The Yizhan i6W adopts 2.4G frequency technology. With 0.3MP camera, you can captures and records every beautiful and unforgettable moment. Also, it can realize one key return and 3D-flip. Built-in six-axis gyro will promise you a stable flight. Mini size but powerful hexacopter.
Compact and mini size.
Wifi real-time transmission shares the videos and photos to the phone at anytime anywhere.
Attractive 3D-flip function brings more fun.
One-key return function makes it easily find the way home.
6-axis gyro ensures more stable flying and be easy to control.
0.3MP camera captures and records every beautiful and unforgettable moment.
Bright LED lights will bring better orientation.
2.4G technology adopted for anti-interference, more copters flying together can not interfere with each other.
High/low speed modes for both beginners and experts.
With headless mode, no need to adjust the position of aircraft before flying.
Controller mode: mode 2
Gyro: 6 axis
Control channel: 4 channel
Working frequency: 2.4G
Flight time: about 5mins
Charging time: about 65mins
Control distance: about 30m
Function: forward/backward/up/down/wifi/one key return/3D-flip/high low speed
Battery for quadcopter: 3.7V 450mAh Li-po battery(built-in)
Battery for transmitter: 4 * 1.5V AA Li-po battery(not included)
Dimension: 130 * 120 * 40mm
Package size: 23.5 * 21.5 * 12cm / 9.2 * 8.5 * 4.7in
Package weight: 722g / 1.6lb
Brand gift box package
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
This RC model is not a toy and is not suitable for children under 8 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
1 * Yizhan iDrone i6W RC Hexacopter
1 * Transmitter(Mode 2)
1 * 3.7V 450mAh Li-po Battery
3 * Spare Pair of Propeller
6 * Protective Guard
2 * Landing Gear
1 * USB Charging Cable
1 * Phone Holder
1 * Screwdriver
1 * User Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.