This product is mainly a combination of the M268 and PIC100 two main chip integrated oscillation circuit shaping circuit detection circuit frequency interference suppression circuit. Wireless transmitter tubes and other functions, the input voltage 9-12V, wireless transmission of electrical energy is dedicated chipset, with power, standby current, high efficiency , low temperature, small size and other characteristics, the electromagnetic wave frequency control in 150KHZ below, and medical frequency equivalent to the human body and other electrical appliances without any harm or interfere with, the use of electromagnetic induction principle achieve energy conversion and transmission efficiency up to 80%, is the highest performance wireless power transmission, most secure wireless module , MP268 wireless charging chips are widely used in gaming peripheral products charger(wii controller battery, PS3 controller battery, XBOX360 handle battery, NDSi NDSL battery battery), consumer electronics (electric shavers, electric toothbrushes, LED flashlight, electronic waterproof lights, waterproof mobile phone, electronic candles, magnetic products), digital products ( mobile phone charger, MP3, MP4, speaker,) and other applications.
Features:
Smart charging detection operator dedicated, fully equipped automatically enter standby mode, more energy secure.
Low standby power consumption, high conversion efficiency when a large current low temperature, can transport up to 500MA over wireless high current charging.
Transmitting and receiving custom designed with magnetic isolation raise efficiency across disk, to enhance the energy conversion efficiency.
12bits using high-precision AD.
Fully charged battery is high, more than 95%.
A full range of technical support and personalized solutions specifically tailored to increase the intelligent peripheral management functions.
Multi-strand copper induction coil to provide a more secure, stable and efficient wireless power characteristics of low temperature.
Specifications:
Input Voltage:DC 10-12V
Standby Current:20-40mA
Output Voltage:DC 5 V
Output Current:Rated:600MA MAX:1000MA
Power Output:Rated:3W MAX>5W
Center Resonance Frequency:125KHz
Transmit-receive Distance:2-6mm (best distance 3-4mm)
Package Size: 13.5 * 8.5cm / 5.3 * 3.35in (L * W)
Package Weight: 18g / 0.64oz
Parameters |
Text Condition |
MIN |
Rated Value |
MAX |
Working Temperature (°C) |
25 |
-40 |
25 |
+40 |
Working Voltage (V) |
Normal Working |
9 |
12 |
13 |
Standby Current (mA) |
Normal Working |
20 |
35 |
45 |
Working Current (mA) |
Normal Working |
200 |
350 |
500 |
Wireless Output Voltage (V) |
Normal Working |
2 |
5 |
7 |
Wireless Output Current (mA) |
Normal Working |
200 |
600 |
1000 |
Working Frequency (KHZ) |
Normal Working |
100 |
125 |
145 |
Temperature Rise (°C) |
Normal Working |
15 |
20 |
25 |
Power Output (W) |
Normal Working |
1 |
3 |
5 |
Transfer Efficiency (%) |
Normal Working |
50 |
70 |
80 |
Transmitting Coil (MM) |
36 |
20 |
36 |
42 |
Magnetic Sheet (MM) |
40 * 1 |
25 |
40 |
53 |
Reciever Coil (MM) |
36 |
20 |
36 |
42 |
Magnetic Sheet (MM) |
40 * 40 * 0.2 |
25 |
40 |
55 |
Coil Distance (MM) |
|
2 |
4 |
6 |
Package List:
2 * Transmitter Component