Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Q & A
A Yes,set up for lipo and nimh,But if you need diy settings,ni need buy a ESC Programming Card Buy link:http://www.tomtop.com/multicopter-electronic-parts-1191/p-rm5861.html
A No need a programmer.Parameters have been set up
Have had some issues with on/off switch.
By Shawn J. on April 20, 2018
It's not a bad brushless system. But it has its moments it sometimes dose not want to work at all especially when it gets wet or submerged in water it has to sit for a little bit to dry out.
By Randy on April 18, 2018
Don't know this is my first 1 I guessing if the right set up you ,ight get 70 to 80 mph with it I ordered 3650 4300 kv it is capable of 50.000 max kv 900 watts max
By wayne on April 5, 2018
I haven't received my product yet but most hobby shops carry plugs to convert over. You could also solder on a Traxxas plug.
By Shawn J. on March 17, 2018
No don't exceed 13 volt 3s max
By Belve K Riley on October 26, 2017
Yes I will and the motor and esc are great and reliable. You will love it in your rb6.6 for sure.
By Josh Elliott on October 18, 2017
Yes very easy installation and works great!
By Mallari on October 10, 2017
It would however the kv rating on this is a bit high. Not too high but I'd probably look for a motor/esc combo with a motor of 3000kv to 3800kv rating. And an esc capable of 3s.
By Brent F. on October 5, 2017
It might be to big for a 1/18 scale. The motor is 36mm in diameter and 50mm long. So if you have space for it, go for it. Should be crazy fast if it fits.
By Bradley on September 26, 2017
Yes it will accept the Traxxas gears. As a matter of fact it will accept both
By Robert on September 16, 2017
に基づいて 119 お客様の評価
May 12, 2018
April 20, 2018
April 9, 2018
March 7, 2018
February 27, 2018
February 24, 2018
January 25, 2018
January 12, 2018
January 2, 2018
December 29, 2017
December 19, 2017
December 16, 2017
December 14, 2017
September 12, 2017
September 5, 2017
July 27, 2017
July 27, 2017
July 23, 2017
July 3, 2017
April 8, 2017