This tumbler drone with beautiful appearance is attractive and can protect the aircraft all-round. A good choice for the novice. With the headless mode, 3D flip and one key return functions, you will have a wonderful flying experience!
Anti-crush tumbler design, 360 degree all-round protection, fine workmanship, more safer for drone.
LED light enables you to fly in the dark at night.
2.4GHz technology adopted for anti-interference.
With one-key return function, the drone can find its way back home easily.
Newest 6-Axis Gyro control system ensures stable flight and easy operation.
With attractive headless mode, completely solving pilot loss-of-orientation problems.
High/low flying speed switch mode and 3D eversion function let you have a cool flying play experience.
It can hit obstacles in air and keep flying; it can land on uneven or sloped surfaces; it can upright itself without human interference.
Item name: Tumbler Aircraft
Remote controller: 2.4GHz mode 2
Channels: 4 Channels
Function: Forward/backward, up/down, left/right, sideward flight, hovering, 3D-flip, headless mode, one-key return, H/L speed, LED lights
Control distance: About 30m
Battery for quadcopter: 3.7V 300mAh li-po
Battery dimension: 35 * 20 * 7mm
Charging time: About 40 minutes
Working time: About 5 minutes
Battery for remote controller: 3 * AA battery (not included)
Item dimension: 130 * 90mm / 5.1 * 3.5in
Item weight: 25g
There might be some deviation due to manual measurement.
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction manual before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Package size: 22 * 17.5 * 16.7cm / 8.6 * 6.8 * 6.5in
Package weight: 453g / 1.0oz
Gift box package
1 * Drone
1 * 2.4G Transmitter (mode 2)
1 * 3.7V 300mAh Li-Po Battery
1 * USB Charging Cable
4 * Spare Propellers
1 * English Manual
FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
First, battery fully charged, then power on the drone and the transmitter within 2 seconds.
2. One or more motors don't work.
When binding, drone on flat surface, or motor damaged.
3. Accessories missing.
Check gift box package inside and outside carefully, or contact custom service.
4. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propellers is installed in the right way.
5. During the charging, battery and charging cable melt.
USB charger only for DC computer USB port, never for AC circuit and remember never over-charging.