Ulubione

Najedź, aby powiększyć

YONGNUO YN622C II 2.4G Wireless E-TTL wyzwalacz Receiver Transmitter Transceiver dla Canon EOS 5D Mark II 7D 70D 60D 50D 40D 450D

YONGNUO YN622C II 2.4G Wireless E-TTL wyzwalacz Receiver Transmitter Transceiver dla Canon EOS 5D Mark II 7D 70D 60D 50D 40D 450D

Cena dotyczy tylko aplikacji:

Masz już aplikację TOMTOP

Skanuj kod produktu, aby kupić bezpośrednio!

Uwaga: Proszę zaktualizować aplikację TOMTOP do najnowszej wersji.

Nie masz APP TOMTOP

Pobierz bezpłatnie i skorzystaj z dodatkowych ofert!

Statek z:
  • Chiny Magazyn
  • Niemcy Magazyn
Wybierz magazyn
Wysyłka:
Zazwyczaj będzie dostarczany w dni roboczych godzin
Wysyłka:
Żądanie nie powiodło się! Proszę spróbuj ponownie.
Niestety, wydaje się, że nie istnieją dostępne metody wysyłki dla danej lokalizacji.Proszę Skontaktuj się z nami w celu uzyskania pomocy.

Załadunek...

Dostawa do

United States
Zdjęcie w: china
QTY:

Każdy użytkownik może kupić tylko 5 Kawałek

Special discount has ended

Please note each user for only 1 item(s)

Przed Sprzedaż Dodaj do koszyka Obecnie brak na stanie

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Ochrona kupującego

  • Pełen zwrot kosztówJeśli nie otrzymasz zamówienia
  • Pełny lub częściowy zwrot pieniędzy , Jeśli przedmiot nie jest zgodny z opisem Ucz się więcej >
Nowa wersja uaktualnienia, które YN622C II można ustawić na tryb "622" lub "560-RX" komunikacji poprzez przełącznik zasilania, obsługuje odbieranie sygnału wyzwalającego YN-560TX/RF605(603 mode)/RF603(II) series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade.

Funkcje:
Obsługuje tryb komunikacji "622" i "560-RX", może odbierać sygnału wyzwalającego YN-560TX/RF605(603 mode)/RF603(II) series products.
Zgodne E-TTL II/Manual/Multi tryby lampy błyskowej i wsparcie E-TTL / instrukcja / Multi flash tryb mix za pomocą (tryb kontroli mix).
Można kontrolować zdalny flash parametrów przy użyciu aparatu kontroli błysku ekran menu (w trybie zdalnego sterowania).
Zgodne migawki Synchronizacja: 1 kurtyna, 2 kurtyny, synchronizacja o wysokiej prędkości (HSS/FP), max 1/8000s synchronizacji prędkości.
Wsparcie FEC/FEB/FEL, również wsparcie modelowania flash.
Wsparcie E-TTL Grupa stosunek (wszystkie / a: b / C a: b).
Grupa wsparcia Podręcznik/Multi (wszystkie / a: b / A:B:C).! Obsługa flash powiększanie (auto, ręczny).
Pomoc techniczna AF pomóc Emiter wiązki (AF Lampa).
Obsługują wyzwalanie błysków stroboskopu portów PC i wsparcia 1, 2 kurtyny/HSS(Super Sync).
Obsługa LCD live, zobacz Wyzwalanie.
Wsparcie szybkiego ciągłego fotografowania wyzwalacza.
Ustawienia zapisane automatycznie.
Pasuje do wszystkich YongNuo / serii Canon EXII miga.
Pojedynczy kontakt kamery z obsługą & flash wyzwalania. (prędkość maksymalna synchronizacji jest 1/250s!) Obsługa USB aktualizacja oprogramowania sprzętowego.
Quick lock design, łatwe w obsłudze.

Kompatybilne z:
Dla Canon EOS 1DX, 5D Mark II, 5 D Mark III, 1Ds Mark III, 1D Mark IV, 1 D Mark III, 6 D, 7D, 7DII, 60D, 70D, 50D, 40D, 450D, 500D series, serii 600D, serii 700D, 1000D serii (EOS DSLR aparat z menu kontroli zewnętrznego błysku)
Canon EOS 5D, 10D, 20D, 30D, 300D, 350D, 400D, 1D, 1 D Mark II. (EOS DSLR aparat bez zewnętrznego sterowania błyskiem menu)

Zgodne E-TTL flash listy (wsparcie bezprzewodowy pilot zdalnego sterowania za pośrednictwem menu aparatu):
Canon 600EX(RT), 580EXII, 430EXII, 320EXII, 270EX(II) i dla YN-568EX(II), YN565C(II), YN468C(II), YN-467C(II), Yongnuo YN600EX-RT, YN - 465C

Uwaga: 430EX, 550EX i 580EX lub innych części programu flash nie jest obsługiwanych zdalnego sterowania za pośrednictwem menu aparatu, należy ręcznie ustawić tryby lampy błyskowej i parametry.


Dane techniczne:
Typ systemu: cyfrowy FSK 2,4 GHz bezprzewodowe urządzenie nadawczo-odbiorcze Odległości: 100m! Kanał: 7! Grupa: 3 groups(622), 6 groups(560-RX)! Tryb lampy błyskowej: E-TTL (II) / ręczna lampa błyskowa/multi flash! Tryb synchronizacji: kurtyny 1 / 2 kurtyny/Hi-speed sync! Prędkość max synchronizacji: aż do 1/8000s
Wejście: Gorącej stopki (TTL, głównego kontaktu)
Wyjściowy: Port gorąca stopka/PC! Baterii: 2 * baterii AA (nie dołączone)-za jeden wyzwalacz! Czas czuwania: 60 godzin
Rozmiar elementu: 9 * 5.2 * 4 cm / 3.5 * 2.0 * 1.6 w
Waga towaru: 94g/3,3 uncji
Wielkość opakowania: 14.8 * 12 * 5,5 cm / 5.8 * 4.7 * 2.2 w
Waga w opakowaniu: 273g/9,7 uncji


Uwaga:
Bateria nie jest wliczone w cenę.


Pakiet listy:
2 * urządzenie nadawczo-odbiorcze
1 * Instrukcja obsługi (angielski & chiński)

Note:
The battery is not included.

Package List:
2 * Transceiver
1 * User Manual(English & Chinese)

Pytania i odpowiedzi klientów

Sortować:
1
Q

Do i simply need this pair to fire a single 430exii flash wirelessly from my 5dmk2? or do i need a transmitter also?

A
  • Yes is the easy answer. They are transceivers.

    By L. E. Dockery on December 9, 2017

(3)
0
Q

The original yn622c is not fully compatable with the canon 1dx ii. is the yn622c ii compatable with the 1dx ii?

A
  • I don't know

    By Roger Mathis on July 11, 2018

(3)
0
Q

Can i use only one to trigger a powerextra df-801 flash for canon instead of a pair?

A
  • yes

    By Palomino on May 11, 2018

(1)
0
Q

Want to do hss with canon 5d iii. will this work?

A
  • Thanks for your time David - I'm buying with YN685 GN60 2.4G System ETTL so should be good to go. Ever see me out, I owe you a beer.

    By KC on May 6, 2018

(4)
0
Q

Is this recognized by Canon 5D Mkiii?

A
  • Yes, it works with that camera.

    By Rodrigo on May 7, 2018

(4)
0
Q

Will these trigger studio lights ?

A
  • Hi Bruce, our YN622C/YN622C II can trigger the studio lights, and you also need to buy the PC cable LS-PC/635.

    By Erle on April 7, 2018

0
Q

Will it work on sony a7 ii and sony hvl 43m flash with mi shoe?

A
  • Hello Sorry not sure on sony ?

    By Collin on March 25, 2018

(1)
0
Q

im going to purchase the 600ex flash. will this work with my canon 7d mark ll and this? also is this an upgrade from 622c

A
  • This will work with the Canon 7d mk II, but it will not trigger other flashes that you have been using the 622c for, or it doesn't on my.

    By Roger Mathis on March 23, 2018

(3)
0
Q

Can i buy these to expand my existing system that has a yn622-tx transmitter on my 6d controlling an oc 430exii on a yn622 receiver?

A
  • Yes Thank you

    By Nazario on March 10, 2018

0
Q

Are these compatible with LumoPro LP 180

A
  • If it is compatible with cannon camera then it should work. I have not direct experience to tell you for sure.

    By Roger Mathis on March 6, 2018

Dyskusje

Opublikuj nowy temat

Pamiętaj, że Forum TOMTOP to społeczność pomagająca wymieniać się pomysłami i pomagać w poszukiwaniu, podczas których entuzjastyczni technicy będą uczestniczyć w dyskusji, tymczasem obsługa klienta TOMTOP (z ikoną obsługi klienta Tomtop) będzie odpowiadać na czas, z tą samą funkcją, co kontakt na http : //www.tomtop.com/contacts

otwórz to forum na całej stronie
Opinie klientów

Średnia ocena:

4.9

oparte na 38 Opinie klientów

  • 5 gwiazdy
    95%
  • 4 gwiazdy
    5%
  • 3 gwiazdy
  • 2 gwiazdy
  • 1 gwiazdy

Podziel się swoją opinią z innymi klientami i uzyskać Tomtop punkty, pierwsze 5 opinii dostać DOUBLE Tomtop Punkty!

Napisz Recenzję
  • By Gadget Lover

    October 11, 2017

    Found these after I got into off camera flash and I am very happy with the results and the price. When I first dipped my toe into off camera flash, and quite frankly not knowing what I was doing at all, I was stupid enough to go out and buy Canon speedlites for $250, thinking that was basically the only option. When I found the Yongnuo products, I was a bit skeptical, but I saw some reviews on YouTube and figured I'd give them a shot. For the price, probably even aside from the price, these are great products and I am amazed how it cheaply changed my photography. Of course, I have had flashes not fire, but I don't think I could ever trace the reason to these triggers. Rather, I think the non-fires were always due to the light not recycling in time, or batteries, or some other issue. Could you buy Canon (or Nikon), and maybe have 100% confidence that your flashes will fire? Maybe. But I can buy 5 of these guys for the price of a big name. So, I can get more many more lights and triggers and have many more options buying Yongnuo. My only problem that I had with this, and mainly due to my not reading a slightly confusing manual, is the power switch. I didn't realize that there are 2 options for the power switch: 560-RX and 622. In probably my second use, I had only slide the power switch one notch to the 560-RX setting and my flash wouldn't fire. I was stumped for quite a while trying to figure out the problem then finally (accidentally) found the solution by sliding the power switch one more notch to the 622 setting. The manual is confusing, but the bottom line is that these triggers communicate differently based on what transmitter you're using (I use the YONGNUO YN-622C-TX E-TTL trigger, and the proper setting on this receiver's power switch is the 622 setting). So, other than the above (not really a product issue), this is a simple design, easy to set your channel and group with just a push of a button. I have only good feedback and would recommend this product.

    Is this helpful? (0) (0)

  • By Adam R.

    September 16, 2017

    Paired with the 622c-tx transmitter, these work great. (Working with an 80D and 580EX II.) When used as a master, the camera might as well have the Canon brand unit installed. All menu options light up and work as expected. On the slave side, they seem to have no issues communicating with a 580ex II (despite the weatherized boot) and easily allow remote control of output, zoom, hss, etc. I tested using one of these with the 622c-tx to trigger the shutter, and while it works, there seemed to he a substantial delay. (Upwards of a couple seconds.) Not sure if that is due to an issue in the 622cII, an issue in the 622c-tx on the camera, or the decision to use the hotshoe triggering vs. direct shutter release cable. In the current state though, it would be great for stills but the delay would easily cause missed shots for anything involving action/movement. Since I wanted these just for flash firing, the shutter option was just a nice bonus, so definitely not an issue. (And not doable with JUST these units alone as the shutter option is in the 622c-tx unit.) All in all, a great setup at a fraction of the pocketwizard tax.

    Is this helpful? (0) (0)

  • By Jamison Lemay

    June 13, 2017

    I have 4 of the original YN622C transmitters, and they have served me well, but now I'm seriously considering replacing them all with YN622C II's. They do everything that the 622C's do, with a few improvements: They now have a Quick Lock hotshoe foot, which is the main reason I'm considering buying more, it may seem like a small thing, but now with Quick Locks on my speedlights *and* triggers, set up and tear down takes seconds. USB port for firmware upgrades. Hopefully this isn't needed too often, but as was seen with the YN622C-TX, sometimes updates are needed to fix issues with models of certain cameras. To date, I haven't had to use this feature, as the transmitters have been flawless. Compatibility with the Yongnuo 560 transmitters. Not really applicable to me since all my triggers are 622C models, but it could be useful for others. I use mine with a YN622C-TX, but they work great with the in camera controls on my 6D and 70D and a 622C\622C II, I just use the 622C-TX for speed of adjustments when using multiple lights. The battery life is just as good as the original 622C, range is good, and so far they have proven reliable. They are also very compact, so they pack well; I carry them and two 430EX II's everywhere with me now. Id highly recommend buying the 622C II!

    Is this helpful? (0) (0)

  • By Bernard

    May 2, 2017

    I've been doing photography for a few years now and always wanted to experiment with off-camera lighting. At first, I was looking into the Pocket Wizard options, but for what I wanted to do, the option to combine FlexTT5 and MiniTT1's quickly got expensive. I saw these online and did some research, everyone seemed to be very pleased with them, so I decided, for such a great the price "why not give them a shot?"... Well let me tell you, I'm extremely pleased with my decision!! These worked RIGHT OUT OF THE BOX, without having to go crazy with settings etc. I used them on my Canon 5D MKII along with my 430EX II's and 600EX RT and was able to remotely fire my flashes just on the default channel/group. I'm looking forward to playing around more with these at weddings and for portrait work. I'm hoping in the future they reconsider the design and make them a tad bit smaller and more ergonomic, but that's an aesthetic preference as they work just fine as-is currently. These are HIGHLY recommended!

    Is this helpful? (0) (0)

  • By Muhammad

    March 30, 2017

     Im going to jump right into it: PROS: Affordable, really easy to use, reliable signal from TX to receiver CONS: Not the best build quality, the battery cover removes pretty easily so you might lose it Final review: This flash trigger is amazing! It can do everything other more expensive flash triggers can do. I specifically got these to achieve high speed syncing which is really important for action/high speed photography and also using your camera to sync high shutter speeds during the day time with flashes. Right out the box and turning it on its not hard to understand how to use them if you've used external flashes, it uses standard terminology used when dealing with flash triggers. The menu is easy to read and understand. Also right out of the box they sync with the receivers too so you can literally put batteries in them and start using them. If your looking for reliable flash triggers that will work all the time and that you want flash triggers with high speed syncing and TTL functionality then I definitely recommend this system.

    Is this helpful? (0) (0)

  • By S***O

    March 17, 2017

    I was a bit sceptical to try these but so many reviews state they are great for a fraction of the cost of the "higher end" units so I decided to give it a test. So far I am completely satisfied with the performance. They are very easy to configure and the range ETTL function are fantastic. I have not had any operational errors. The only thing I wish was a bit different is the button placement on the sides of the unit. It is easy to accidentally change a setting. Overall I am very satisfied and woul not hesitate to recommend this product!

    Is this helpful? (0) (0)

  • By Corey Reese

    March 13, 2017

    My Main reason for buying this set was to activate HHS off camera and to have manual control of the flash from my camera . I have a 5d mark 2 & 3 with a 580 exii. Taking a photo the unit will flash with no problem which lets me know the units are on the same channel etc but at first I couldn't control the settings wireless. Using the 580 ex ii on top of either camera allows full control of the flash with no problem, HHS, Everything working just fine. I went to my local camera store and they had a 430 ex with the older type twist down to lock mount and the pass through worked, as I pushed the camera shutter half way I saw the aperture flash on the lcd of the flash which let me know the connection was working. So either contacts are not close enough or something else is going on, I take the rubber off of the bottom of my 580 ex ii and now it works and I'm able to control the unit wireless.

    Is this helpful? (0) (0)

  • By DSchna

    March 1, 2017

    After no longer working as a studio photographer with studio lights I started with Cactus manual triggers which I rewired and made them work 99% of the time even out to 300 feet. I tried two different sets of the Neewer 622c version of these TTL triggers but they were inconsistent at best. These Yongbuo triggers work great. I ran the Yongnuo's through many tests and didn't see any troubles including 50 feet and through multiple rooms. TTL exposure will vary very slightly when a photo is taken without a flash, so the very very slight variations with flash were acceptable. One reason for inconsistent exposure with these triggers can result from not giving the camera time to compute the exposure. Its just takes a slight pause of depressing the shutter button waiting a second to fully depress for the portrait. Since I previously worked with manual triggers it took me a little bit also to get used to the pause. To be honest I will also set these manually most of the time. So far I am very pleased with these and have ordered another set since I traditionally do 4 flash setups. I am using the 622c TX trigger which is great also. I use these with a Canon 70d a 580 EXII flash, Neewer 985C Flash, 2 SB-24 nikon flashes(in manual mode). When the lighting is constantly changing these give a lot of flexibility and I no longer have to use the ttl cable. I am also starting to consider adding more flashes and triggers to make more complex lighting setups. I have not had a problem with the locking mechanism being too loose. Honestly the mechanism makes it easier for those who have arthritis in their hands. The USB port also gives the potential for updates. That might be more of a gimmick though since these work well. I have not used these outside of the 622c mode. For me these triggers really work well.

    Is this helpful? (0) (0)

  • By Shared Acres

    December 8, 2017

    affordable and a great little tool

    Is this helpful? (0) (0)

  • By treeelee

    November 15, 2017

    they get the job done , not as good as my Pocket wizards while shooting High Speed Sync , I noticed a difference of about 1 or 2 f-stops of light I don't get from this set vs my pocket wizards , but they are consistent no issues from them and they are affordable

    Is this helpful? (0) (0)

  • By B***O

    November 3, 2017

    Works great with my Canon T5 and Altura flashes. I love the latch mechanism-- that's why I bought the II version instead of the original. But, I think if would be better if Yonguno would sell this as a single since the original would probably be easier to deal with on flash stands. But on the camera, the II version is ideal-- easy on/off and darned secure. Was secure with my flash too, but I am careful with my gear, so I don't know how rugged it would be otherwise.

    Is this helpful? (0) (0)

  • By Dan in SC

    June 23, 2017

    I've owned the Nikon version of these wireless triggers and they performed beautifully, so I expected the Canon version to work just as well. I was not disappointed. I do use these as receivers only in conjunction with the YN-622C-TX E-TTL transmitter because it has a clean and easy to use interface. This makes for a winning combination and the price is unbeatable. Very reliable performance.

    Is this helpful? (0) (0)

  • By Christopher C.

    June 22, 2017

    I got bit by cheaper Yongnuo remotes and I almost passed on these. I'm glad I didn't. They talk to my canon flashes perfectly and give lots of flexibility and reliability that I thought I wouldn't get at this price.

    Is this helpful? (0) (0)

  • By Dennis Swena

    June 13, 2017

    They are well made and have been very reliable so far. They support High Speed Sync and I love the quick lock hot shoe attachment feature. I have two of the YN622C's and this is a very worthy upgrade. No reason to buy the YN622C go straight for the YN622C II's

    Is this helpful? (0) (0)

  • By Barb

    March 23, 2017

    Great product, but a little difficult to operate at first. The problem was more with the camera and having it on the correct setting, but had to Google the information.

    Is this helpful? (0) (0)

  • By Toma G

    March 22, 2017

    An excellent product.

    Is this helpful? (0) (0)

  • By peterlaw1

    March 20, 2017

    This is easy to use equipment. I give it 5 stars because I use it with the 622-TX transmitter. Without the transmitter you need to use your camera's menus and it wouldn't be as easy to operate. In fact, without the transmitter I give this transceiver 4 stars. So, if your really want ease of operation, I suggest buying this with the 622-TX.

    Is this helpful? (0) (0)

  • By felix mizioznikov

    March 18, 2017

    Works great with canon 5d4 and 600exii rt. Only for Ettl use. No manual... unless I can't figure it out. No battery compartment issues as others described. I use rechargeable eneloops.

    Is this helpful? (0) (0)

  • By Dale McDonald

    March 14, 2017

    These transceivers are great for the price. I have mixed them in with old and new flash equipment and never had a problem. For example, I use them with a 5D MIII, Yongnuo YN565EX and YN600EX-RTII flash. Never had any trouble controlling my flash units.

    Is this helpful? (0) (0)

  • By Oscar A.

    March 9, 2017

    good ones. I like!

    Is this helpful? (0) (0)

Najlepsi sprzedawcy Jeszcze

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

Ostatnio oglądane

NASZE STRONY UCHWYTU PLIKÓW COOKIE

TOMTOP wykorzystuje pliki cookie, aby zapewnić najlepszą jakość zakupów. Jeśli będziesz nadal korzystać z naszych usług lub założyć nowe konto, założymy, że akceptujesz naszą Politykę prywatności.

Powiedz nam, który produkt chcesz kupować grupowo

Click the refresh verification code