The SkyRC TS120 Brushless Sensored ESC is built with the highest quality components to ensure true-to-rating current handling and high efficiency operation. Its features enhanced throttle response, excellent acceleration, strong breaks and throttle linearity, which is suit for 1/10 and 1/12 on-road and off-road car or 1/10 and 1/8 crawlers.
Users could set the turbo and boosting timing which can improve the motor RPM to get its best performance.
Well-performed throttle and brake control function could control the punch/brake rate by point and the point can be set by user. The precision of the punch/brake rate is 1%.And the user could also custom the throttle/brake curve.
Punch control is reasonable and precise and it can meet different customers' request for line and power.
Red copper connector is used internal of the ESC. It can decrease the internal resistance at high current situation and the thermal resistance.
The circuit is managed by intelligent thermal management kernel algorithm which can improve driving skill and adjust the control time of the dead band. The dynamic loss can be reduced effectively when the motor is running at high speed or the user changes the motor speed frenquently so that the motor can be more stable when running.
The internal resistance can be reduced by laminated copper stack control technology and cooling fan design so that the dynamic thermal equilibrium can be got. In this case, the aluminum heat skins can works effectively.
The electronic switch is built in so that it could save space. And the electronic switch is more sensitive and reliable.
The user could set and store 10 sets of profiles in the ESC. These data could be called out at any time without any special program setting. All the setting can be exported or imported so that the user could compare and analyze.
Safety features:low voltage protection, motor and ESC overheat protection and signal lost protection.
It can be programed by Program Box(SK-300046), PC via SKYLINK(SK-600013) or samrt phone via Bluetooth Module(SK-600058).
The firmware can be updated by connecting the ESC with PC or smart phone.
It can be off by keeping the trigger to full brake for 8 seconds when running.
Power supply: 2S-3S LiPo battery, 4S-9S NiMh battery
BEC output: 6V/3A
Constant current: 120A
Burst current: 760A
Resistance: 0.0003 Ohm
Item size: 39 * 31 * 19mm (without cable)
Item weight: 45g (without cable)
It is not a toy and suitable for users older than 14years old.
Never allow water, moisture, oil or other foreign materials to get inside ESC, motor, or on the PC Boards. It may damage the ESC completely.
Never disassemble the ESC and modify the components on PC Boards.
Suggest using the original wires and connectors which are packed in the box.
Never solder one part for more than 5 seconds as some components will get damaged by high temperature.
Never run the ESC w/o load at full throttle and it may damage the bearings and other moving parts.
Please make sure the location where to fix the ESC has good airflow ventilating so that the heat could dissipate quickly.
To avoid short circuit, please keep the ESC connectors far awwayfrom other metal parts.
Never connect the battery in polarity in reverse.
Please remove the pinion gear before performing calibration and programming functions with the connectors (It is easy to get loose when running).What's more, make sure the cables not touch the moving parts.
Electronic motor timing will increase the temperatures of ESC and brushless motor. Use extreme caution when setting up and testing your application to avoid overloading and overheating.
Incorrect Boost and Turbo timing setting may cause permanent damage to the ESC and motors. Please choose proper ratio and timing setting according to motor's instruction.
To avoid signal interference, plaese always turn on the transmitter first THEN turn on the speed control. Do the opposite when powering it off.
Never use faulty accessories, e.g. motor which may damage the ESC. Always insulate exposed wiring with heat shrink tubing or electrical tape to prevent short circuits, which can damage ESC too.
Always disconnect the battery pack from the speed control when not in use to avoid short circuits and possible fire hazard. When the ESC is switched off, there is still small current and it may cause over discharge of the battery after some time.
The ESC can support 4-9 cells NiMH or 2-3 cells LiPo battery.
Package size: 13.5 * 10.8 * 4.3cm / 5.3 * 4.3 * 1.7in
Package weight: 143g / 5oz
Brand gift box package
1 * SkyRC TS120 120A Brushless Sensored or Sensorless ESC
1 * English Manual