This original XT-FLYER XT001A quadcopter is equipped with 360° Eversion and high/low speed function that makes your flight experience more fun than you could imagine. And the headless mode and lightweight design enables you control it more easily so that you can fly just about anywhere.
Compact and lightweight design.
LED light enables you to fly in the dark at night.
2.4 GHz technology adopted for anti-interference.
Equipped with protective frame to reduce damages due to crash.
With Headless Mode, no need to adjust the position of aircraft before flying.
Built-in 6-Axis Gyro, stronger wind resistance and more stable, for both indoor and outdoor flight.
High/low flying speed switch mode and 3D eversion function for you to experience cool flying play.
Brand name: XT FLYER
Item name: XT001A
Remote control frequency: 2.4GHz
Channels: 4 Channels
Gyroscope: Six axis
Motor: Coreless motor
Function: Up/Down, Left/Right Sideward Flight, Forward/Backward, Turn Left/Right, 360° Eversion, Headless Mode, H/L Speed
Remote distance: 70m
Battery for quadcopter: 3.7V 390mAh, Li-po battery
Battery of remote controller: 6 * AA batteries (not included)
Charging time: 40 minutes
Working time: About 6-8 minutes
Battery dimensions: 37 * 20 * 8mm
Item dimensions: 135 * 135 * 100mm
Item weight: 40g (Including Battery)
Package size: 19.5 * 16.7 * 15cm / 7.7 * 6.6 * 5.9in
Package weight: 463g / 1.0lb
Gift box package
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
This RC drone is equipped with coreless DC motors, continuous using with different batteries is not suggested.
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
1 * XT-FLYER XT001A RC Quadcopter
1 * 2.4G Transmitter (mode 2)
1 * USB Charging Cable
1 * 3.7V 390mAh, Li-po Battery
2 * Pairs of Propeller
2 * Transmitter Levers
1 * English Manual
FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
First, battery fully charged, then power on the drone and the transmitter within 2 seconds.
2. One or more motors don't work.
When binding, drone on flat surface, or motor damaged.
3. Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
4. Accessories missing.
Check gift box package inside and outside carefully, or contact custom service.
5. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propellers is installed in the right way.
6. During the charging, battery and charging cable melt.
USB charger only for DC computer USB port, never for AC circuit and remember never over-charging.