ACMER P1 20W Laser Engraver with Automatic Air-assist System 10000mm/min High Speed

Features:
🔝 22W Super power: one-time cutting 10mm plywood, can cut 30mm acrylic board many times, cutting 0.1mm stainless steel plate. ACMER P1 series is equipped with ESP32 dual processor chip. Built-in 256-bit color scale to achieve finer engraving effect and higher contrast effect.
🔝 Larger carving area and more carving materials: 400*390mm large carving area, can be carved on wood, bamboo, paper, acrylic, leather, PCB board, aluminum oxide, metal, ceramics, etc.; can cut wood, acrylic, bamboo, leather, paper, etc., can DIY hundreds of materials.
🔝 Automatic air-assist system: According to the content of the customer's document, the air-assist system can be turned on and off automatically, which can significantly improve the cutting speed and cutting accuracy while improving the quality of cutting and avoiding yellowing and burning of the material.
🔝 Optimize the cable alignment: X, Y axis alignment all use tank chain form, so that the harness is neat and tidy, no drop interference during operation; at the same time also avoid the wire outside the fall into the work area and lead to safety risks.
🔝 Multiple Protection: Design with anti-tilt protection function: the machine automatically stops working when tilted more than 15 °; And emergency stop switch for any sudden situations; And each P1 is equipped with a safety key, you need to insert the key to open the switch to work, to prevent small children or other people using your machine to cause accidental injury.
🔝 Wide compatibility: This machine is compatible with various mature carving software and can be controlled by APP, such as LaserGRBL (free), LightBurn (paid), LaserGRBL supports Windows XP/7/8/10/11, LightBurn supports Mac OS and windows, carving file formats support NC, BMP and JPG, PNG, DXF, etc.
🔝 Sturdy structure and easy installation: ACMER P1 laser engraving machine adopts all-metal structure frame, which makes the machine more stable and durable and improves the engraving accuracy. The whole engraving machine adopts modular design, 90% pre-assembly delivery, only 4 simple steps to install successfully, only 10-15 minutes to complete the installation of the whole equipment.

Specification:
Model: P1 20W
Laser power: 22000mw
Engraving size: 400*390mm
Spot size: 0.08*0.1mm
Engraving speed: 10000mm/min
Electrical requirements: 24V 4A DC/24V 3A DC
Motherboard: ESP 32-bit
Engraving method: USB / APP / online / TF
Software support system: Mac, Windows, Lunix
Laser wavelength: 445±5nm
Engraving materials: wood, plastic, paper, leather, bamboo, stainless steel, chevron, acrylic, glass, etc.
Engraving method: image engraving/text engraving scanning engraving/convex engraving
File formats: SVG, NC, BMP, JPG, PNG, GCODE, etc.
Support software: LaserGRBL, Lightburn
Safety protection: emergency stop switch, anti-tilt device, power safety lock
Package Size: 66x33x32cm/25.9x12.9x12.5in
Package Weight: 9kg/19.8oz

Packing List:
1 x P1 20W Laser Engraver Kit