Hobbywing XRotor Micro BLHeli 20A 2-4S ESC Brushless Electronic Speed Controller for QAV210 250 280 RC Multi-rotor Drone
F396 chip for great performance, 48MHz.
Small size combined with light weight for easy installation.
Applications for: FPVs with 130-280mm diagonal wheelbase.
Active-freewheeling, technology improves driving efficiency, flight time and heat dissipation.
Damped Light Mode and OneShot125 mode supported.
The ESCs support OneShot125 high speed throttle signal and regular throttle signal (within 500Hz) modes.
Damped light mode improves the motor retardation and allows users to brake the FPV drones more efficiently.
The twisted-pair throttle signal cable effectively reduces interference produced in signal transmission and makes the flight much more stable and reliable.
BLHeli firmware ready, users can flash or upgrade the BLHeli firmware via the signal cable (on ESCs), and program 4 ESCs simultaneously after connecting their flight controller to the BLHeliSuite software if the flight controller uses the CleanFlight firmware.
The use of F396 48MHz MCU, imported MOSFETs (Toshiba MOSFETs for 20A) and ceramic capacitors, 3-in-1 drive ICs, 3-ounce copper, 4 layers of PCBs and other quality components guarantees less heat, higher efficiency and rapider response.
Model: XRotor Micro BLHeli
Cont. Current: 20A
Peak Current: 30A
LiPo cells: 2-4S LiPo
BEC output: No
Input wires: Red-20AWG-100mm*1; Black-20AWG-100mm*1
Output wires: No wires but solder tabs
Throttle range calibration: Supported
Stick programming: Stick Programming/BLHeliSuite
DEO: Not supported
OneShot mode: Supported
Light color: Not supported
Motor rotation: Supported
Applications: FPVs with 130-280mm diagonal wheelbase
Size: 24.0 * 13.9 * 5.5mm / 0.94 * 0.55 * 0.22in (just the panel size)
There may be some deviation due to manual measurement.
Package size: 11 * 10.5 * 1cm / 4.3 * 4.1 * 0.4in
Package weight: 27g / 1.0oz
Poly bag package
1 * Hobbywing XRotor Micro BLHeli 20A 2-4S ESC
1 * Manual