Cena dotyczy tylko aplikacji:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contactsotwórz to forum na całej stronie
oparte na 501 Opinie klientów
Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!Napisz Recenzję
December 31, 2017
First off, let me say I’ve used this a few times already just testing the waters, and I love it! I haven’t picked up the manual yet, but so far haven’t had to. It functions much like my canons, so finding a function isn’t a headache in the slightest. I’ve also heard people saying this flash doesn’t recycle well... were they using dead batteries? I can fire this quite quickly on high power with no disappointments. The only reason I’m not giving this a 5 is I was led to believe it controlled slaves via RT-type means, not via an optical flash signal.
December 26, 2017
The flash is a very cost effective alternative to the Canon brand flashes. I have used it only a few times yet it works very well with my Canon 7D. The battery door tabs break due to the pressure from the three batteries that push against the left side of the battery compartment door. I now have to order a replacement door from the manufacturer in China since the door no longer sits flush with the flash body. You can do a Google search to see what the issue is. Even with this issue I still recommend this flash. It is of very good quality otherwise and will save you several hundred dollars over the Canon equivalent. I received the replacement door and it was very easy to install once I watched a youtube video on how to do it. DO NOT manhandle the door when trying to remove it. You need to use a small flathead screwdriver to remove the door. See the video. Going forward I need to keep the batteries out of the flash or the same thing will happen to the new door.
By J. K.
December 12, 2017
I use this all the time with my Canon 6D and with the T3i. Love the rotation of the flash head and the ETTL functionality. I had problems with the battery door not closing all the way but got a replacement and the world is now perfect. It does go through batteries probably every 300-400 shots but that will depend on the power settings. Honestly I use it in manual mode more often than ETTL. I don't have experience with any other brand of speedlight but can't think of anything else I could want...I have read tons of reviews and I could not be happier with the real world use of the product.
December 9, 2017
May give it a 5 after some more use, as I have no complaints yet. Bought it shortly before going on vacation and it helped enormously for occasions where I needed fill-in flash. So easy to use on fully automatic settings and produced great results. It is pretty big and bulky, and on my Canon 5D Mk III not something you want to just walk around with it attached for long, but got shots I could not otherwise without a flash. I pondered splashing out a lot more on the Canon equivalent, but with my own level of experience and number of occasions I am likely to actully need flash, it did not make sense. Have not yet even had to switch to my second set of batteries, which surprised me. I thought the battery life would be more limited, not having owned a flash for quite some time.
December 9, 2017
this improved my canon t3i camera! took about a day to learn how to use an external flash. its all preference so i wont be posting how i use mine. i have taken about 50 shots with fresh batteries but i also keep the lowest auto off minutes it can set. i only have this single flash so and its on the camera. i also have no sound and i dont have the lcd light on. 3 days with the same batteries. i also put on a diffuser which i noticed is close to screen thats built in and slides out from the flash. the power on the flash can go really bright, more then i expected. the af-led also goes way longer and wider compared to my cameras built in version. i have been recommending it to my other entry level dslr friends.
December 8, 2017
As a pro photographer, I use a lot of flashes on location shoots. I was looking for a little more reasonably price unit that would do what I needed and not break the bank. Man, was I in for a surprise! These flash units offer all the capabilities of the high end flash units at about a third of the cost. What really surprised me is when I did a side-by-side test of the Yongnuo 568EX ll and the Canon 580 EX. The Youngnuo was 1/10th of a stop BRIGHTER! Full ETTL functionality and high speed sync capabilities, as well. I Liked it so much, I ordered another the next week and then a third 2 weeks after that! Very highly recommend these flashes! The quality of light and the build of the unit is remarkable. All at a very reasonable price. Buy one today and you will want another one very soon after.
By Happy Snapper
December 8, 2017
I purchased a few of the YN560-III earlier this year along with the YN-22c ETT-L and was pretty happy with them for manual flash applications, but wanted something that would replace/supplement my more expensive Canons and the E-TTL capacity as well as the ability to shoot in High shutter speed sync mode. I purchased 2 of the Y568EXII and use them with the transmitters mentioned above. I am very happy with them, although I feel that the build on the body of the 560's is better (more similar to the Canon's I have) I did have a little bit of a learning curve and found that these flashes work much better when I control the flash settings in my camera (Canon 6D) In the camera menu I can manage all sorts of things and I have had fun with being able to have different groups set to different power outputs. I have had no problems with any of my Yongnuo products other than the occoasional user error and the fact that I have had to make sure that I have extra batteries on hand if I am shooting all day
By Simone Severo
December 5, 2017
I have Yashica flash, Canon Flash, Neewer flash, Nikon flash and Yongnuo flash. The yongnuo YN-568EX II is the best of them all. Simple to use, guide number 58, powerfull and reliable, I prefer this 10 times over the Canon brand 580EX. I only use Manual mode as it is my preference, but have tested E-ttl with shutter speed of 1/2000 and it works fine with Ca non 6D, even though the max sync of 6D is 1/180. In high sync speed, it works. I use off-camera flash 100% and my photography time is much better used now that I can change the power of the flash from the Trigger yongnuo 622C-TX.
By Stevan Varnell
November 27, 2017
I admit this has an unusual way of locking the batteries in. The model I got last week has 8 plastic tabs to hold the batteries in. Yes I have to be a bit careful with inserting batteries it, but I am really curious how others are breaking so many tabs off so that it does not latch. Either it has been changed or people are not grasphing the (slightly unusual) mechanics of how the door locks. I am using mine with a 5d Mark III and in TTL mode its spot on. I usually shoot in manual though. I am not an not very knowledgeable on flashes but I find this unit impressive. Its very intuitive. Using the 105mm mode I can take photos with the subject 20 feet away in the dark. I am going to get a wireless trigger so I can put it somewhere besides on my hotshoe. I don't like the flat look of a frontal flash, even a ceiling bounced flash on people. However, I am thankful I don't realy need a flash very often (mainly outdoors) with my f2.8 lens. I was shooting a corporate event and I found the flash would have been disturbing the people I was taking pictures of. However, on birds and nature I am loving how I can add to daylight to get increased depth of field. I am wanting to be able to bounce/diffuse the light for a softer feel and usually I don't shoot with a full frontal light anyway.
By Robert E. Glasscock
November 20, 2017
Only just received it, but the YN-568EX II performed flawlessly at a lengthy party shoot. So far, I couldn't be more pleased with its quality and results - and especially the price! Given my Canon 580 EXII has only consistently FAILED at embarrassing moments (I thought it was me, until it was too late) and has been a complete waste of money, this Yongnuo is a gem. So far. My Canon 430 EXII has always performed reliably. Seems I'm hardly the only customer disgusted with Canon's 580 EXII, yet pleased with the 430 EXII. If this Yongnuo holds up (seems others have had battery door issues), I'll definitely be acquiring more of them! UPDATE: I'm more than sold! I've used the YN-568EX II repeatedly and consistently for two months. Indoors at parties, direct and bounce. Outdoors for team shots (25 corporate teams, daylight, over 4 hours; using this for fill. Completely natural looking.). On the road for 10 days. Flawless, reliable performance in every situation. Perfect integration with my Canon 7D on-board controls. No battery "issues" whatever: they last as long as on Canon Speedlights. No issues with the battery door. At this price? A no-brainer. I'll be getting another.
November 19, 2017
Arrived Friday, did a bridal session with it Saturday. Coupled with a pair of YN-622C transceivers, it went great. I don't know what Fremen is talking about. I shoot on a 6D and I used the meter in my camera to obtain good results on a sunset pic. I'll post some photos later. Fremen said if someone uses this flash at a wedding, you should be fired? Seriously? The flash works fine. Don't use TTL at a wedding I think is the better advice. If you know how to light a reception, this flash throws just as much light as the canon brands with only a marginal stop of light difference. Frankly, these lights are best for adding to ambient light anyway! Off camera, it was a joy to use on my outdoor portraits. Don't use product reviews to whine when you don't understand the tool, Fremen. Save your pennies and get some proper strobes if you're worried about weddings. In the mean time, stop debating. This flash is great for the price. $400 of savings? Yes please! I bought 3 with some yn622c and the new yn622 tx. Works awesome. 4 stars instead of 5, because I share some other concerns with the users about the battery door breaking. Definitely need to be careful when closing the battery door. Otherwise, construction is solid. Recycle was pretty fast at 2.8-9 seconds at full power, for me.
November 16, 2017
I ordered two of these and have not had them for very long yet, but I did hold off on the review long enough to make sure that they didn't die within the first few weeks. So far so good! I have tested these on a Canon 5D Mark II. The build quality is absolutely good enough for professional work, especially since they are less than half of what the Canon version costs. The bounce card and wide-angle diffuser are noticeably less sturdy, but I don't think they are so flimsy that it will be an issue. The tilt/swivel head doesn't lock like the Canon. I've actually come to like that about the Canon, but it's a very minor loss in my opinion. I would like another detent or two in the vertical direction- there one at 0 and one at 45 degrees, but nothing between. The power output is also slightly less than the Canon (I guess 1/3 stop or so), but nowhere near enough to complain- it's still excellent. The controls aren't quite as easy to use as the Canon in my opinion, but they aren't bad in any way. Adjustments just take a little longer. If you make adjustments through your camera's menu, there's obviously no difference between the two. High speed sync works wonderfully, just as it should.
November 15, 2017
The overall build quality is very good, on par with Canon 320EX. I didn't think the battery door was weak as it is supported by metal plate and pin, no worse than brand name models and much better than previous iteration of Yongnuo flashes. Flash output is consistent as well as the recycle time. It works well as a master flash and in slave mode. Also works well with Yungnuo's YN-622C-TX Bundle With YN-622C in multiple flash set up. Although this unit is wired for Canon cameras, when you configure it as a Nikon slave flash (marked as Sn on the LCD panel) it works flawlessly as a Nikon specific optical slave flash using Nikon CLS system, either using Nikon's SU-800 , SB-910, SB-900, SB-800 flashes. This feature makes this flash so much more versatile as I shoot both Nikon and Canon system. When I need multiple slave flashes for Canon, I can configure Yungnuo's Nikon version to act as Canon slave flash (marked Sc on the LCD panel). Only con for me is that the user interface is not very intuitive and took me awhile to get use to using all the features.
By Ferdie Bowman
November 15, 2017
Okay this is going to sound silly, but I love this flash. This was the first flash I ever bought in this class. Since I'm not a Pro I would never pay the price for the Canon OEM unit. This unit has way more features than I ever plan to use but it does the job well. I didn't expect it would be as robust as the Canon unit but I'm not a Pro and don't use it extensively. Much to my surprise it stopped working (would not fire) after only 2 months light use.. I contacted the Tomtop Seller and they were very responsive and provided me return instructions and offered me factory repair or 80% discount to purchase a new unit. I opted for factory repair. I returned the unit and all accessories in original packaging (I paid return shipping) . In approximately 2 1/2 weeks I had a new looking, fully working unit delivered to my door direct from China. Throughout the whole process the seller (MySunGlobal) kept me informed of the process through emails. According to the tracking information 5 days after the replacement unit shipped in China it arrived at my door. How do they do that?
By Charlie B
November 10, 2017
Good flash for the money. Powerful. Mine overexposes a little, needs 1/2 stop under to get right, no biggie really. No internal adjustment for that (sadly). Gets the job done. Data contacts can be finicky, keep them clean and you'l do ok. Occasionally just goes bonkers with either my 5Dii or 7D and the YN-622. Battery out reset when that happens, but its rare and only at startup after a long period of being off (weeks). Once up and running, it gets the job done. Did a long weekend at Daytona shooting Harley Davidson's.... ran like a champ! (EDIT: 7-18-15) Like so many other folks, my battery door broke. The tabs break off. There is a lot of battery pressure on the door, and the tabs are not up to the task of holding it in place. Ha! I came up with a fix. Very easy fix for folks even basically mechanically inclined. At LOWE'S you can buy a little bag of nylon thumbscrews in the hardware section. They're in the drawers for specialty fasteners. You can get them in 6-32 and 8-32 thread sizes. Get the 8-32. Also... if you don't already own an 8-32 tap, in the tools section you can get a nice little kit of 8-32 tap and the proper drill for it. Get those. It's easy to locate a spot in the bottom center part of the (broken) door to accept the drill and tap. Close the door, carefully drill a hole through the door and inner part of the battery compartment. Open the door. Thread the hole in the battery compartment with the tap. Get the next larger size drill and open up the hole in the door to give it some wiggle room (don't make it too big, just one size larger drill will do). You want the thumbscrew to be able to slide through the door's hole and thread into the hole in the battery compartment. You'll find that this works PERFECTLY to solve the broken door issue, as the thumbscrew is a very secure fasterner - even if it looks a bit Frankenstein'ish. Other than that, no issues after two years (almost). I had the YN565 and the display is not nearly as nice. The 568exII is very well thought out.... works great. I'll be getting two more, maybe three more, for an upcoming small product shoot. Coupled with the YN-622, they make a really good small product light set.
November 8, 2017
I am an intermediate/aspiring photographer and shoot manual, but I was never happy with my low-light indoor photos. A friend asked me to shoot her wedding and I knew that I needed something to take my photos to the next level and to ensure that the lighting was right for indoor wedding shots. This flash did exactly that! I love the ettl - just attach the flash and start shooting. Hold the shutter button down halfway and zoom a little for the flash to pick up on what you are photographing. You can play around with the strength of the flash (ex: -2/3) depending on how strong you need the flash to be. The pictures turned out great! It was so nice to finally have no noise with my indoor photos. I even used the flash during the outdoor ceremony because they stood in a gazebo, which made them very dark while the outside lighting was light. I was able to shoot at the back of the audience and have their faces well-lit. Recycle time was not noticeable, I felt as though I could shoot continuously. I set up the tripod and got a group shot of everyone at the wedding at the end of the night when it was completely dark out and the photo came out great. My friend LOVES the photos and I couldn't have done it without the flash. I highly recommend this flash, especially at the price! Note that it is a slave only. Also, I bought the eneloop 4 pack rechargeable batteries and shot for about 6 hours before they went dead. I recommend buying the 8 pack if you are shooting for more than 4-6 hours.
By Crystal Johnson
November 7, 2017
I love this flash! The screen is easy to read and clear, however, it did take me a bit to read through the manual as the English side could use some work. It can be a pretty powerful flash and the HSS works wonderfully. I've also tried it off camera and have only fired it maybe 150 times since I've bought it about a week ago. I can say that it hasn't misfired or malfunctioned yet, so this looks to be a promising buy. I will update in a few months to let you know if I still love it or not, UPDATE 10/21/2013 Since buying this flash, I've photographed over a dozen weddings in excess of over 10 hours each. During the weddings, I use the Canon 580exII that the main photographer loans out to me. I can honestly say that it's on par with Canon as far as consistency and quality of light. I've actually switched the Canon out for the Yongnuo when it was acting glitchy. There is a difference in build quality, but it's nothing that I can't handle, as I'm VERY careful with my gear. One thing I have noticed is that the side battery pack door is starting to stick out a little, and it actually popped open during a reception. Others have had the same issue as well, but I will fix this with some gaffer's tape, so no sweat. I still love this flash. I have version II on order so I can start a 3 light set up. Overall, with the exception of the battery door, no problems. This is a flash on par with the big brands, and it will literally save you hundreds of dollars.
By Brad M.
November 7, 2017
These things are awesome! I own two (in addition to a Canon 580EX II) and wish I had known about these before I spent big bucks on the Canon. I actually prefer the interface on these over the Canon. The four-arrow keypad is much quicker to use than the dial on the Canon. I've used these on camera back, as smart optical wireless slaves, dumb optical slaves, and wirelessly with the YN-622C transceivers in both normal and HSS modes and everything works just as expected. If you're looking to build a relatively cheap bank of speedlights for doing full-sun HSS work, this is the way to go. I've become a Yongnuo evangelist... there's absolutely no reason to spend over twice as much on the Canon equivalent when these work just as well. I'm not so nervous about having these swaying around on a 9-ft light stand precariously perched on a boulder.
November 7, 2017
J'ai fais l'acquisition de 4 Flashs Yongnuo Yn560 IV (flashs Manuels) ainsi que le contrôleur de la même marque,(YN 560-TX) pour une utilisation en stobisme. Çà a été un peu laborieux de les faire se reconnaître entre eux sans un manuel en français mais avec les tutoriaux on fini par trouver. Heureusement çà reste mémorisé quand on remet l'ensemble en marche. Ensuite peu importe si la technologie des flashs est simple ou compliquée vu que tout est piloté facilement depuis le contrôleur. J'aime faire de la photo sans me compliquer la vie avec la technique ! Je possède déjà le système de flash Nikon qui fonctionne par infrarouge et donc la portée est limitée. J'essaye le système yongnuo qui lui fonctionne par radio, la portée est de 100m en extérieur et de 25m en intérieur... à tester, mais bon je n'aurais jamais besoin d'autant ! Reste à tester tout çà en situation studio.
By Carlos Rey
November 6, 2017
This is a very early on assessment of the YN-568EX II. I received my unit last night, and put it through its paces.... + I can say that issue with the battery door seem to have been addressed with my unit. The door latches seem as "big" as the ones on my YN-560EX II which I have had about a year with no issues. + The Issue reported on many sites regarding the loss of output when tilting the head around while in Evaluative mode, is not present on my unit. It works very well in both Average and Evaluative with head-on or bonce flash. - My only gripe is the flap that covers the 2.5mm jack, pops open, but this is way toooo minor a deal to have it replaced. Over all, I am very happy with my flash. I tested it while walking in and out of differently lit places an it behaved like a champ! I highly recommend Yongnuo flashes. There is no better value in speedlites out there!
Hot Event Jeszcze
Najlepsi sprzedawcy Jeszcze
Twoje pytanie zostało przesłane pomyślnie