WM200/300-XLR is an metal wireless microphone XLR transmitter, which is charged by AA batteries and support 48V phantom power output. It utilizes UHF wireless FM technology and LCD high-resolution lattice screen, multiple channels selection, and integrated into LCD(low cut filter), auto-scanning, auto IR channel-match, RF signal strength adjustment, MIC/LINE IN input dual selection, power monitoring at receiver end, sound pickup dynamic display, backlight adjustment and other functions, at the same time with strong shielding anti-noise performance, it's a high quality microphone transmitter to broadcasting level.
96-Channel Multiple Selections:
Multiple channels code-matching function can be used in multiple situations with multiple devices no interference.
Working Distance Up to 60m:
60m in open area, realizing smooth recording with no staccato to meet the needs of various long-distance recording.
Support 48V Phantom Power Output:
It can provide power for microphones that support 48V phantom input. It works longer than a microphone powered by a single mode.
Auto-scanning for Quick Channel Selection:
Unique auto-scanning function helps you quickly find the channel with the least interference greatly improving the stability of wireless transmission, convenient and fast.
Low Cut Filter Mode:
With low-cut function, it can effectively filter the noise of low-frequency part and make the sound quality more pure and perfect.
Auto IR Channel-Match:
Auto IR for channel matching. Simple and efficient.
Adjustable RF Signal Strength:
According to different recording requirements, we set different RF signal strength. When the working distance is short you can switch to high strength mode, reduce power consumption and enhance the duration ability; when working distance is long you can switch to high strength mode to improve the stability of long-distance use.
Audio Dynamic Display Bar:
Real-time volume monitoring can adjust the volume according to the recording requirements so that the volume can be corrected in time.
Lattice LCD Display & Metal Manufacturing:
Lattice LCD with high resolution low power display will hardly affect the whole sandby time, the icon and font on the screen are concise and clear, can real-time monitor the equipment operation status; The design of metal appearance with high quality at the same time but also greatly improve the anti-interference ability of the recording process. Do not have to worry about the interference of electronic signals.
Duration: 4 hours
Antenna: Metal shielding cases as antenna component
Stray Radiation: ＜-60dBc
Sound Delay: ＜20ms
Audio Distortion: ＜0.5%
Frequency Response : 20Hz~18KHz
Audio Input Socket: 3-pin XLR Socket
Phantom Power: 48±2V
Compatible Battery: AA batteries×2pcs (Batteries are not included)
Operating Temperature: 0℃ ~ +50℃
Storage Temperature: -20℃ ~ +60℃
Item Size: 11.48 * 6.24 * 3.43cm / 4.5 * 2.5 * 1.4inch
Package Size: 15 * 9 * 6.5cm / 5.9 * 3.5 * 2.6inch
Package Weight: 240g / 8.5oz
1 * CoMica WM200/300-XLR Wireless Microphone XLR Transmitter
1 * User Manual (English & Chinese)
1. In normal use, the transmitter should be more than 10 cm away from the receiver. When the transmitter is less than 10 cm, the signal receiving part of the receiver will take protective action to shut down the signal receiving, and the audio may be interrupted. This is a normal phenomenon;
2. When using auto IR sync,please stay within 30 meters,otherwise the signal may be too weak and the sync will not be successful;
3. The working distance will be affected by the surrounding environment,pleas keep the environment open without interference during usage;
4. When using this product in a short distance, it is recommended to set RF strength at ‘LOW’ to reduce the power consumption;
5. Please keep this product in dry environment;
6. Do not expose the device in rain or humid environment, otherwise there will be a danger of short circuit.