Features:
10W laser Beam Shaping Technology: The S10 laser output power is increased to 10W, which is twice that of the S9. But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities.
Powerful High-speed Air Assist: Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency.
Industrial-grade Cutting Accuracy: S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear.
More Advanced and Upgradable 32-bit Motherboard: The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.
Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs.
Detachable Laser Shield & Safe Design: Equipped with a detachable eye shield, which will not dazzle even without glasses. And if you don't need it, you can easily disassemble the eye shield. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. And the free A4 size steel pad can protect the table from laser damage, isolate fire hazards.
Quickly Installation: By replacing the frame shafts of SCULPFUN S10, it can quickly obtain a huge engraving area of 410x940mm（226% area of standard Sculpfun S10）. Meet the needs of large-area engraving users.
Reserved Holes for Limit Switches: Limit switch holes are reserved on the extended Y-axis of Sculpfun S10 (limit switch mounting holes are also reserved on X-axis of Sculpfun S10), which you could buy inexpensive limit switches accessories to upgrade the limit switch or laser homing function.
Easy to Use: The extension shaft is standardized processing, it can be directly assembled on engraving machine without any other additional processing. There are other necessary accessories in the product list, including extension cables, belts, and screws. No need to purchase any additional accessories.
High-precision Production and Quality: The extension shaft and cable have undergone rigorous testing, so that it keeps the same accuracy and stability as the compatible engraving machine. Guarantee high-quality engraving and cutting.
Necessary Accessories for Laser Cutting: With this accessory to cut wood, acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work. 400x400mm working area is suitable for most popular laser engraving machines, maximize the cutting area.
Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Easier to judge whether cutting through. You don’t need to calculate the number of cuts, just keep repeating cutting until the bottom glows, which means the material has been cut through.
Safe Metal Desktop Protection Board: All made of metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness. And equipped with a metal desktop protection board, which can protect the table from laser damage.
Square Measuring Ruler: X-axis and Y-axis contain precise scale lines to form a right-angle measuring ruler, which is convenient for you to measure the size of cutting objects quickly.
Wide Compatibility: Compatible with various mature laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.
Specification:
Model: S10
Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy)
Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm)
Laser Wavelength: 455±5nm
Engraving Accuracy: 0.01mm
Engraving Area Size: 410x400mm
Focusing Method: Fixed Focus + Sliding Device
Laser Protection Cover: Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover
Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption)
Engraving/Cutting Materials:
Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone
Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards
Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE
Support System: Support MAC, Windows System
Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats
Data Transfer Method: USB Connection
Power Input: 100-240V AC, 50/60hz; Output: 12V 5A
Product Weight: 3.42kg
Model: SCULPFUN
For: Sculpfun S10
Engraving Enlargement Size: 410x940mm
Material: High-strength Steel
Product Size: 400x400mm
Product Thickness: 22mm
Diameter of Honeycomb Mesh: 9mm
Notes:
●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.
Packing List:
1 x X-Axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x S10 Laser
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
3 x Tool Bag
1 x Laser Goggles
1 x Test Wood Board
1 x A4 Size Metal Pad
Step 1-6 Install The Package
1 x User Manual
2 x Y-axis Extension Shaft
1 x extension Cable
4 x 130cm Extension Belt
4 x T Type Screw Assembly
1 x Installation Manual
1 x SCULPFUN honeycomb panel
1 x 400x400mm metal desktop protection board
