Features:
Adopts the most advanced chip to improve the function of the stepper which also makes the stepper work silently.
Comes with a heat sink to greatly improve the heat dissipation.
Drive current algorithm: i=Vref * 1.9/2.5, the default Vref about 0.65v, so the default current 0.5A, the maximum current 1A.
Vref measurement of Gnd and potentiometer intermediate voltage.
Use of the TMC2100 drive module:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Please pay attention to direction.
3. The heat sink directly attached to the PCB.
4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988. And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.
Specifications:
Material: Metal
Type: MKS TMC2100 Stepper Motor Driver
Item Size: 2 * 1.5 * 1cm/ 0.8 * 0.6 * 0.4in
Item Weight: 2g/ 0.05oz
Notes:
1. Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
2.The measurement of the voltage should be switched on. Don't just connect the USB power supply.
3. Please pay attention to the direction, do not insert reversely.
4. The working temperature might be high without fan. The working temperature is about 70°C when working current is around 0.5A, and over 150°C when working current is around 1A , which may cause losing step. In order to let the stepper work better, please keep the working current around 0.5A.
Package List:
1 * TMC2100 Stepper Module
1 * Heat Sink with Sticker
1 * Screw Driver