OCTAVE LOOP is a simple and professional loop pedal that gives you 24bit uncompressed recording quality. Whether positioned in before or after the effect-chain, OCTAVE LOOP will maintain the original tone of sound. The newly designed arrow display lets you actually "see" the recording. Its built-in -1 octave effect allows the guitar to play the bass line. If you want a simple, compact and professional loop pedal for performance on stage, OCTAVE LOOP is all you need!
Features:
Professional guitar loop pedal with 5 minutes recording time.
24bit uncompressed recording quality, maintains the original tone of sound.
Built-in -1 octave effect allows you to creating your own style bass line.
3 stop modes: stop instantly; stop at the end of the current playback; fade out in 10s.
With Ctrl In for connection a single-switch pedal as the stop/clear or octave effect switch.
Support 9V battery or DC 9V AC adapter power supply(both are not included).
Other Features: playback volume adjust; 6.35mm Input & output jacks; true bypass; USB firmware updating.
Specifications:
Recording Time: 5 minutes
Input & Output Jacks: 1/4" mono jacks
Impedance: 1MΩ(input); 1kΩ(output)
Ext. SW: 1/4" mono jack
Frequency Response: 20Hz-20KHz
THD + N: 0.04%
Dynamic Range: 96db
Residual Noise Level: -95dBu
Power Consumption: 55mA-60mA
Power Supply:
9V battery or DC 9V AC adapter(both are not included)
Item Size: 12 * 6.5 * 3cm / 4.7 * 2.6 * 1.2in
Item Weight: 240g / 8.5oz
Note：
The Out jack is also the power trigger, so make sure the jack is always connected to keep the power on.
Please use the DC 9V power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.
Package List:
1 * Loop Pedal
1 * User Manual(English & Chinese)
