This is a wired laser bar code scanner which can decode very fast and accurate. Independent research and development of the laser scanning gun, has very good identification code screen, incomplete code, fuzzy code, etc., effectively make up for the laser scanning gun cannot very good identification screen size problems.
32-bit high-speed CPU.
Support RS232, USB and KB Interface.
Key life can reach ten million times.
Fast and continuous scanning can alleviate user fatigue.
650 nm laser aiming point make the scanning result much more accurate.
Up to IP54 industrial level ,waterproof , dustproof.
Support remote device updating.
Switching from handheld to auto sense mode.
Please read the operating manual carefully and observe all the warnings and notes strictly.
Color: Black / Yellow (Optional)
Material: ABS + PC
Light Source: 650 (visible laser)
Laser Power: 0.3MW
Scan Model: Single Line Bi-directional
Scan Speed: 300line/sec
Width of Scan: 30cm
Depth of Scan: 2-1000mm
Decode Capacity: UPC/EAN、UPC/EAN(include complement code), Code128, UCC/EAN128, Code39, Code 39Full ASCII, Code128Full ASCII, Codabar, Interleaved 2 of 5, Code93, MSI, Code11, ISBN, ISSN, China Post Code, etc.
Print Contrast: 20% minimum
Bit Error Rate: 1/20 million
Prompt Buzzer: indicator
Scan Model: Handheld / Auto-sense
Working Current: 85mA
Standby Current: 36mA
Laser Security: Accord with National Level 2 Laser Security Standards
EMC: CE & FCC DOC Compliance
Working Temperature: 0℃-45℃
Storage Temperature: -20℃-60℃
Humidity: Relative Humidity 5%-95% (Non-condensing)
Environment Luminance: Max.5,000 Lux (Flsorescence)
Anti-knock: 3.0m Fall to Cement
Length of the Cable: 1.8m / 70.9in
Scanner Size: Approx. 16 * 7 * 8.5cm / 6.3 * 2.7 * 3.3in
Scanner Weight: 151g / 5.3oz
Package Size: 17.5 * 11 * 8cm / 6.9 * 4.3 * 3.1in
Package Weight: 271g / 9.5oz
1 * Barcode Scanner
1 * USB Data Cable
1 * Clip
1 * User Manual (English)