*1PCS RF garage door controller receiver switch module + 1PCS remote controller. With small size, take up very little space, work in a multitude of different systems.
*Stable and reliable performance, high receive sensitivity, low power consumption. Very convenient and safe to use, simple wiring diagram connection way. Easy operation.
*Support remote control up to 20 pieces. The working mode can be changed by yourself: you can switch to momentary, toggle, latching three modes as you need.
*Widely used in our daily life. It can connect to the access control system, garage door, light, electric curtain, household appliances, electrically operated doors, motor control, water pump, lifting equipment, security system, etc.
*Learning pair code: it can work with any remote control with the same frequency, so you needn't worry about losing remote control any more. (If the remote control is lost, buy one and pair with the PCB board is OK.)
Working voltage: DC12-24V
Power consumption: <10mA
Output Current: <10A
Remote control storage: up to 20 PCS
Working mode: Momentary, Toggle, Latching
Wiring type: fixed terminal
Output Terminal: NO , NC , COM
Supporting Remote Control Type: learning code (1527 chip) ; fixed code
Item Size: Approx. 8.2 * 6.5 * 2.5cm (L*W*H)
Item Weight: Approx. 70g / 2.5oz
Remote Control Specifications:
Voltage: DC 6V
Working Current: 11mA
Range: 50-100 meters (Open Space)
Pair Code Mode: Intelligent Learning Code EV1527
Remote Control Battery: 2*CR2016 3V (included
Bottom: ON/ OFF
Remote Controller Size: Approx. 6.2 * 3.5 * 1.3cm (L*W*H)
Leather Buckle Length: 98mm
Remote Controller Weight: Approx. 21g
Package Size: Approx. 14 * 9 * 2.5cm / 5.5 * 3.5 * 1in
Package Weight: Approx. 98g / 3.5oz
1* WiFi Smart Switch Module
1* 4 Pin Connection Cable
1* Remote Controller