AT518 Digital DC Resistance Tester, with high precision and wide range, adopts high-performance 32bits ARM processor for fully automatic real-time measurement. It can precisely measure the passive components in any suitation. This meter can measure resistance from 10μΩ to 20MΩ with max. display 20,000 dgt.
Adopts high-performance 32bits processor, measuring resistance range from 10μΩ to 20MΩ.
Built-in large capacity 8.4V 2200mAh rechargeable lithium battery(included) for long time use.
Handheld in design and high quality, portable for use.
Large digital colorful LCD screen for display, Max. display: 20.000 dgt.
The unique current measuring mode can adapt to meet the different needs for measurement.
Built-in temperature compensation module for temperature sensitive components.
Equipped with Mini-USB and USB-Disk interface, Mini-USB interface can apply to remote control, data acquisition and analysis.
Automatic power off, auto zero, data hold function, backlight adjustment.
Suitable for measuring switch contact resistance, connecting resistance, transformer, inducer, motor, deflection coil winding resistance, etc.
All kinds of low, medium, high resistor;
Switch contact resistance;
Enamel-insulated wire resistance;
Relay/switch connector contacts;
Transformer, inducer, motor, deflection coil winding resistance;
Metal riveting resistance of vehicle, vessels, airplane;
The resistance of motor and transformer;
Printed board line and hole resistance;
Low resistance character of Electromechanical Components
Measuring Parameters: DC Resistance
Measuring Range: 10μΩ~20MΩ
Signal Source: Max. Current: <1A; Current
Mode: High Current, Low Current
Range: Automatic, Manual, Nominal 10 Ranges
Speed: 30 Time/Second; 15 Time/Second; 3 Time/Second
Result Display: ABS(Absolute Deviation)/Relative Deviation/SEQ(Sequence)
Max. Display: 20,000 dgt
Calibration: Full Range Short Circuit for Reset
Comparator: Built-in Sorting Record, GD/NG Sorting Result Display
Trigger: Internal, Manual, Remote
Interface: Built-in Mini-USB (Virtual Serial Port); Charging Interface; U-disc Interface
Temperature Compensation：0~80°C，Accuracy: 0.2°C
Input: 100-240V 50/60Hz 0.35A
Output: 9V 1A DC 8.4V, 2200mAh Rechargeable Li-Battery
Size of Battery Meter: 21 * 12.5 * 4cm / 8.3 * 4.92 * 1.57in
Weight of Battery Meter: 613g / 21.62oz
Package Size: 31 * 31 * 10cm / 12.2 * 12.2 * 3.94in
Package Weight: 1597g / 56.35oz
1 * DC Resistance Tester
1 * Storage Bag
1 * USB Cable
1 * Pair of 4-Port Test Clip
1 * Power Adapter
1 * Lithium Battery(included)
1 * User Manual (English)