[Sidewinder-X2 3D Printer]
DIY all-in-one structure, assemble with just few minutes. Large printing size 300x300x400mm/11.81x11.81x15.75in, provides more space for your creative platform. One-key switching between 100-240V wide voltage range is applicable for most countries and regions in the world.
[Fast Heating Platform & Intelligent Auto Leveling]
The tempered glass printing platform prints more smoothly and adheres well. The AC heat bed has good thermal conductivity and enables fast heating. It can be heated up to 110°C in two minutes. With matrix automatic bed levelling, intelligence, precise testing, the device supports dynamic leveling compensation.
[Resume Printing & Filament Detection]
Featuring the function of detecting filament run out/power interruption and resumption of printing, giving an alarm before filament run out; it is featured by continuing usability after power recovery.
Equipped with a volcano nozzle, the brand-new Titan extruder allows fast melting, smooth filament extrusion and permits high-precision printing that proves to be efficient and convenient.
[Synchronized dual Z-axis design]
Exclusive Z-axis coupler frees you from the problem of layer pattern, and gives the printing experience high sophistication and better quality.
[Extra Quiet to Operate & Print]
The ultra-quiet system, assisted by the exclusive ultra-quiet stepper driver, the machine operates at low decibels throughout the entire process, realizing quiet printing with sweet serenity.
45" oblique human-machine interaction interface, high-definition color touchscreen, simple and easy to understand operating interface, make the operator convenient and comfortable.
1kg/2.2lbs filament, 1.75mm diameter, suitable for most of 3D printers. (Tolerance: ±0.02mm)
Made of environmentally friendly PLA, non-toxic and odorless, biodegradable and safe for use.
Stronger toughness, good liquidity, row neatly and won't knot while using, convenient and enough for use.
Recommended printing temperature 190℃~210℃.
KINGROON PLA 3D Printer Filament Vacuumed Sealed with Desiccant.
Model: Sidewinder-X2 (SW-X2)
Build Volume: 300 x 300 x 400 mm/11.81 x 11.81 x 15.75 in
Layer Resolution: 0.1mm–0.35mm
Build Speed: 60mm/s–150mm/s
Travel Speed: 250mm/s
Print Surface: Glass-Ceramic
Heat Bed Type: AC heat bed
Number of Extruders: 1
Filament Diameter: 1.75mm
Supported Materials: PLA, ABS, Flexible PLA, Wood, PVA, HIPS
Frame: Aluminum Extrusion
Print Technology: FFF (Fused Filament Fabrication)
Feeder Type: Titan Direct Drive Extruder
XYZ Resolution: 0.05mm, 0.05mm, 0.1mm
Nozzle Type: Volcano
Nozzle Diameter: 0.4mm
Nozzle Temperature: 180℃ – 240℃
Nozzle Heat Up Time: <3 minutes
Build plate heat up time: 80C in Less Than 2 Minutes
Operating Sound: <70dBA
Power Consumption: 100–240V 700W max (w/ Heated Bed Turned On)
Control Board: Artillery Ruby 32bit
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Maximum Build Plate Temperature: 130˚C
Connectivity: USB, TF Card, USB Stick
Screen Size: 65 x 52mm
Product Weight: 12.9KG
Product Dimensions: 550 x 405 x 640 mm/21.65 x 15.94 x 25.20 in
Product Name: PLA
Net weight: 1kg
Printer Temperature: 190~210℃
Hot Bed Temp: 80~120℃
Print Speed: 40-50mm/s
Water absorption: 0.5%
Tensile strength: ≥60Mpa
Flexural modulus: ≥60Mpa
Elongation at break: ≥3.0%
1 x 3D Printer Kit
1 x Tools Kits
1 x Filament Spool