This temperature controller features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. It is suitable for green house, dog house, incubators, etc.
Can show the measured temperature, start temperature and stop temperature at the same time.
Digital tube LED display for clear readings, 4 buttons for easy operation.
Pre-wired cord with a plug, plug and play design for convenient use.
Heating/Cooling modes, can set the start/stop temperature freely.
Temperature measuring range: -9°C~99°C; resolution: 0.1°C.
High precision air sensor probe ensures accurate measurement.
Includes temperature calibration function.
Built-in indicator light to indicate working status.
Widely used for appliances of living room, bedroom, kitchen, incubation room, etc.
Display: LED Digital Tube
Temperature Measuring Range: -9°C~99°C
Control Precision: 1°C
Measuring Accuracy: ±0.1°C
Power Supply: AC 110V-240V
Plug Type: US Plug
Refresh Rate: 0.5s
Temperature Calibration Range: (+/-)9°C
Measurement Input: NTC(10K0.5%)Air Sensor
Output: Relay 10A One Load
Static Current: less than 40mA
Attraction Current: less than 65mA
Working Environment: -10°C~60°C, Humidity 20%~85%
Working Modes: Heating or Cooling Mode
Power Cable Length: Approx. 150cm / 59in
Item Size: Approx. 14.2 * 9.8 * 4.4cm / 5.59 * 3.86 * 1.73in (L * W * H)
Item Weight(with Sensor and Power Plug): Approx. 288g / 10.16oz(Without Battery)
Package Size: Approx. 20.5 * 14.3 * 7cm / 8.07 * 5.63 * 2.76in (L * W * H)
Package Weight: Approx. 373g / 13.16oz
1 * Temperature Controller with Air Sensor
1 * User Manual(English)