to ETTL C1, it reads the camera settings for things like zoom but it flashes only very dimly and doesn't seem to be controlled from the camera. I will have to see how this system works on the job with different shooting conditions.

    Is this helpful? (0) (0)

  • By Raymond Brown

    August 3, 2017

    I use these triggers between a Canon 6D and the 600EXT-RT. I haven't even looked at the manual, I use my flash in manual mode - I can set the flash settings via my on board menu system in camera. Its like the trigger isn't even there or a consideration for me. I just turned them on and they worked, as if the flash was on camera. I will say that even though I have used them for about a year - my remote flash has always been within 20ft from me. So in that range - its been rock solid dependable. My second flash is a manual flash configured as an optical slave - a LumoPro LP180. In this configuration I only need 2 YN622's. One for the Camera, 1 for the Canon 600EXT-RT. The LumoPro LP180 fires when it sees the canon 600EXT fire. Perhaps when my flash skills increase I'll mess with the different options, but for me - in manual mode I am in complete control and I'm comfortable there.

    Is this helpful? (0) (0)

  • By Mark Serrano

    July 24, 2017

    Even though the YN-622C is China-made, its build quality and packaging are superb! It's lightweight but solid. I ordered 2 pairs (for a total of 4). The good thing about these transceivers are they are both triggers and receivers! Hit the test button on any of these transceivers and it will fire the rest of them! I've tested the devices last night, since I just got them yesterday. I've attached these YN-622C on the following devices: * Canon 6D with 50mm 1.4 * YN-560 III flash * 2 Canon 430 EX II flash I was in a low-light room, lit by a single flourescent buld. I was suprised first of all by the AF-assist of the device! My previous setup was a Canon 90 EX flash for triggering and 2 Canon 430 EX II. My 6D, with its legendary low-light capability, are having a hard time focusing. But with the YN-622C, it's able to focus on a black background without a hitch! It's amazing. Now here comes the best part. As soon as I start capturing photos, it wireless triggered my other flashes without any issues, even at 180 degree range. Initially I had problems with my Canon 90 EX flash trigger. Apparently it can only trigger at a short distance and at a very limited angle (maybe 90 degrees). But the YN-622C has no problem triggering the flashes at any angle and range. I've also mounted the YN-622C on a Cheetah Qbox 24 softbox on a Manfrotto lightstand. It's kinda bulky and added height to the flash that it won't fit anymore the flash inside the softbox speed ring. So I had to position the flash at a 90 degree angle. And that turned out perfectly great (By the way I was using the 430 EX II flash). Also, I've mounted the YN-622C on Manfrotto lightstand with a Stroboframe using the YN 560 III. So far no problems. If could only return my 90 EX and 430 EX II. As a side note the YN-560 III is also a great device to pair with the YN-622C.

    Is this helpful? (0) (0)

  • By Roy Ang

    July 20, 2017

    Back in the early days I got uber frustrated with the Pocket Wizard Flex system. The last straw was two brand new latest firmware transmitters with 10 brand new latest firmware receivers and a box (10) brand new 580EXII's and nothing was firing let alone consistently. Gave up on the kludgy socks and mounts "fixes"...switched to RadioPopper PX's. Damn expensive and cryptic interface...but they worked pretty consistently. BUT NOW...these kick butt. Bought 7 of them to push as many as 6 580EXII's and 1 as the master Sometimes using the pass through hot shoe feature on the master with both of my Canon 1DX's. Over the last two days - outside mid day, sunset, indoors with partial obstructions...fired off every time. Worked with older bodies, 1D4s, 5D (all gens) as well as a Canon SX40HS. Clustered 6 of the 580EXII's around the umbrella shaft in circular mounts in a big parabolic...worked perfect. Same setup with older 580EX's same consistent results. Super bang for buck...much easier to use than the RadioPopper PX's and way, way, way more consistent than the PW Flex debacle. Only weirdness...sometimes my cats and dog flashes (320EX and 430EX) will fire at full power. But I didn't spend a lot of time looking for a consistent pattern for the cause. I just adjusted flash exposure comp. The 90EX works as well as the 270's both I and II versions. Even an older 220EX. They use AA's...thank god no stupid, funky expensive not always available on location... CR this and CR that battery(s) Bottom line...glad I bought them. Absolutely NO regrets. The Radio Poppers are now relegated to the backup bag or the occasional crazy long distance maybe 5% of the time shoot.

    Is this helpful? (0) (0)

  • By Gary Stowell

    July 4, 2017

    Chosen because of the feature set for the money and I wasn't disappointed. Has features well beyond anything in the $85 trigger class. Most important features to me are: 1-TTL flash focus/metering for both remote and camera mounted flash. 2-focus assist beam. 3-mixed manual & TTL mode operation for all groups and channels. The only negatives are: 1-English instruction manual that must have been translated by a first year English student so it's hard to decipher. 2-too many functions for too few buttons. Button combinations are hard to memorize. 3-too easy to hit a button by accident and unknowingly screw up your setting. These triggers are almost the same price as the simple, low featured units so might as well get the better feature set.

    Is this helpful? (0) (0)

  • By Michael H.

    June 26, 2017

    This is a great alternative to the expensive E-TTL triggers and transceivers on the market. I've used this with the Yongnuo transceivers and it works great. I've pairs them with my Canon 580 EX II's and also with my Alien Bee B800 and my white lightning. ** ONE NOTE ** Make sure this is firmly attached to your camera and not sitting on top of a flash in the water and falls off when you go to move the flash. :-( reason I had to buy a replacement. They aren't water resistant or water proof. But if you need a reliable ETTL trigger set for your Canon equipment and you like shooting outdoors and on-location, these are a perfect solution. (SIDE NOTE: The one that was dropped in the water was immediately put in rice and left there for a week. Afterwards, it was powered up with new batteries and actually worked! They're not meant to work after being dropped in saltwater, but mine did. Sad to say, it went in the trash after being caught on the camera and the pin wouldn't release to allow it to slide off the hotshoe. Unfortunate.)

    Is this helpful? (0) (0)

  • By Watanabe Craig

    June 15, 2017

    Just received it today and been playing with it with both my Canon Speedlite 430EX II and my cheapo Sunpac Digiflash 3000 for Canon. 1) Works like a charm with the Speedlite, won't fire the Sunpac though. Just be aware that if you are using this trigger with cheap aftermarket flashes it may not work. 2) If you love to shoot 2nd Curtain Flash you won't be able to with the YN622 mounted unless you disable the Wireless Set function on-camera. 3) Love the AF assist light! I can now shoot in low light with no flash!! Just mount the transceiver on the hotshoe and let it do the rest. Love this feature. Setting channels and groups is a cinch. No need to read the manual. 4) Build quality is okay. Hot Shoe is a bit tight so if your flash doesn't fire when you shoot or fires full power despite using ETTL mode on your flash, chances are it's not mounted correctly. Considered this to be the problem with the Sunpac not firing at all, but everything looks solid on the mount. All in all I think the YN622 is pretty good. I wished the length of the transceivers were an inch shorter as the AF source light is about that much farther out than on the Speedlite. Actually more like 2" farther out. Not sure how that affects focus but so far so good. Why 4 and not 5? The transceivers' hot shoe mounts (albeit metal) is kinda tight making removal from my 5D MK II hot shoe a bit tedious at times. I almost think the hot shoe mount on my camera was gonna break if I applied too much pressure to remove the trigger. Maybe some dry lube on the slide rails of the hot shoe may help. Otherwise I'm happy with this purchase and have recommended to my friends who used me as the test bed for this product.

    Is this helpful? (0) (0)

  • By Amy Osborn

    June 3, 2017

    I would have given this a full 5 star rating had it not been for the difficulty I experienced in getting the thing to work out of the box. After a bit of digging on the internet, I came across a blog that reviewed them and suggested doing a factory reset if you have trouble getting the transceivers to work. This was extremely simple and did the trick. I bought these to replace Cowboy Studio's version of the wireless flash triggers, which I have owned for less than a year. While those worked well, the plastic hotshoe connection broke under the weight and movement of my flash & lightstand when shooting on site. That's when I began looking for an affordable alternative with metal hotshoes. I have only fired a few test shots with this and have ordered a 3rd tranceiver so that I can use a 2 flash set-up. I plan to update this later after working with the product for a while.

    Is this helpful? (0) (0)

Hot Event Jeszcze

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Recently Viewed