6in1 1S LiPo LiHV Parallel Charger Board XT60 Input for Blade Inductrix E010 Drone Micro JST 1.25 JST-PH 2.0 Battery

This charger makes field charging, such as your model plane, drone, or quadcopter very convenient! Just take any 3s or 4s lipo with an XT60 connector and plug it into this charger and charge dozens of 1s packs. You could also use a walladapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger port to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn solid until the battery is fully charged. Once charged, the LED will turn flashing and you can remove your 1s battery and fly!

Features:
Charge 1S Lipo batteries (4.2V) and LiHV Lipo batteries (4.35V) at once in the same board by a selectable switch.
Input Voltage: 6-26V, XT60 2S-4S LiPo or DC 12V/3A adapter for field charging and home charging.
200/600mA selectable current per charge port, support charge up to 6 pcs batteries with Micro JST 1.25 or JST PH2.0 power plug at once.
Individual charging per ports, not parallel.
Turns itself off when supply battery reaches safe low-voltage.
LED lights indicate when each battery is done charging.
Perfect for Blade Inductrix and Tiny Whoop battery charging.

Specifications:
Input voltage: 6-26V 
Input port: Two methods, DC 12V/3A Adapter, XT60 LiPo Battery or Adapter
Output port: USB 5V/2.4A
Charge port output: Selectable 200mA and 600mA, Max charge power: 2.5W
4.20V cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35V cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter with XT60 Plug
Weight: About 40g
Dimensions: About 83 * 53 * 15mm

Digital Display:
INP/xxV: Input voltage
CH1.....CH6/xxV: Inserted battery voltage
USB/xxV: USB output voltage

LED Indicators:
Green flashing slowly: 4.20V selected
Green flashing rapidly: 4.35V selected
Green solid: Battery charging
Green turn flashing from solid: Full charged

Note: 
Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Micro JST 1.25 plug and another on the same port with the PH 2.0 plug.

Package Information:
Package size: 9.5 * 8 * 2cm / 3.74 * 3.15 * 0.78in
Package weight: 42g / 1.47oz
Poly bag package

Package List:
1 * 6in1 1S Charging Board