NOTE：DHL Express Mail Service Freeshipping（3-7 business days）
UPair One is a quadcopter which equips with a built-in flight control system, a gimbal and a camera. Despite the basic functions as ascending and descending, it's also capable of shooting, video recording, one key return, and auto return triggered by low battery voltage.
2.4G technology adopted for anti-interference to about 1km communication range.
5.8G Real-time image transmission enables you to share the videos and photos to the LCD display at anytime anywhere.
Stronger wind resistance, strong stability, easier to be controlled.
One key return function, specially under the failsafe or low battery voltage situation.
Two-axis stabilization gimbal is designed.
Stay firmly in the set height under the altitude hold flight mode.
Equipped with a 4K HD camera supporting 1080P video recording.
About 19 minutes flight for full-load condition.
Brand name: Gten Drone
Brand model: Upair One
Item type: quadcopter
Max Vertical Speed: 4.5m/s
Max Tilt Angle: 45°
Max Pan Speed: 14m/s
Functions: Sideward flight, turn left/right, forward/backward, ascend/descend, one key return, failsafe auto return, auto return triggered by low battery voltage, shooting, video recording.
Intelligent Flight Battery: 11.1V 5400mAh Lithium Battery
Charging Time: 1~1.5h
Working time: 19 minutes for full-load / 25 minutes for aircraft alone
Remote controller: 2.4GHz (default mode 2)
Channels: 10 Channels
Transmitter battery: 11.1V 2200mAh 8C Lithium Battery
Battery dimension: 101 * 40 * 10mm
Remote distance: about 1000m
Real-time Transmission: 5.8GHz FPV
Camera: 4K SONY Lens
Video/Photo Format: .MOV/.JPG
Camera Battery: 3.7V 1680mAh 6.2Wh Lipo Battery
Camera Working Voltage: 5V
Supported Maximum TF Card: 32G
Camera Charging Time: 2~3h
Gimbal: Two-axis stabilization gimbal
Gimbal Controlled Range: -30°~90°
Item dimensions: 420 * 420 * 220mm
Item weight: 940g
Package size: 47 * 34 * 22.5cm / 18.5 * 13.4 * 8.9in
Package weight: 4112g / 9.1lb
Gift box package
This RC model is not a toy and is not suitable for children under 14 years old.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
1 * Gten UPair One Aircraft with 4K Camera
1 * Transmitter (mode 2) with LCD Display
1 * 11.1V 5400mAh Lithium Battery for Aircraft
1 * 11.1V 2200mAh 8C Lithium Battery for Transmitter
2 * Pair of Propellers
1 * Balance Charge for Aircraft Battery
1 * Balance Charge for Transmitter Battery
1 * Charging Cable with EU Plug
1 * English User Manual
1. How to judge which part is nose and which is tail?
The LED flight indicators on the aircraft arm indicate the directions of the aircraft. When the aircraft is powered on, the LED indicators light up. The red indicator represents the nose while the green indicator represents the tail.
2. Can I change the Mode set of remote controller?
If you are capable of mechanic and quite familiar with the internal structure of the remote controller, you can open the bottom cover and try to change the mode set.
3. What is the linking procedure?
When the remote controller and the aircraft are powered on, hold down the "FPV FM" button on the back of the remote controller, the indicator blinks, indicating the auto linking is started; When the indicator changes to solid green, then the linking is successfully established. When two or more quadcopters are operated at the same time, if the frequency points are in conflict, it is advised to reestablish the linking, please press the "Linking" button of the aircraft to change to another channel, then hold down the "FPV FM" button on the back of the remote controller, when the current images on the FPV screen are confirmed to be streamed down from your aircraft, it indicates the linking is successfully established.
4. How to charge the remote controller?
Slide down the rear cover of RC battery compartment, pull the battery out. Charge the RC battery by connecting the RC battery with the charger. When the charger indicators turn red, it indicates charging is in process; when the charger indicators turn green, it indicates the battery has been fully charged. If the charger indicators blink red and green, it indicates the charger has been powered, but has not been correctly connected with the battery. Disconnect the RC battery with the charger when it is fully charged, then put the battery into the battery compartment.
5. Accessories missing.
Check gift box package inside and outside carefully, or contact custom service.
6. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propellers is installed in the right way.
7. Does the UPair One has Return-to-Home function?
It not only has one key return function, but also features failsafe auto return and auto return triggered by low battery voltage.