10Gbps Transmission Speed.
M.2 NVME SSD enclosure features high-speed transmission channel to deliver 10Gbps transmission speed.
Ensures automatic sleep with no interaction, which is energy-saving and eco-friendly, to reduce the operating temperature of the hard disk.
U Disk-Like Size, Large Capacity.
Only 1/3 of the ordinary 2.5inch external hard disk, with large capacity up to 2TB and support M.2 M-Key SSD with size of 2230/2242/2260/2280mm.
JMS583 High-level Main Control.
M.2 to Type-C Gen2 10Gbps high-speed transmission and supports UASP protocol, trim instruction.
Aluminum Alloy Material.
Made of high quality aluminum alloy, to provide 360°protection to the hard drive, and to ensure its durability and resistance to spill, scratch and extrusion and good heat dissipation, and make it easier to carry.
Quadruple Performance Guarantee.
Multi-hole cooling copper bars deliver rapid heat dissipation and better performance. 4pcs Heat-dissipation silicone on both sides and the aluminum alloy casing ensure its wear resistance, and the multi-size SSD fixation holes allows to connect stably and reliably.
Internal Interface: M.2 M-key
Output Interface: USB3.1 Type-C
Supported SSD: 2230/2242/2260/2280, NVME Protocol M.2 SSD
Transmission Speed: USB3.1 GEN2 10Gbps (theoretical speed based on NVME protocol)
Supported Capacity: 2TB Max
Supported System: for Windows / Mac / Linux
Item Size: 104 * 29 * 10.2mm / 4.1 * 1.1 * 0.4inches
Item Weight: 38g / 1.3oz
1 Open the back cover by sliding backward.
2 Carefully lift the internal PCBA board out.
3 Insert the M.2 SSD into and install rear positioning screw.
4 Put the installed PCBA board into the enclosure and fasten the back cover and install rear screw.
1 * SSD Enclosure
1 * Screwdriver
2 * Cables
1 * Set of Screws