This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and fine effect.
Perfect for cooling your outdoor living areas.
Easy to install and use.
Stainless steel spray sheet is processed by advanced forging technology, strong durability, the working life is about 2.5 times compared with similar products.
The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better.
Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.
Material: PE Line
Faucet connector: 1/2"
Length of line: 6m / 19.7ft
Weight: 250g / 8.8ounce
Package size: 300 * 300 * 50mm / 11.8 * 11.8 * 2.0in
Package weight: 280g / 9.9ounce
1. It is recommended that the misting system be installed at the height of 2.5m-3.0m.
2. Connect the adapter to the water tap.
3. Turn on the water tap and wash the system for 1 minute and remove the impurities.
4. Screw the spray nozzle onto the tee parts, except for the end one.
5. Turn on the water tap and clean system for 2 minutes to make sure the system is completely cleaned.
6. Close the water tap and install the last nozzle to the joint and use the end cap.
7. Fix the misting hose by a cable belt saddle clamp.
8. Turn on the water tap until the sprayer works and enjoy the cooling misting system.
9. When no need to use the misting system for long time, close the nozzle and keep it dry and clean.
1 * Tube 6 meters (3 meters ahead, 3 meters behind the nozzle)
1 * Faucet Connector
6 * Clips
6 * Nozzles (1 spare)
1 * Plug