Made of fine quality material, practical, easy to operate and use, has a long service life.
2.4 inch high-definition color screen design, easy to check gas status.
Can set high and low limit alarm value.
Full-function self-test, the product uses sound and light vibration three-level alarm.
Shortcut keys to quickly turn on and off the sound alarm and storage mode.
This detector uses natural diffusion.
The gas is detected by an electrochemical sensor, which has perfect sensitivity and perfect repeatability.
The product can store up to 100000 pieces of test data, and you can view historical data at any time with the software.
The product is easy to use and maintain, and meets the requirements of industrial field safety monitoring for high reliability of the equipment.
The casing is made of high-strength engineering plastics and composite anti-skid rubber. It has high strength and fine hand feel, belonging to intrinsically safe explosion-proof products.
Large capacity battery, the device can be continuously used for at least 8 hours in the constant light mode.
The detector is widely used in petroleum, chemical, environmental protection, metallurgy, oil refining, gas transmission and distribution, agriculture and other industries.
Detect gas: ozone (O3)
Detection range: 0~10.00ppm
Duplicate value: ≤2%
Zero drift: ≤±1ppm
Stability: ≤7% signal value / year
Response time: diffusion ≤60s
Insulation resistance: ≥20MΩ
Alarm function: sound, light, vibration
Working environment: temperature -10℃~50℃, humidity ＜95% RH without condensation
Battery: 1 * lithium battery, 3.7V, 3000mAh (included)
Explosion-proof mark: Exib IIB T 3 Gb
Charging time: 6-8h
Standby time: continuous for more than 8h
Item size: 135 * 66 * 32mm / 5.3 * 2.6 * 1.3in
Package size: 245 * 205 * 80mm / 9.6 * 8.1 * 3.1in
Package weight: 725g / 1.6lb
1 * Ozone Detector
1 * Calibration Cover
1 * USB Cable
1 * Storage Box