Colorful Battle AXE C.B150M-HD V20 motherboard support for LGA 1151 socket processor（TDP:95W) and dual channel DDR4 memory as equipped with 2 memory slots. Based for Intel B150 chipset delivers the great performance enchantment to system and ultimate scalability hardware expending.
Overload protection(precision components), Over voltage protection(mainboard), moisture proof(fiber circuit board), lightning protection(dual protection), high temperature protection(capacitance and low resistance transistor), electrostatic protection(ESD chipset protection).
Lightning Protection Technology
Add an independent network card in the onboard NIC to form the unique network isolation transformer chip, not only can enhance the signal, ensure smooth network, also has the function of over voltage protection and lightning protection.
USB 3.0 Port
Provides up to 5.0 Gbps theoretical data transmission rate and supports hot swap, besides backwards compatible with USB 2.0 standard for convenient connection of USB interface device.
Intelligent Restore Functions
Achieves one-key restore for the operating system, hard disk data and CMOS, and can repair viruses in seconds.
RTL8111H LAN 1000M provides a more stable and faster network transmission environment, and satisfy the need of high data throughput.
Whether it is CPU power supply sections or memory power all use military level ferrite inductors. Merit features Higher electrical resistance, lower working temperature, lower EMI electromagnetic interference, long service life, low frequency up to 5MHZ, and so on.
SATA 3 Interface
The 3th generation of the Serial ATA storage interface, Serial ATA 3.0 definition of data transfer rate can reach 6Gbps, can obtain higher breaking rate, more convenient and easy to use and has more potential for development.
PCI - E 3.0 specification data transfer rate will increase to 8GHz|8gt/s (initially expected 10GHz), and kepp backwards compatible with PCI-E 2.X/1.X, and still support 2.5GHz and 5GHz signal mechanism. Based on this, the one-way bandwidth of PCI-E 3.0 architecture single channel(X1) can approach to 1GB/s, and the two-way bandwidth of channel(X16) can be up to 32GB/s.
Adopts high-quality anti-static IC chips to show a better antistatic effect than traditional chip. Whether the rear panel interface (such as VGA, DVI, HD and LAN), or USB connection header, they all equipped with at least 2 anti-static chips, up to 20 anti-static chips all over the board, which to provide a better protection and reduce common static threats for CPU.
All-solid-state refers to the whole board with all solid-state capacitors. All solid-state capacitors features environmental protection, low resistance, stable high and low temperature, superior properties and high reliability.
Model: Battle AXE C.B150M-HD V20
CPU: Support for Intel LGA 1151 socket processor(TDP: 95W)
Chipset: For Intel B150
Graphics: 1 * PCI Express 3.0 X16 slot
Memory: 2 * DIMM slots, support DDR4 dual channel 2133MHz momory slot
SATA port: 4 * SATA3.0 6Gb/s ports
Board I/O: 1 * PS2 port, 2 * USB2.0 port, 4 * USB3.0 port, 1 * RJ45 LAN，3 * audio port(6-channel support), 1 * VGA port，1 * DVI port,1 * HD port, onboard：2 * 9-pin USB2.0 header, 1 * 19-pin USB3.0 header, 1 * 19-pin COM header
Expansion slots: 1 * PCI Express3.0 X16 slot, 2 * PCI Express X1 slot, 1 * M.2 slot
BIOS: 128M UEFI
Power management: Support S3, S4, S5 wakeup, PS2 mouse/keyboard wakeup, USB wakeup, support timing/incoming call boot, and LAN S5 wakeup
Hardware Monitor: CPU fan speed controlled，SYSTEM Fan speed monitoring, CPU temperature monitoring, System temperature monitoring，and voltage monitoring
LAN: RTL8111H 1000M LAN
Configuration: 225 * 185mm mATX
Other Features: Colorful Netlive4.0, PXE
Package size: 270 * 260 * 57mm / 10.63 * 10.23 * 2.24in (L * W * H)
Package weight: 770g / 1.697lb
1 * Motherboard
2 * SATA cables
1 * CD driver
1 * IO shield
1 * User manual(Chinese)