1000W Mini Electromagnetic Induction-Heater 800℃ High Temperature Handheld Heating Device for Remove Rust Bolt Screws

This is a kind of quality electromagnetic induction heater, with soft-start function, with long service life, safe and reliable, under frequent starts. Adopts high-performance IGBT driver chip to drive, can precise drive and output waveform. Automatic load identification and phase lock function, so that the load side can get a higher power factor, and the circuit can be accurately controlled in the weak inductive area and work efficiently. Help remove rusted fasteners and parts, you can have a try.

Features:
With soft-start function, with long service life, safe and reliable, under frequent starts.
With IGBT overcurrent-protection function.
With input and output overcurrent-protection, automatic adjustment negative feedback function.
With IGBT over-temperature-protection function.
With heating coil short-circuit-protection function.
With heating coil open-circuit-protection function.
Full-bridge series resonance circuit topology, with strong anti-interference ability.
Adopts high-performance IGBT driver chip to drive, can precise drive and output waveform.
Automatic load identification and phase lock function, so that the load side can get a higher power factor, and the circuit can be accurately controlled in the weak inductive area and work efficiently.
Several electromagnetic heating controllers are installed in parallel on the same heating tube without interference.
Power saving, and easy installation, it can be connected to induction coils of barrel type and flat plate type, and etc..

Specifications:
Name: Electromagnetic Induction Heater
Model: FH-1000
Main material: metal
Voltage: 220V/110V optional
Frequency: 50/60Hz
Rated current: 4.5A
The maximum output current: 150A
Power: 1000W
Highest heating temperature: 800℃
Instrument-protection temperature: 80℃
Ambient temperature: -40℃ to 60℃
Relative humidity: <95% RH
Atmospheric pressure: 86KPa-100KPa
Package size: 450 * 280 * 130mm / 17.72 * 11.02 * 5.12in
Package weight: 3300g / 7.28lb

Packing List:
1 * Electromagnetic Induction Heater
2 * Dia 30mm Coil
2 * Dia 40mm Coil
2 * Dia 50mm Coil
2 * Annealed Copper Wire
1 * Power Adapter(EU, USA optional)