Price on the app only:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Questions & Answers
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contactsopen this forum in full page
based on 649 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!Write a Customer Review
By Adam R.
January 12, 2018
It's been years since i had looked at any wireless flash options, and back then I just gave up because pocketwizards were just too pricey. I havent been much of a flash user over the years despite having the Canon 580 EX II. Recently I found some uses for it and was quickly unenthused by the optical slave method. After seeing Yongnuo mentioned in some Tony Northrup videos, I took a look and found these remote (and the pair of YN622C II that I also picked up) and I'm glad I did. Testing so far has been limited, but the function is everything I could ask for. My 80D doesn't know the difference between this unit and the much pricier Canon model. It also allows me to use the 622c's to control my older 580 EX II which has no radio remote functions built in. (If I were to stick with Canon, optical or a long cable would be my only options and that is far from a good enough reason to spring for the $500+ Canon 600EX RT. Being on a newer body, tgis u it can also trigger the shutter (by pressing the test button on a 622c) without even needing the control cable (which is provided anyway.) All in all, as a non-professional, I look forward to experimenting and learning off-camera flash photography with these transmitters/transcievers.
January 10, 2018
These things rock. These got me to a point where I could finally fire a flash off-camera without having to fool with pointing a trigger flash at my Canon 580 EX II, so now I'm free to experiment more with my speedlite all over the place on its own tripod. Build quality is surprisingly good and I've had no issues! In the past when I bought offbrand photography electronics, the quality would reveal itself when you had to pop the things open to replace batteries, only to be confronted with an exposed circuit board and production cost cuts that resulted in less plastic materials used in the design for basic build structure than there should have been. Not the case for this pair! I can confidently rely on these as a solid piece of kit, and I can get more in the future and it's all compatible! A great value in the market they're competing against.
By Max Rockbin
January 10, 2018
It does everything claimed, does it well and is well made. These wireless triggers are very simple to use and they've worked every time for me. They proved to be completely compatible with my Canon 70d. I haven't had to replace the batteries yet, so they're quite efficient (I've gone through about 1000 exposures with them so far). If I could change anything: As others have noted, the little disk to tighten the transceiver onto a hot shoe are kind of a pain. Levers work much better. The glossy look is fine, but I think this is essentially a professional device and a matter finish just makes more sense for anything related to lighting. I'd like it if they were smaller, but they're roughly the same size as the competition, so that's just life maybe. I've dropped them a couple times on a wood floor. No signs of any damage at all. So they're decently made. NOTE: I am actually using these with manual flashes (but I needed something to fool the Canon camera into thinking it had a TTL mounted on it so I could change the shutter sync to 2nd shutter). So, while I see the various auto TTL settings in the camera available to me, I have not used them, so read another review for that stuff).
By Wing Tang
January 10, 2018
Before i received my wireless flash triggers, I've been using a 32 foot ETTL cable to help get my 580EXII off camera as a master to control the 430 EXII as a slave. Worked great, but the cable was cumbersome and a tripping hazard. So i decided to go all wireless ETTL and after much research, there really wasn't many choices. The pocket wizard system seemed over priced for what it does and that it stands vertical on a camera seems a little out of place. Then my 2nd option was the Yongnuo 622C, for the price i wouldn't hurt to try it out, so i decided to buy 2 sets. They came in the mail quickly along with a set of Eneloop rechargeable batteries I ordered for the triggers. I installed the batteries into the triggers and placed one on top of my 5DMKII and the other two on my flashes. Turned them on to quickly test out if they work or not. Worked perfectly, the 2 flashes went off simultaneously ever single time i took a shot. Anyways, I am not going to get into the mechanics of TTL vs Manual - but they both worked flawlessly depending on how you want to control the light. Bottom line, i couldn't tell the difference from when i used my ocf cable vs my new Yongnuo 622C.And the fact that the unit sits horizontal on top of my camera is plus for me, personal aesthetics I guess. If you have any questions or anything, feel free send a comment.
By Michael J. Frank
January 8, 2018
Amateur photographer here just starting into off camera lighting. Let me start by saying that I have been wanting to move to off camera lighting for some time now. But it was always cost prohibitive to me just being a hobbyist. I stumbled across these triggers and the YONGNUO YN-622C-TX E-TTL Wireless Flash Controller for Canon after watching some videos on lighting. After just a bit of research on reliability and how to set them up I took the plunge. Shipping was quick and packed well. Honestly I did not even read the included documentation as I had already watched countless videos on operation so I cannot speak for the documentation included. Let me tell you these things work, are simple to setup and will not break the bank to buy! In under 10 minutes I had everything working as it should and was shooting away to my hearts content. I could easily change all settings almost like I had been doing it for years. For those of you are looking to take the plunge into off camera lighting. I highly recommend these triggers and the controller linked above. Tested with the following: Canon EOS 5D Mark III 22.3 MP Full Frame CMOS with 1080p Full-HD Video Mode Digital SLR Camera (Body) Canon Speedlite 580EX II Flash for Canon EOS Digital SLR Cameras
January 7, 2018
I am a hobbyist photographer. I was to the point where i felt the need for an ability to trigger flashes wirelessly. The choice came down to Paul C Buff Einstein set or Yongnuo. Took the chance with Yongnuo and got entire system. The 2 TTL Flashes, 1 Wireless Trigger and 4 Transreceivers for Canon. Spent 475ish for this purchase which resulted in savings of about 900 vs Einstein. Really worthwhile and takes my learning to the next level. Entire system is easy to use. I didnt even read the manuals. Was able to get going right away. Flashes are very comparable to my 580 EXII and do the job fine. Here is the kicker. For the price of just one Canon flash, entire system came. YN 622 Transmitter and Transreceivers are simple and easy to use. The first order of Transreceivers seemed like used or returned product. So returned it and got replacement. It was easy fix. If you consider yourself upto an intermediate photographer, and are on a budget, just get this system. You will be happy.
By Jim Hang
January 1, 2018
I finally got this yongnuo YN622 in 2 day. This is my wireless trigger that I bought. I had test them out and they work just very well right out of the box. Oh of course with battery insert. I test it with my 550ex and with my old old Canon 299T and they worked dam well. I just can't believe it trigger my old 299T Canon Flash that bought some 25 year ago. I'll put this on manual mode only. I had order one more set to get control of 3 flash lights. If you have some old flash like I do this would save you some money. My 299T have as much power as 600tex rt, just the range is shorter. And like most pro use in manual mode anyway. Well this is for newbee like me anyway. For the real pro level this is not the case. This is just the infor that it work with my old 299T. This YN622 I saw review somewhere said it work with any 3 pin hot shoe flash as well. I love these units a little big and bulky but light weight. For this kind of price I think this is far more advance compare to other brand. How reliable I don't know yet, time will tell. I highly recommend this to who want to play with off camera flash this is the way to start, and for pro people who don't care about the brand name otherwise you might check with PocketWizard.
December 26, 2017
I really wanted to explore off camera flash so I read the book on canon flash by Syl Arena and bought a long cable from him. Short while after Canon came out with the 600ex-rt flash. I bought it and loved it. But in order to trigger it off camera I'd have to use a long cable. Even at home I found that inconvenient and was sometimes concerned that someone could trip on the cable. I could buy another 600ex-rt and maybe the st-e3. I thought I would further invest in wireless flashes. But then since I don't do photography for a living it's hard to justify hundreds of dollars for a flash when I could use the same money on lenses. Fortunately I came across this Yongnuo trigger. It's pretty easy to use. Fresh out of the box I was able to test shoot it already. Didn't really have to read the manual. Now I can finally enjoy off camera flash although looking back I didn't really need 600ex-rt. Perhaps 580ex II would have sufficed. Anyway, now with a couple of hundred of dollars I could invest in two Yongnuo flashes and four triggers. At least that's the plan in my mind. =)
By Black Russian
December 25, 2017
This is 3rd time I'm buying these triggers. First I bought 2 pairs. Loved them! Bought 2 more pairs few months ago, and now bought 1 more pair. They all work! All the time! As a charm! Without any hiccups or misfires! Equally well with every of various strobes I accumulated over the ears (Canon's 420, 430, 580, 580-II, 600, Sigma, Vivitar, Yongnuo 568-II, and Neewer 680) Great design and build. Looks (and in practice IS!) very durable. I find them as reliable as Pocket Wizards for a fraction of wizards price. They even more reliable than non-TTL Cactus V5! 5 stars from guy who usually give very good products only 4 stars. 5 stars because it beat my initial expectation by miles, and continue not disappointing me every single time!
By Anthony M.
December 22, 2017
Just plain worked right out of the box, which was far more than I expected. The interface is simple and easy to use. I paired these with two Canon 430EXII and a YN-522C-TX on camera in a single group and was able to start shooting with remote control via the camera interface within 30 minutes (10 of which was finding 16 batteries [2 per YN622C, 4 per flash]). I really could not ask for more. I have yet to setup a high speed test to see if it can meet its performance specs. I will update when I do.
December 21, 2017
So I threw my Pixel King units in the trash shortly after these arrived. I have absolutely NOTHING BAD to say about these units. I have used them relentlessly for tens of thousands of clicks and have had zero failures or misfires. The added benefit of being able to have a flash on top of the camera trigger is an added benefit. the fact that the triggers speak HSS insures that I can use them outdoors for sporting events, and can even trick a standard studio strobe into operating in HSS mode. I can't say enough good things about these triggers. FOR CERTAIN - if you are considering Pixel Kings, STOP HERE. Buy the Yongnuo's and you will never regret it.
November 9, 2017
I am a professional photographer based in Virginia USA and have been using the Pocket Wizard Plus II for many years to trigger my Canon 580ex II's. I recently stumbled onto a review of the 622 on You Tube. I had been considering purchasing the Canon or Pocket wizard units to go full TTL but the price was prohibitive so I was excited to learn about the 622. Long story short, I ordered two of them. When I un-boxed them I found the quality to be excellent. The packaging was very good and the units were well protected. I used them in an executive portrait session at a country club recently and was very pleased with the results. I had one unit on camera and one in a Westcott 50" Apollo soft box set on manual. I controlled my output from the camera and it worked perfectly using my light meter to get exactly the exposure I needed without having to remove the translucent fabric on the front of the softbox as I had to do prior to using the 622s. In fact, I was so pleased, I ordered 2 more. I had another executive portrait session this week and used two 580ex's for main and fill lights I used manual settings again and used the camera menu to set my umbrella fill light one stop lower than the main light and the results were fabulous. I highly recommend this product and may even try the Flash Units made here so I can have controlled back-lighting.
By Mark Anthony L. Serrano
October 20, 2017
Even though the YN-622C is China-made, its build quality and packaging are superb! It's lightweight but solid. I ordered 2 pairs (for a total of 4). The good thing about these transceivers are they are both triggers and receivers! Hit the test button on any of these transceivers and it will fire the rest of them! I've tested the devices last night, since I just got them yesterday. I've attached these YN-622C on the following devices: * Canon 6D with 50mm 1.4 * YN-560 III flash * 2 Canon 430 EX II flash I was in a low-light room, lit by a single flourescent buld. I was suprised first of all by the AF-assist of the device! My previous setup was a Canon 90 EX flash for triggering and 2 Canon 430 EX II. My 6D, with its legendary low-light capability, are having a hard time focusing. But with the YN-622C, it's able to focus on a black background without a hitch! It's amazing. Now here comes the best part. As soon as I start capturing photos, it wireless triggered my other flashes without any issues, even at 180 degree range. Initially I had problems with my Canon 90 EX flash trigger. Apparently it can only trigger at a short distance and at a very limited angle (maybe 90 degrees). But the YN-622C has no problem triggering the flashes at any angle and range. I've also mounted the YN-622C on a Cheetah Qbox 24 softbox on a Manfrotto lightstand. It's kinda bulky and added height to the flash that it won't fit anymore the flash inside the softbox speed ring. So I had to position the flash at a 90 degree angle. And that turned out perfectly great (By the way I was using the 430 EX II flash). Also, I've mounted the YN-622C on Manfrotto lightstand with a Stroboframe using the YN 560 III. So far no problems. If could only return my 90 EX and 430 EX II. As a side note the YN-560 III is also a great device to pair with the YN-622C.
By Robb McKindles
September 17, 2017
the triggers work as good as my Pocket Wizards. I did have one of 4 stop working after only a couple uses, and UNFORTUNATELY, after TWO EMAILS to the company I ordered from here on Tomtop, I have not heard back from them. Very disappointed. I am a wedding photographer and had purchased these to test for the future and I'll certainly buy more, just not from this company. I sent an email via Tomtop and directly to the customer service email that Tomtop gave me, and have not heard a peep. I had every intention on purchasing more from this company, but forget it now... I sent the first email over a week ago and another two days ago and still nothing. sigh... The triggers are good. The only flaws are that the buttons are very sensitive and easy to change channels if not careful, and unless you are using a flash with a lock (Canon 580ex), it can be difficult to remove the flash as it's difficult to loosen the dial due to the position on the trigger. The positive note is that this means that my flash is not gonna come off, which is good.
September 15, 2017
It is simple, elegant and works every time. I was kind of mad when I saw an IR lamp on the front, thought that got sent the wrong device, one that worked by IR signals, just a confussion, it is a basic RADIO transiever with an added IR beam. Since most cameras don't include them any more, the IR beam it's a great addition, helps a TON with focus in low light. I leave the thing on my camera through a whole wedding even when not using flash, just in case i need the IR beam. Comparatively, this might be a litle cheaper in construction to the most popular brand models, not weather sealed for shure. But the design its good and controls are solid and simple. The only thing I complain about its the price. I know that the mayority of TTL transievers cost more than 100$ but they are all still a cheap plastic box with plain basic electronics, not much more complicated than a kids walkie talkie but still more expensive than a two way radio. Will buy more of these soon
By Raymond Brown
August 3, 2017
I use these triggers between a Canon 6D and the 600EXT-RT. I haven't even looked at the manual, I use my flash in manual mode - I can set the flash settings via my on board menu system in camera. Its like the trigger isn't even there or a consideration for me. I just turned them on and they worked, as if the flash was on camera. I will say that even though I have used them for about a year - my remote flash has always been within 20ft from me. So in that range - its been rock solid dependable. My second flash is a manual flash configured as an optical slave - a LumoPro LP180. In this configuration I only need 2 YN622's. One for the Camera, 1 for the Canon 600EXT-RT. The LumoPro LP180 fires when it sees the canon 600EXT fire. Perhaps when my flash skills increase I'll mess with the different options, but for me - in manual mode I am in complete control and I'm comfortable there.
July 27, 2017
Fully ETTL compatible. Complete remote control in ETTL and Manual modes (make all adjustments on your EOS Camera and all speedlites (groups or individual) follow. So seamless, effective and reliable, I have become converted to Yongnuo. Here's why: To achieve good off-camera strobe you could buy a 600EX-RT for $550 and then use your EOS camera to trigger it optically. That is a great option. OR... You could buy 2 Yongnuo YN 565EX II speedlites ($216 for 2 or $108 each) and 3 of these YN622C triggers ($127 for 3, or $44 each). So for $343, you could have 2 high quality, professional grade strobes and the capability to remotely control and trigger them, at distance, regardless of line of sight. To do this same setup using Canons and PocketWizard triggers would cost over $1,600. You can argue about quality and durability, but I smile every time I use my Yongnuo gear. It just works. Very happy camper here.
By Roy Ang
July 20, 2017
Back in the early days I got uber frustrated with the Pocket Wizard Flex system. The last straw was two brand new latest firmware transmitters with 10 brand new latest firmware receivers and a box (10) brand new 580EXII's and nothing was firing let alone consistently. Gave up on the kludgy socks and mounts "fixes"...switched to RadioPopper PX's. Damn expensive and cryptic interface...but they worked pretty consistently. BUT NOW...these kick butt. Bought 7 of them to push as many as 6 580EXII's and 1 as the master Sometimes using the pass through hot shoe feature on the master with both of my Canon 1DX's. Over the last two days - outside mid day, sunset, indoors with partial obstructions...fired off every time. Worked with older bodies, 1D4s, 5D (all gens) as well as a Canon SX40HS. Clustered 6 of the 580EXII's around the umbrella shaft in circular mounts in a big parabolic...worked perfect. Same setup with older 580EX's same consistent results. Super bang for buck...much easier to use than the RadioPopper PX's and way, way, way more consistent than the PW Flex debacle. Only weirdness...sometimes my cats and dog flashes (320EX and 430EX) will fire at full power. But I didn't spend a lot of time looking for a consistent pattern for the cause. I just adjusted flash exposure comp. The 90EX works as well as the 270's both I and II versions. Even an older 220EX. They use AA's...thank god no stupid, funky expensive not always available on location... CR this and CR that battery(s) Bottom line...glad I bought them. Absolutely NO regrets. The Radio Poppers are now relegated to the backup bag or the occasional crazy long distance maybe 5% of the time shoot.
July 8, 2017
I am using these triggers with Canon 6D and Canon Speedlite 430EXII Flash. Basically just add batteries, mount one on the hot shoe, one on the flash, turn them on, be sure you are using the same channel and group on both units, and you are good to go. You can adjust all of the Speedlite settings from the camera just as if the flash was actually mounted on the camera. It is easy to bump the channel and group buttons, but easy to reset. Eneloop batteries work well and hold their charge. Probably best to invest in a real battery charger, like the Lacrosse Technology AlphaPower for around $33 to keep your batteries working their best. Also a diffuser of choice for the flash unit. All in all a better choice than a cable and competitively priced for these sturdy units.
By p. david miller
June 14, 2017
These are fantastic flash triggers not just for the money but because they work incredibly well with my yongnuo YN568EX flashes. Two triggers with full ETTL, Multi Flash and HSS functionality with a working distance of 100m! The HSS works almost flawlessly with an occasional missed shot when the shutter doesn't quite sync correctly with my 5d mark 3. The triggers have 7 channels and three groups for varying flash output off camera. I use these with a Yongnuo YN-622 flash controller. I use six of these in two groups of three most of the time and I couldn't be happier with the performance. The controls are very intuitive aside from a couple of functions that require pressing and holding buttons. The battery life is excellent as well. The only downside is the hotshoe clamp doesn't secure the trigger as well as I would like. I had one of these fall off an off camera cold shoe with a flash attached onto a hard tile floor. It cost me a flash but the trigger survived. Fortunately the flashes are pretty cheap, but still...be careful if you buy these. Even with the clamping issue I recommend these triggers without reservation.
Hot Event More
Top Sellers More
Your question has been submitted successfully
Please activate your account first. We will resend the activation email to help you complete your registration.