• Easy to install, just install the gantry, ribbon cable, and filament holder, and the installation can be completed within 2 minutes.
• Manual leveling, but BLTouch is also easy to install on the Artillery Sidewinder X1 3D Printer for automatic leveling.
• Excellent cable design, the cable design of Artillery Sidewinder X1 3D Printer is ribbon-shaped, which makes the appearance more neat and elegant.
• X, Y, and Z axes are very stable. The bed rail and X-axis of the Artillery Sidewinder X1 are constructed by using large 20 x 60 mm aluminum extrusions.
• Z-axis is composed of 40×20mm aluminum extrusion, a solid frame, and the Sidewinder X1 has a dual Z-axis synchronization system to ensure that the Z-axis will not swing due to printing large-volume models.
• Drive Titan Aero style extruder directly, this is the unique innovation of Artillery Sidewinder X1, so the heating is also quite fast, reaching 200°C within one minute, and can rise up to 270°C.
• Extruder of Artillery Sidewinder X1 3D Printer is equipped with two fans. One is to cool the extruder, and the other is to cool the printed matter. A good cooling effect makes the printed model more perfect.
• AC heating bed uses lattice glass, which has good viscosity, durability, and flatness. It can be heated quickly and increase temperature. It takes about 50 seconds to heat to 60°C, and it only takes less than 2:30 minutes to reach 100°C.
• Material interruption sensor will send out a reminder when the material is used up, continue printing after the material is added.
• After the power is off, the printing function can be automatically restored when power is back on, printing result will not be affected.
• Artillery Sidewinder X1 3D Printer supports micro SD and USB. Printing process is very quiet, and the noise level is maintained at around 45 dB.
• Artillery Sidewinder X1 3D Printer has a large printing volume of 300 x 300 x 400 mm. 3.5-inch color touch control screen, simple and convenient operation.
Model: Sidewinder X1
Layer Resolution: 0.1mm
Frame: Aluminum Extrusion
SYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament: PLA, ABS, TPU, TPE, Flexible Material
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Maximum Print Speed:150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume: 300 * 300 * 400mm / 11.81 * 11.81 * 15.75in
Extruder Type: Titan Extruder (direct drive)
Maximum Build Plate Temperature: 130℃
Power Requirement: 110V/220V, 600W max (with heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type: Volcano
USB Disk Capacity: 1GB
550 * 405 * 640mm / 21.65 * 15.94 * 25.2in
550 * 405 * 870mm / 21.65 * 15.94 * 34.25in (with spool holder)
Machine Weight: 14000g / 493.84oz
Package Size: 78 * 54 * 25cm / 30.71 * 21.26 * 9.84in
Package Weight: 16500g / 582.02oz
1 * Artillery Sidewinder X1 3D Printer DIY Kit