Introducing the next generation of the famed Magnum line, the Mini Magnum 2.
Featuring a 35amp BLHeli32 capable ESC board, current sensor, on-board capacitors, and capable of running 2-6s lipo batteries, no longer will there be limits to the capabilities of an all-in-one stack in this 20*20 formfactor.
Engineered around an F4 processor with an MPU600 gyro, tuning and perfect flight performance will be easier to achieve than ever. Including built-in programmable RGB LEDs, distinction between different builds and custom status updates offer a wide variety of customizability for any situation and requirement.
Utilizing a newly engineered video transmission frequency controller, channel selection can now be programmed from an external transmitter without the need to physically access the video transmitter.
With On-Screen-Display, information regarding your craft will be easy to access while in flight directly on your video feed.
With all the electronics needed, assembled together in an accessible package, building a custom craft will only require a frame, camera, set of motors, and a compatible receiver.
Brand name: EMAX
Item name: mini magnum 2 F4 35A stack
Total weight: 17.21g
F4 flight controller:
MPU6000 accelerometer/gyro (connected via SPI)
Integrated 5V/3A BEC
Dedicated PPM/ Sbus receiver input
30x27mm board with 20mm mounting holes
35A BLHeli_32 ESC:
Continuous current 35A ( max burst 40A)
Supply voltage 2-6S Lipo( 1700kv Motor LIMIT for 6S )
BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
Top quality MOSFET
3oz high TG PCB board
32x37mm board with 20mm mounting holes.
Frequency band: 5658-5945MHz (FCC Compliant Channels / with HAM unlock)
TBS Audio Control
Transmit power: 13dBm/23dBm(25mW/200mW)
Supply voltage: 4.5V-5.5V
Antenna port: 50Ω
Package size: 8 * 5.5 * 5.5cm / 3.1 * 2.2 * 2.2in
Package weight: 50g
1 * EMAX mini magnum 2 F4 35A stack