Preferiti

Mouse sopra per ingrandire

10A 110V digitale temperatura Controller termocoppia -58 ~ 194 Fahrenheit con sensore

10A 110V digitale temperatura Controller termocoppia -58 ~ 194 Fahrenheit con sensore

Il prezzo su App solo:

Hai gia' avuto APP di TOMTOP

Comprasi il prodotto direttamente con il codice promozionale!

Note: Aggiorna TOMTOP App all'ultima versione per favore.

Non hai APP di TOMTOP 

Caricare liberamente e Godere l'offerta di piu'

Spedizione Da:
  • Magazzino della Cina
  • Stati Uniti d'America magazzino
  • Il magazzino del Regno Unito
Si prega di selezionare un magazzino
InVia:
Di solito saranno spediti in giorni lavorativi ore
spedizione:
la richiesta non riuscita! per favore, prova di nuovo.
scusa, sembra che non ci siano disponibili metodi di navigazione per la tua posizione.per favore contattateci per ulteriore assistenza.

IL carico...

Spedire a

United States
Magazzino in: china
Quantità:

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!

Email:

Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice
Aggiungi ai Preferiti

Protezione dell'acquirente

  • Rimborso completoSe non ricevi il tuo ordine
  • Rimborso totale o parziale , Se l'articolo non è come descritto Per saperne di più >
Caratteristiche:
un regolatore di temperatura mini.
con ampio e chiaro display a LED per una migliore leggibilità.
ampia temperatura campo di misura.
riscaldamento e raffreddamento di controllo. funzione di calibrazione temperatura
. funzione di protezione di ritardo
.
tutti i parametri impostabili per impostazione predefinita dopo il corto circuito.
può essere utilizzato per congelatore domestico, serbatoi d'acqua, Frigorifero, chiller industriali, caldaia, vapore, attrezzature industriali e altri sistemi di controllo della temperatura.

specifiche:
tensione di funzionamento: 110V ± 10%
corrente nominale: 10A
consumi:
≤3W campo di misura: -58 ~ 194 Fahrenheit
precisione di misura: 0.1 gradi Fahrenheit
errore di misura: ± 1 Fahrenheit
gamma di controllo: -58 ~ 194 Fahrenheit
precisione di controllo: 1 Fahrenheit
temperatura di lavoro: -30 ~ 150Fahrenheit
sensore di temperatura: NTC 77 gradi Fahrenheit = 10 K B3435
dimensione dell'oggetto: 8.5 * 7.5 * 3.5 cm / 3.4 * 3 * 1.4 in
peso dell'oggetto :
160g/5,6 once dimensioni del pacco: 11 * 8.5 * 4.3 cm / 4.3 * 3.4 * 1.7 in
peso del pacchetto: 194 g/6,8 oz

pacchetto include:
1 * termoregolatore
1 *
sensore di temperatura 1 * manuale di istruzioni

Sorta:
5
Q

What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected… see more What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected to a jumper wire joining Port 1 and Port 3 and the white neutral wire connected to Port 4. I have checked my wiring for this unit and it agrees with other sources on the internet. By the way, I tested the unit without the female receptacle wiring by connecting the power cord black wire to Port 3 and the power cord white wire to Port 4 and the unit then did power up with proper lights displayed. The unit only fails to power up when the female receptacle (load) is connected. see less What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected… see more What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected to a jumper wire joining Port 1 and Port 3 and the white neutral wire connected to Port 4. I have checked my wiring for this unit and it agrees with other sources on the internet. By the way, I tested the unit without the female receptacle wiring by connecting the power cord black wire to Port 3 and the power cord white wire to Port 4 and the unit then did power up with proper lights displayed. The unit only fails to power up when the female receptacle (load) is connected. see less What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected to a jumper wire joining Port 1 and Port 3 and the white neutral wire connected to Port 4. I have checked my wiring for this unit and it agrees with other sources on the internet. By the way, I tested the unit without the female receptacle wiring by connecting the power cord black wire to Port 3 and the power cord white wire to Port 4 and the unit then did power up with proper lights displayed. The unit only fails to power up when the female receptacle (load) is connected. What's wrong with this wiring scheme? There are no lights on when the unit is wired to power cord and to female receptacle (load). For the power cord, I have the black (hot) wire connected to Port 2 and the white (neutral) wire connected to Port 4. For the female receptacle (load), I have the black (hot) wire connected to a jumper wire joining Port 1 and Port 3 and the white neutral wire connected to Port 4. I have checked my wiring for this unit and it agrees with other sources on the internet. By the way, I tested the unit without the female receptacle wiring by connecting the power cord black wire to Port 3 and the power cord white wire to Port 4 and the unit then did power up with proper lights displayed. The unit only fails to power up when the female receptacle (load) is connected.

A
  • Your power goes to the center connections #3 & #4 your sensor goes to #5 & #6 the load (whatever your using it for) goes to #1 & #2. There is no polarity so it don't matter which way you hook it up. The only thing on you load hook up #1 & #2 you should run the hot wire side through them. Good Luck Max ( I see clchoice… see more Your power goes to the center connections #3 & #4 your sensor goes to #5 & #6 the load (whatever your using it for) goes to #1 & #2. There is no polarity so it don't matter which way you hook it up. The only thing on you load hook up #1 & #2 you should run the hot wire side through them. Good Luck Max ( I see clchoice gave you the same lay out) see less

    By max brenneman on April 30, 2018

(3)
4
Q

Does this maintain your program settings if unplugged or after power failure or does it have to be reprogrammed every time unplugged power goes out

A
  • Yes, I left it unplugged overnight and the settings remained.

    By Tissman on March 20, 2018

(2)
3
Q

I bought a better thermo coupler for this unit. Its a Type K. When I hooked it up it showed a HHH on the screen. Is the type K the wrong type

A
  • This uses a NTC thermistor (measuring resistance) and is not compatible with a thermocouple (measuring voltage).

    By Chris Walker on April 28, 2018

(2)
3
Q

Can I hook this up to a fridge to maintain a 64 degree F while maintaining the freezer at its normal temps?

A
  • It would depend on your refrigerator. Most refrigerators are cooled from a single compressor and coil system. Some have one compressor and two coils. You would need at least this dual-coil setup. The wiring hack would be very tricky and discouraged for a DIYer. These kinds of fridges are already expensive and messing … see more It would depend on your refrigerator. Most refrigerators are cooled from a single compressor and coil system. Some have one compressor and two coils. You would need at least this dual-coil setup. The wiring hack would be very tricky and discouraged for a DIYer. These kinds of fridges are already expensive and messing with the wiring would void the warranty and possibly destroy the machine. Probably easier and safer to get a dedicated fridge and freezer for each purpose you need. They come in all shapes and sizes, so space really wouldn't be a problem. see less

    By DIY Hero on July 16, 2017

(1)
1
Q

In programing the 1st is HC. heat/cool but what do the other programs CA, PV, HA, LA & CP stand for?

A
  • Temperature range for activating controller. Default is 2 deg F and it can be set between 1 and 30 deg F. It is meant to prevent over-cycling.

    By Kman on April 19, 2018

(6)
1
Q

Can the sensor be immersed in water?

A
  • The sensor appears potted quite well. For severe duty it may be placed in a well.

    By Ed Lenk on February 15, 2018

(7)
1
Q

Mine just arrived and I'm curious about how to best mount this in my wall for a permanent installation. Are the orange clips a mounting bracket?

A
  • They are for mounting into a rack.

    By L. Tate on October 18, 2017

(2)
0
Q

info says 10 amps is that the maximum you can power with it? ... could i use it to power heat tape that is 20w

A
  • I'm using mine to control a 125 watt heat lamp so I would say yes, a 20watt heat strip would be well within the rated specs.

    By usmillers on May 2, 2018

(3)
0
Q

I want to use this to control my herms system. But i use 24v dc gas valves. will this work?

A
  • You are probably looking for a analog temperature controller for your system. This controler does on /off only and has a control band of a couple degrees. Not suitable for your application

    By Bob on April 14, 2018

(2)
0
Q

is the probe water proof so it can be used in a aquarium

A
  • The probe is potted, but I don't think it looks like a probe designed for submersion. It is however a standard 10kohm NTC element which can be easily replaced with a waterproof version. I added extension wires to my probes to increase the measuring distance beyond 1 meter. There is also a calibration adjustment if necessary.

    By J. Stuart on April 11, 2018

Discussioni

Invia nuovo argomento Rispondi all'argomento

Si prega di notare che TOMTOP Forum è una comunità per lo scambio di idee e l'aiuto alla ricerca, durante la quale gli entusiasti tecnici parteciperanno alla discussione, nel frattempo, il servizio clienti TOMTOP (con l'icona del servizio clienti di TomTop) risponderà tempestivamente, con la stessa funzione del contatto su http : //www.tomtop.com/contacts

apri questo forum in tutta la pagina
Recensioni dei Clienti

Voto medio:

4.3

sulla base di 185 Recensioni dei Clienti

  • 5 stelle
    13%
  • 4 stelle
    86%
  • 3 stelle
    1%
  • 2 stelle
  • 1 stelle

Condividi la tua opinione con gli altri clienti e ottenieni TOMTOP punti, i primi 5 recensioni ottengono DOPPIO TOMTOP Punti!

Scrivi una Recensione di Cliente
  • By New Quilter

    December 21, 2017

    I bought this for a chest freezer to fridge modification which did an amazing job of dropping the power consumption for a solar application. I was impressed enough that I actually bought another as a backup. The instructions suck and actually say not to install "in the place where is dripping water, or the elderly, children could be touched" which can be interpreted many ways. The laughing from reading the instructions however inspired me to do some Google searching and the info I needed came up fairly quickly. Programming took a little effort but was easy after, remembers the setting if power is lost and the fact that it displays in F in a huge plus to me!

    Is this helpful? (0) (0)

  • By C. M. Garvey

    December 20, 2017

    I bought this to be the temperature controller for a sous vide setup. It works and has some nice controls, but they're a little hard to understand. The instructions are pretty hard to understand as they're obviously translated from Chinese, but it's not a deal breaker. If you'd like to make your own sous vide device, check out instructables and search for "Sous vide cooker for less than $40." If you view those instructions, they use a temperature controller that is ONLY for heating. This unit works for both heating and cooling but it's easy to change in the settings. This is the 2nd sous vide temp controller I've built and this is easier than the Ellitech one, and it's cheaper. I'm building a 3rd one to hook up to an old commercial fridge to keep it from getting too cold. It should work just fine for that after I get the next one and it will be wired up the same way. The ellitech one I had to figure out how to wire. Not impossible, but this unit is wired exactly the same as the instructables instructions.

    Is this helpful? (0) (0)

  • By joe

    December 16, 2016

    So far so good! Received it in a decent time. Just came in its own little box with a little bubble wrap. The unit its self works well. The therm-couple respond quickly to any temp change. I am using this on a hot tub. The thermostat in our California Cooperage heater is getting really bad. The system is the original round cedar hot tubs from CC and the analogue thermostat kicks in around 96 degrees and cuts out at 110 degrees! We want 104... So I took a dremel tool to a small area of the brass heat exchanger and used 2 part pool epoxy to hold the therm-couple to the polished brass. Its awesome. The temp response is instant. Add a tad bit of cold water and the temp drops quick, shut the cold water off and the temp quickly rises back to the pump return water temp. I like the fact that you can set the temp swing. I have it set a 2 degrees and calibrated the temp reading to say 104 when the tub 104.5. So 102.5 ish the heater cuts in and 104.5 ish the heater cuts out. Very comfortable temp range and keep the heater from short cycling. To control the heater I am using the relay to switch the static gas valve trigger wire.

    Is this helpful? (1) (0)

  • By M. Kelley

    February 9, 2016

    It can act as a heater controller or cooler controller but not at the same time. There is only one relay connection, so you can either hook up a cooler or a heater and program it to switch on the heater or cooler by temp. Other products have two relays so you can switch on a cooler if the temp gets too high or a heater if it gets too low. 2. Programming is too tedious. It requires a separate button press for each 0.1 degree of change in the temperature setting. The other one would quickly scroll up or down the temp settings as long as the programming button was held down. 3. Instructions are incomprehensible Chineseglish. Thank goodness there were some drawings. Even the marlins for the connections on the unit were in Chinese characters. Other than that, it does work, and since I mostly need to switch a refrigerator on and off, the single function will work for me.

    Is this helpful? (0) (0)

  • By d***6

    June 11, 2018

    Fast shipping. Thank you very much !!!!!!!!!!!++++++

    Is this helpful? (0) (0)

  • By t***y

    February 11, 2018

    As advertised

    Is this helpful? (0) (0)

  • By D***p

    December 27, 2017

    Excellent product. Package arrived quickly. Works like a charm.

    Is this helpful? (0) (0)

  • By e***4

    December 13, 2017

    good communications and as described thanks

    Is this helpful? (0) (0)

  • By Eugene Faith

    November 30, 2017

    Very reasonably priced and effective unit after 1 week in full use. The instructions are written in brutally fractured English, but after about 15 minutes I was able to decipher them pretty well., but by going to one of the brewers boards, I was able to find a video setting up one from another company, and figuring out the rest was not hard.

    Is this helpful? (0) (0)

  • By c***1

    April 22, 2017

    Compact and easy to use. Will buy again!

    Is this helpful? (0) (0)

  • By l***w

    September 13, 2015

    Fast shipping High quality part. Good value. Highly recommend seller.

    Is this helpful? (0) (0)

  • By k***y

    September 12, 2015

    Arrived fast, great condition! Thank you!

    Is this helpful? (0) (0)

  • By s***k

    August 28, 2015

    Good Deal! Fast Delivery! AAA++++

    Is this helpful? (0) (0)

  • By s***4

    August 28, 2015

    Thanks

    Is this helpful? (0) (0)

  • By d***r

    July 26, 2015

    Great seller! A ++++ fast shiping ! Thank You !

    Is this helpful? (0) (0)

  • By e***a

    May 5, 2015

    Thank you, very fast shipping! A++++++ Would buy from again

    Is this helpful? (0) (0)

  • By t***t

    April 29, 2015

    I JUST GOT IT

    Is this helpful? (0) (0)

  • By f***y

    April 29, 2015

    Thank you

    Is this helpful? (0) (0)

  • By t***3

    April 13, 2015

    Its alright

    Is this helpful? (0) (0)

  • By t***g

    October 18, 2014

    Excellent E-Bayer Exactly as Described

    Is this helpful? (0) (0)

Evento Popolato Di più

I più Venduti Di più

Si prega di attivare la tua e-mail di registrazione. Se unreceived clic sul pulsante qui sotto

Recently Viewed

IL NOSTRO SITO FUNZIONA DEI COOKIE

TOMTOP utilizza i cookie per offrirti la migliore esperienza di acquisto. Se continui a utilizzare i nostri servizi o crei un nuovo account, assumeremo che accetti la nostra Politica sulla riservatezza.