Price on the app only:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Questions & Answers
yes, it is almost fit every gorilla tripod and with another tripod made takes a 1/4" screw.
By Raimu Hoshino on April 26, 2018
I don’t know. I am not familiar with that product.
By H. Mandel on March 8, 2018
your tripod needs to have the option of removing the head... if it does its just a matter of screwing this one replacing the other... very straight forward.
By Frank N. on February 14, 2018
By Mike V. on January 21, 2018
You get what you pay for. The included plate is painted rather than anodized, and overall gives a flimsy and cheap impression. The head itself works but don't expect smooth and precise movements like for a head priced at 10-20x. Still, for the extremely low cost it's worth trying out. It's definitely usable. Perhaps th… see more You get what you pay for. The included plate is painted rather than anodized, and overall gives a flimsy and cheap impression. The head itself works but don't expect smooth and precise movements like for a head priced at 10-20x. Still, for the extremely low cost it's worth trying out. It's definitely usable. Perhaps there is enough sample variation that you might get a good one, in which case it's a steal. see less
By Lars on January 17, 2018
OK for the price. The rubber on the knobs will expand over time and slip, but a stronger grip or more glue will fix that. Im still using this fella on my second tripod - 3 years down the track.
By Marie on December 29, 2017
It will work with any tripod with matching screw thread. This is an excellent Ball head.
By Su G on September 1, 2017
All cameras work. Almost every single DSLR or smaller camera made takes a 1/4" screw.
By Afterhourshop on January 9, 2018
To accommodate righties and lefties. It might also enable some finer adjustments
By H. Mandel on June 5, 2017
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contactsopen this forum in full page
based on 388 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!Write a Customer Review
October 14, 2019
October 12, 2019
October 11, 2019
Very useful patella, you can see the quality of the finishes as soon as you have it in your hand, it is "heavy", at the limit of, when you have it in your hand, think of, "how well it is built" rather than "god, I'm going to put a brick on top of my tripod! " Recommended, be attentive because the price goes down and goes up a lot, it is easy to get it cheap. As for the operation, for those who do not know what it is, it is fundamentally an extra articulation that you attach to your tripod, giving the camera the possibility of placing it in practically any position for photography, and being able to create a smooth panorama for video ( although it is not thought in my opinion for it, it can be done and the movement is very smooth). I hope the comment is helpful.
October 11, 2019
Really surprising the quality of the patella, I bought it after reading the amount of good opinions about it, a very good patella. There is no other market with that value for money a robust construction on soft functional handling days and I am really happy with it. Of course if I had to buy another one I would repeat.
October 11, 2019
October 9, 2019
October 8, 2019
I have several labels of different brands, including brands that define themselves as "de gamna alta" or "professionals" and it has nothing to envy. It is robust, precise and smooth moving. When the block is perfectly rigid and even with heavy cameras, it does not move at all.
October 7, 2019
I recently acquired a new tripod to renew the basic and cheap tripod I had before and it was falling short with my Nikon D7100 and the Samyang 14mm 2.8. Unfortunately, the offer I bought did not have a kneecap, so after searching and reading opinions I decided on it. The truth is that I can not be happier, withstand excessively the weight, allows to frame smoothly and the panoramic movement is a joy that I did not even imagine, because my tripod of axes was going to "pull". In addition, I have not needed any adapter because it has a 3/8 "thread. Very happy with the purchase and more considering the price of the product compared to similar ones for this expensive hobby. The only negative that could be attributed to it would be the weight, but it doesn't seem excessive to me and it shows that the materials are good.
October 6, 2019
February 22, 2018
October 10, 2017
By Guillermo Navarro Cespedes
September 21, 2017
By A. Wright
July 17, 2017
June 20, 2017
This camera ball head is perfect for creating smooth shots for video of even to help steady your shots for your photographs! You cat go wrong at all for a ball head at this price, it dose what it says and dose it very well. This is perfect for creating cinematic shots as the ball head gives you freedom to get the angle you want while also keeping the shot steady. Would highly recommend!
By Jason Hankster
June 18, 2017
April 8, 2017
For the price, if you don't need a rock solid ball head that will hold a heavy camera setup at any angle, then this is a nice ball head that is reasonably smooth in operation and seems built quite well. It's unfair to compare this to my Really Right Stuff BH-40 head which is $300+, but to do so I'll say this one lacks the buttery smoothness and precision of the RRS head. More importantly however, if you twist the two opposed locking knobs down tightly, you can still move the platform with your hand....it will be very snug but movable nonetheless. With my RRS head, I observed the same thing after tightening down the twist lever to lock the ball. The difference is that upon observing I could still move the platform with my hand, it was still relatively easy to twist the lever of the RRS had to further tighten the clamping pressure on the ball until it was immovable. With the Andoer head, tightening down the two knobs enough to lock the position of the platform simply wasn't possible and one big reason is that the knurl on the knobs is provided by a rubber ring around the knob, that ring simply sliding once the knob is tightened to the limits of the friction fit between knob and rubber ring. If the head was more expensive, I'd probably not give it but 2 stars, maybe 3. But, at this price it's still a highly useful ball head if you know it's operating limits.
By Electronic Tech Geek
March 28, 2017
March 15, 2017
By Dick A
March 15, 2017
March 9, 2017
This is a quality heavy duty ball head. I got it to use with my lightweight Dolica monopod, but it's actually slightly heavier than the monopod at 13.2 oz or 0.825 lbs. I consider quick-plates almost a requirement for cameras so this is a good pro level ball head with the feature that can support my Canon 5D Mark III without issues. Just be aware that this is pretty solid and big at slightly over 4" in height in itself. The bottom female thread socket accepts most pro-level tripods that come with 3/8" mount so if you're planning to put this on top of a tripod/monopod with 1/4" thread, you'll need an adaptor such as Rock Steady SS Stainless Steel 1/4" to 3/8" Bushing Adapter/Tripod 50mm Diameter Desmond .
Top Sellers More>
Your question has been submitted successfully
Please activate your account first. We will resend the activation email to help you complete your registration.
OUR SITE RUNS OF COOKIES