Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Q & A
In the menu you can select which model of air plane or drone you have which will change the control characteristics. Read it in the manual.
By Amazon Customer on May 22, 2017
You have to power up the reciever and then bind!
By Michael Burns on May 11, 2018
Yes, you can set up elevons and other mixes right from the transmitter. The menu was a little tricky first time, but it saved my settings and worked fine. Mine came with a 6ch receiver.
By Papa Sings on May 1, 2018
Should work as long as is a 2.4 GHz
By stacy on April 24, 2018
You should have received a bind cable its a little wire loop with a servo conectoer on it on the quad itself there will be the reciver you have to plug the bind cable on to bind it to the transmitter
By smitte on April 19, 2018
Sure, I don't see why not. As long as you read the manual, and know where to connect your servos you should have know problem. The format is set up for planes and helicopters but as long as you connect the servos properly you'll be fine. Just a little trial and error.
By justin Nagle on April 7, 2018
Yes it is compatible. I currently have the same setup and works great. You have to go Into the tx settings and turn on ppm for it to work
By Amazon Customer on April 5, 2018
No, the rx thats with it isn't ppm
By Amazon Customer on March 27, 2018
You're going to have to be more specific. RF is Radio Frequency, and this is a RF Transmitter. So I guess to answer your question, yes?
By Akmzero on March 15, 2018
Not sure what the question is? Sounds like a statement
By Mike on March 7, 2018
に基づいて 19 お客様の評価
By Victor F.
December 13, 2017
I understand that I am over my head in that this is my 1st ever RC anything and worse than that its a Nitro Heli. However determined to try it. I have studied the owners manual for two weeks now and I still cannot locate any information as to exactly what the upper switches specifically do as well as that the two outer switch labels are impossible to read as the dark printing exactly matches the dark on the painted parts. Through constant trying to figure them out I was able to finally assign SWB for throttle control. I CANNOT LOCATE any instructions of how to operate the four upper switches. Most of the instructions are much better than any other Chinese explanations that I have had trouble before with on other products which have issues in translating, however very dissapointed in this part.
By Jim H.
October 23, 2017
This is my first transmitter, bought for a 250mm racing drone. I haven't used anything other than the most basic features, but it paired with my receiver just fine and I haven't had any problems with range or signal strength. I've tried it with PWM with the drone and PPM with an Arduino project and had no issues with either mode. I chose 4 stars instead of 5 because although it works fine, it just feels cheap in my hands compared to other transmitters I've held. I realize that's not fair because it is, in fact, a cheap radio. Still, if I had it to do over again, I'd buy something like the Taranis X9D. It's 3x the price, but this is just one of those products where you get what you pay for.
January 15, 2018
Good Radio, nice and thin, very lightweight and does what it says on the tin. SADLY the "custom firmware" that everyone says is available out there, does not work with this radio. The software written to recognize the standard firmware versions does not recognize this custom firmware made by GoolRC, so no ten channels for us :( Otherwise a solid purchase for a basic radio.
January 7, 2018
November 16, 2017
November 7, 2017
By Janet Harris
October 23, 2017
October 20, 2017
Love this little charger! It's a bargain. I know there are other great chargers out there, but for the price and what it can do, it's well worth the money. I can charge any battery from a LiPo to NiMH, and from time to time a NiCad. It's great that they include everything in this now, including the power cord. A big thumbs up!
By Aliya Finlay
October 19, 2017
By Papa Sings
October 16, 2017
By Carmenza Golden
October 16, 2017
By A. Williams
October 12, 2017
October 11, 2017
October 6, 2017
By Matthew Trindade Lehrbaum
October 3, 2017
August 25, 2017
June 28, 2017
May 3, 2017
April 7, 2017