Godox Xpro-N TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system (e.g. camera flashes, outdoor flashes and studio flashes), but also can control for Nikon original flashes when using in combination with X1R-N receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger suits for Nikon series hotshoe-mounted cameras.
Built-in Godox 2.4G wireless X system & versatile using methods. As a wireless Godox flash trigger(for camera flash, outdoor flash and studio flash); As a wireless trigger for Nikon speedlites; As a wireless shutter release trigger; As a flash (without Godox X system) trigger with 2.5mm sync cord jack.
16 groups and 32 channels to wireless control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.
Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Only weights 80g for great portability. Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.
The flash trigger is compatible for Nikon series camera models: D5, D4, D60, D70S, D90, D100, D200; D300S, D300, D500, D610, D700, D750, D800; D810, D3100, D3200, D3300, D5000, D5100, D5200; D5300, D7000, D7100.
Compatible Cameras: For Nikon series cameras (i-TTL autoflash) Support for the cameras that have PC sync socket.
Power Supply: 2 * AA batteries (not included
TTL Autoflash: i-TTL
Manual Flash: Yes
Stroboscopic Flash: Yes
High-Speed Sync: Yes
Second-Curtain Sync: Yes
Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
Flash Exposure Lock: Yes
Focus Assist: Yes
Modeling Lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM Setting: Adjust the ZOOM value by the transmitter
TCM Function: Transform the TTL shooting value into the output value in the M mode
Firmware Upgrade: Upgrade through the Type-C USB port
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission Range (approx.): 0-100m
Built-in Wireless: 2.4G
Modulation Mode: MSK
Wireless ID: 01-99
Display: Large LCD panel, backlighting ON or OFF
Item Size: 9 * 5.8 * 5cm / 3.5 * 2.3 * 2in
Item Weight: 85g / 3oz
Package Size: 12.2 * 12.2 * 6.2cm / 3.5 * 2.4 * 2in
Package Weight: 168g / 5.9oz
1 * Godox Xpro-N Flash Trigger
1 * User Manual (English & Chinese)
Camera, flash and batteries are not included.