Condenser microphone kit for studio broadcasting & recording, network singing, etc.
The condenser microphone adopts accurate electronic circuit, low noise, wide dynamic range and high sensitivity output.
Cardioid pick-up pattern, isolating the main sound source and minimizing background noise for best vocal.
The adjustable metal shock mount with locking knob can reduce handling noise effectively.
Sturdy and durable steel scissor arm stand, folding type, flexible to use and convenient to carry; can be mounted on the announcers' table easily.
Comes with an anti-wing foam cap and 2 pop filters for protecting the mic against wind interference and hissing & lisping sound, ensuring loud and clear sound.
3.5mm male to XLR female cable for connecting the mic to computer or other devices.
Microphone Material: Metal
Scissor Arm Stand: Steel
Polar Pattern: Cardioid
Frequency Response: 30Hz-18KHz
Sensitivity: -36dB±2dB(0dB=1V/Pa at 1kHz)
Output Impedance: 250Ω±30%(at 1kHz)
Load Impedance: ≥1000Ω
Equivalent Noise level: 18dBA
Max. SPL: 135dB (at 1KHz ≤ 1% T.H.D)
S/N Ratio: 76dB
Electrical Current: 3mA
Cable Length: 2.5m / 8.2f
Package Size: 41.5 * 28 * 8.5cm / 16.3 * 11 * 3.3in
Package Weight: 1.52kg / 3.3lb
The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V
) for it.
When connected with laptop computer
, please connect the laptop to electrical outlet
, or use a 48V phantom power
to get enough power if the sound is not clear and high enough.
The microphone can not be used
with mobile phone
and tablet computer
. And it is not suitable for Mac
If you want better sound effect, a sound card should be used.(not included)
1 * Microphone
1 * Shock Mount
1 * Foam Cap
1 * Cable
1 * Pop Filter
1 * Mini Pop Filter
1 * Scissor Arm Stand
1 * Table Mounting Clamp