This original JJRC H8DH RTF RC quadcopter with 3D rolling function features high quality and durable performance. This quadcopter is equipped with 2.0MP HD camera that is good for the files of pictures and videos to be directly stored in the memory card. Besides, the 2.4GHz frequency, more accurate operation, more sensible response and further RC distance. Moreover, headless return mode is easy to enter or exit, so your can play many tricks with this quadcopter. By applying the set-height mode, the quadcopter could fly smoothly at the height which the player sets. Importantly, 5.8G FPV real time image transmission allows you to enjoy the views more convenient, so it's easier for operation and the aerial photographing. This is the best choice for you to enjoy more flying joys.
LED light for night tracking.
3D-flip to experience cool flying play.
2.0MP HD camera allows you to take photos and videos.
One-key return will never be worry about missing it.
Set-height mode could fly smoothly at the height which the player sets.
With headless mode, no need to adjust the position of aircraft before flying.
5.8G real-time transmission share the videos and photos to the LCD screen at anytime anywhere.
Boundless speed variable could adjust the speed of the side fly and forward / backward at your will.
Lower power security warning will largely reduce the possibility of your quadcopter descending on a further or insecure zone.
Gyro: 6-Axis Gyroscope
FPV transmission frequency: 5.8G real-time
Remote controller: Mode 2 (left hand throttle)
Plug type: EU plug
Flight time: approx 8mins
Quadcopter charge time: approx 100mins
Control distance: approx 200m
Quadcopter battery: 7.4V 500mAh lipo battery (included)
Battery dimensions: 45 * 23 * 10mm
Transmitter battery: 4 * AA Battery (not included)
Camera: 2 Million High-Definition
Functions: ascend/descend/forward/backward/side flying/360°rolling action/hover/LED light/2.0MP camera/5.8G transmission/One-key return/Headless mode/Speed switch mode/Set-height mode
Suitable for: Above 14 years old
Item dimensions: 325 * 325 * 108mm (artificial measurements error allowed)
Item weight: 107g (battery excluded)
5.8G FPV specifications:
Clarity of the video: 1280 * 720P / 30FPS
Pixel of the photo: 1600 * 1200
Light sensation chip of camera: 1 / 4 inch HD Color CMOS
Size of the camera: 4P visible degree 68 degree
Video standard: PAL/NTSC
Zone of pictures: 3888um * 2430um
Output of video: 1.0Vp - p / 75 Ohm
5.8G receiving sensitivity: - 94dbm
Working volt of screen: DC 3.3 - 4.2V
Working volt of screen: DC 3.3 - 5V
Launch power: 20mw
Package size: 45.5 * 25 * 9cm / 17.9 * 9.8 * 3.5in
Package weight: 1151g / 2.54lb
Brand gift box package
Despite the new version aircraft equipped with set height mode function, the item NO. on the aircraft does not change temporarily.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
1 * JJRC H8DH RC Quadcopter
1 * Transmitter (Mode 2)
1 * 7.4V 500mAh lipo battery
1 * EU Charger
1 * Plug Converter
2 * Landing Gears
2 * Spare Propeller Blades
4 * Protect Cover
1 * Screwdriver
1 * 2.0MP Camera
1 * 5.8G FPV Monitor
1 * FPV Monitor Charge Cable
1 * Antenna
1 * English Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.