Are you looking for a durable, easy to fly quadcopter to learn how to fly? Then the E902 quadcopter is a great value choice. This quadcopter features a high precision 6-axis gyro stabilization system providing locked-in flight performance that is perfect for both beginners and advanced pilots alike. There is even a one button flip function that will allow you to flip or roll the quad as your skills progress with a simple button push on the transmitter! It also features one key to return function leaving the loss-of-orientation problem behind!
2.4GHz full function transmitter (Mode 2, left stick throttle) for your easy control.
Built-in 6 axis gyro, strong stability, easily implement various flight movements.
Amazing functions such as 360 degree rotating, a key return, headless mode flight, up/down, left/right sideward flight, forward/backward, turn left/right.
With colorful LED light, can flight in the dark at night.
Fully-assembled, no building necessary.
Brand: Create Toys
Controller mode: Mode 2
Frequency : 2.4G
Gyro: 6-Axis gyro
Motor: Coreless motor
Function: up, down, left, right, forward, backward, 3D Roll, headless mode, auto-return
Charging time: about 60mins
Flight time: about 5mins
Control distance: about 100m
Transmitter battery: 4 * 1.5V AA battery (not included)
Battery power: 3.7V 650mAh Lipo Battery
Battery size: 41 * 25 * 8mm
Quadcopter size: 279 * 212 * 133mm
Quadcopter weight: 99g
This RC model is not a toy and is not suitable for children under 14 years old.
This RC drone is equipped with coreless DC motors, continuous using with different batteries is not suggested.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
Package size: 33 * 25 * 20cm / 13.0 * 9.9 * 7.9in
Package weight: 845g / 1.9lb
Gift box package
1 * E902 Quadcopter
1 * Transmitter (mode 2)
1 * 3.7V 650mAh Lipo Battery
2 * Pairs of Spare Propellers
1 * USB Charging Cable
1 * Screwdriver
1 * English Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.