Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Q & A
DSP, digital signal processor, CMOS processor
By Collazo on March 18, 2018
i was wrong about one thing u asked the 3.6 mm on the back of the camera is right but they used the same picture for all the different lens sizes they sell. i hope this is helpful
By joseph c chester on March 6, 2018
By Chris F. on February 23, 2018
Yes it can
By james w sibley on February 7, 2018
You can get a power distribution board (they have mini ones ) or a bec. You just wire those straight to your battery
By Chris F. on January 30, 2018
It has a filter on the chip that needs to be removed first. It was difficult to remove.
By james w sibley on January 8, 2018
Not really the lens is attached to the metal body , the cmos sensor you can take out but without lens
By glenson oduber on December 7, 2017
By Jeremy R. on October 21, 2017
It is not paperweight
By Botichelli on September 2, 2017
By Pablo A. on August 9, 2017
に基づいて 8 お客様の評価
May 15, 2017
I got this to use as an FPV camera on my 250 racer quads. It worked right out of the box. I'm using an ImmersionRC Tx and the Fatshark Dominator 3 goggles. I guess this has more lines than the Fatshark HD camera I also have because it doesn't fill up the display on the goggles vertically. There are black areas similar to watching letterbox movies on a regular TV. But the Andoer camera fills the display nicely. The 2.1mm lens does a great job of gathering a wide view, which is necessary for tilted angle mount. The only problem is that it needs to be removed from the enclosure to fit inside the protected front area of the quad. But that of mod work is just part of the hobby. :)
December 14, 2017
November 20, 2017
By Casey S.
November 15, 2017
November 14, 2017
September 16, 2017
August 26, 2017
April 16, 2017