5 in 1 multi-functional intelligent machine with built-in vacuum pump, air compressor is the perfect combination of laminating machine and bubble removing machine. Touch system to operate, convenient to operate.
This machine with built-in vacuum pump and air compressor is the perfect combination of laminating machine and bubble removing machine.
It has laminating without bubble removing mode and laminating with bubble removing mode, both with good and fast laminating result.
Adopt advanced constant temperature and constant pressure technology, great vacuum effect, nearly no bubbles.
Independent radiating window and unique heat resistant pipe design, fast radiating.
Built-in customized oilless vacuum pump, quiet operation, long service life.
Emergency stop button and intelligent protection system, safe to use.
Touch system to operate, convenient to operate.
Suitable for iPhone/Samsung/HTC phones, etc.
Laminating without bubble instruction:
Turn on the switch of machine.
Clockwise rotate the emergency stop button softly until the button bounce.
Touch panel system start. Click "setting" - click " laminating setting" - set laminating time to 180s, vacuum time to 15s, laminating temperature to 40°C.
Click "confirm" to finish settings - click "return" to back the first page, and then click "laminating" to start laminating.
Adjust the laminating pressure to 0.35MPa.
Clean the LCD, tear off OCA protective film quickly with a sticker, then put it on the LCD gently and use your finger to tap the middle screen gently.
Put the item on the tray in order and place the tray in the laminating tank, then close the door.
Press "start" button and use one hand to press the door until it is sucked.
When vacuum gauge reaches the default value, the laminating plate will press downward.
When time is up, vacuum door will open automatically, then you can take the screen out.
Fast laminating instruction:
Set laminating time to 20s, laminating pressure to 0.4MPa.
Other settings is the same as the above steps.
Bubble removing instruction:
Click "exhaust" button, open the bubble removing tank door after exhaust finished.
Put the screen into bubble removing tank.
Click "return" button - click "setting" -"bubble remove setting", set the bubble remove time to 10-20min, bubble remove temp to 40°C.
Click "confirm" - "return", start bubble removing after returning the first page.
When time is up and automatic exhaust of bubble removing machine is finished, open the bubble removing tank door and take the screen out.
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts