Price on the app only:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Replacement Maple Neck Rosewood Fingerboard for ST Strat Electric Guitar
Imported Canadian maple neck and Indonesian Rosewood fingerboard.
6.35mm colorful position markers made of shells.
The fingerboard is fitted with black dots (position markers) and 22 frets.
10mm head machine peg holes for tuner installation.
Adjustable truss rod has been installed at the headstock.
Neck wood: Maple
Width at Nut: Approx. 4.2cm / 1.65in
Heel width: 5.6cm / 2.2in
Heel Depth: Approx. 2cm (0.8in); with fingerboard 2.6cm (1.02in)
Frets: 22 frets
Peg holes diameter: 10mm / 1.4in
Guitar neck total length: Approx. 67cm / 26.4in
Guitar neck weight: 652g / 23oz
Package Size: 67 * 10 * 4cm / 26.4 * 3.9 * 1.6in
Package weight: 824g / 29oz
1 * Strat Style Guitar Neck
Questions & Answers
Mine is 25 1/2 . I would contact the seller and we if you can get a new one
By Ian on April 25, 2018
neither, this is a metric rendition... an asian model that doesn't even fit the strat standard heel dimensions. you've been warned.
By cheeswisz on April 8, 2018
no it's definitely a chunky c
By the higgnbe on December 29, 2017
No its not too bad but you will need machine heads/tuners. You'll also need a small drill bit to pre drill the holes to attach the machine heads. I had little to no problems with this neck but the frets extend a little over and they're sharp. Buy a file for those and you'll be golden.
By Jesse on October 8, 2017
Measure from the bridge to the nut. The scale length has to match to use this neck. Also, the neck pocket may have to be enlarged for proper fit.
By Harvey J. Whitehead on August 10, 2017
Tricky. If you are a right handed player you fret with you left hand lol. This is a right handed neck...and for the price, a good one! I smoothed the fret ends prior to fitting to the body. It performs well and is good looking.
By Harvey J. Whitehead on June 20, 2017
Right-handed. A standard (right-handed) headstock places the tuning knobs in an upright direction (when held in a playing fashion). For a specifically left-handed neck, look for one where the headstock places the tuning knob holes on the right side (if the neck is pictured with the headstock at the top).
By TJ on June 20, 2017
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contactsopen this forum in full page
based on 128 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!Write a Customer Review
By Paul Madairy
October 30, 2017
This is a good quality replacement neck. For those of you who are not sure what that means, here is a quick overview. On my neck, the truss rod was installed correctly, the tuner holes were aligned and drilled straight, the fret markers were good, and the finish was consistent. The frets needed to be leveled and dressed, and the plastic nut is cheap. To put this in perspective, i have bought necks from most of the big builders including Warmoth, Mighty Mite, and Fender. Every one of them required the same amount of work that this neck needed to be functional. So your $300 Warmoth finished neck will also need the frets leveled and dressed, and the nut installed and adjusted properly. This neck is a steal at under $40!!!! I have put it on a les paul bolt neck telecaster, and the guitar resonates and sounds great. To show that i put my money where my mouth is, i also purchased 2 more of these necks for future projects.
October 28, 2017
I give it 4 star because about 4 fret was a bit higher then the rest so I have to lever them and then crawn them. If you know how to do this it won't be a big deal. For this price I can't really complain compared with the 200 dollar for the one from fender company. Other then this the neck was deliver fast and with no damesh it all. If you buying this neck to upgrade your fender squire like I did, be aware that this neck it's about a 1/8 thicker and you are gonna have to do some trimming to make it fit in the body. Not sure if this apply to all fender squire but it did for mine wish is a fender squire 2 1990. Good luck!
October 21, 2017
You will have to shape the heel to fit the pocket, of course, that should be expected with any replacement neck. Also, there are a couple of high frets causing buzz on mine. This too can be remedied fairly easily. The frets above 18 or so start getting slightly jagged, but I don't typically play that high so its not a big deal for me. This neck did give me more sustain and improved the overall tone. It really brought out the low end like I hoped that it would. The only other thing is that I will eventually replace the nut that came on it with a better one. Finally, I would recommend it to anyone wanting to replace a Squier neck, but the neck on my MIM is much better than this(in terms of finish and fret work), and I wouldn't even think about putting it on anything more expensive than that.
April 18, 2017
My neck just got here today. Great price and on time shipping. Now, what about the neck itself? Well, It's straight and well finished with no frets sticking out or being sharp. Running my hand up and down the neck it feels as good as any neck I've had. I'm going to have to fit it to my neck pocket, but that's not unusual. The guitar I'm putting this on is very good with top notch electrics and an excellent finish. Not some crumby looking road-worn frankencaster. This neck matches the body in terms of quality and feel very well. So if you need an inexpensive neck, this is for you.
By Rae C.
January 4, 2018
October 21, 2017
April 12, 2017
January 11, 2017
By the higgnbe
December 2, 2016
i bought two of these and they don't disappoint you need to be prepared to put in some fret work but no more than on more expensive items i love the heft of the feel the finish is minimal and I like that overall i will probably do it again but again be warned they will probably need some work
January 13, 2016
December 23, 2015
December 21, 2015
November 15, 2015
September 24, 2015
September 22, 2015
September 22, 2015
August 30, 2015
August 27, 2015
February 21, 2015
December 13, 2014
Top Sellers More
Your question has been submitted successfully
Please activate your account first. We will resend the activation email to help you complete your registration.
OUR SITE RUNS OF COOKIES