High quality directional microphone.
No battery required.
Integrated Rycote Lyre shock mounting.
Our lightest mic at only 73g.
Rugged reinforced ABS construction.
3.5mm mini-jack output.
Integrated cold-shoe mount with 3/8inch thread.
Clear, directional audio on the GO! The VideoMic GO is designed and made in Australia.
Compact and lightweight by design, the VideoMic Go delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.
The integrated Rycote Lyre shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.
Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.
Model: VideoMic Go
Acoustic Principle: Line Gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 0.50 inch
Polar Pattern: Super cardioid--picks up audio from the front and sides and rejects 150° to the rear
Address Type: End
Frequency Range: 100Hz-16kHz
Maximum SPL: 120dB SPL
Sensitivity: -35.0dB re 1 Volt/Pascal(17.80mV at 94dB SPL) +/- 2 dB at 1kHz
Equivalent Noise Level (A-weighted): 34dBA
Output Connection: Mini-jack/3.5mm output
Item Size: 16.7 * 7.9 * 7.3cm / 6.6 * 3.1 * 2.9inch (D * H * W)
Item Weight: 73g / 2.6oz
Package Size: 23.5 * 12.4 * 7.4cm / 9.3 * 4.9 * 2.9inch
Package Weight: 170g / 6oz
1 * Microphone with Integrated Rycote Lyre Suspension
1 * Foam Windshield
1 * 3.5mm Dual Mono Output Cable
1 * User Manual (English, German, French, Spanish, Italian, Chinese, Japanese, Korean)
What cameras don't support the VideoMic GO?
The VideoMic GO is extremely user-friendly as there's no switches or battery to worry about - just plug in and go.
It is compatible with the vast majority of camera
in the market.
While this is by no means a complete list, following is a list of cameras that we can confirm do not support the VideoMic GO. Please refer to the specifications of your particular camera for information on whether it supplies power via the microphone jack.
Not for Nikon D7000
Not for Canon T3/1100D
Not for Canon C100, C300, C500
Not for Canon VIXIA HFR500
Not for Canon VIXIA HFG20, HFG30
Not for Canon XA-10
Not for Canon Vixia G10
Not for Canon Legria HF G25