Prix uniquement sur l'application:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
I just used these last weekend for a wedding. I assumed they would work just like they did on my D700 but THEY DO NOT. SOMETIMES they fire and most of the time they do NOT. I used a D750 with Lumopro LP180 flash units.
By Mr Robot on May 11, 2018
Yes Thank you
By Dorsey on November 20, 2017
By Douglas Nelson Ganyo on July 2, 2018
I purchased this to pair with my Nikon D610. I researched the product itself to see if it was compatible. Maybe check that first? I'm not sure. :(
By Portia on May 20, 2018
Yes Thank you
By Cameron on May 15, 2018
I believe that the YN-622N trigger are made for Nikon. I have tried them on Canon but they do not work. Not sure they will work for Metz.
By Brooklyn Born on May 13, 2018
I've tried it at 30 feet away and works fine. Some people tried it over 50 feet and works fine too.
By Chris of VA on May 9, 2018
Hi Solitude, our YN622N-KIT is absolutely compatible with YN568EX N.
By López on May 11, 2018
sorry not sure
By Montagna on May 9, 2018
Yes, the 685 is compatible with the 622 Yongnuo system
By Mayu Fujimori on May 14, 2018
Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contactsouvrez ce forum en pleine page
basé sur 297 Avis des clients
Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!Écrire un avis de client
By Robert B.
December 20, 2017
Flawless operation. Exactly what I needed. Once you get familiar with the operation they are simple to use, and produce great results if you understand the use of off camera flash systems. These are primarily for outdoor on location shoots, I have three SB700 flashes. I'm seriously considering the new Yongnuo flash as an addition, since the wireless is built in, but mixed reviews are cause for some concern, however if you need wireless control of any Nikon compatible flash, these units are just the ticket. I've used Godox and Pocket Wizard before, but these are far simpler and functionally more flexible. I'm using a D7200, D610 and 3 flash combo, so your mileage may vary, it may be camera/flash dependent, but so far, I'm very impressed. I won't be returning them, but I may get version two of the transceivers soon, just for USB and feature set. I'm sure I can pass these on to friends who want to learn the use of external flashes. 5 out of 5 stars!
By Jerry Palmerino Jr
December 20, 2017
I bought these triggers as soon as I realized I needed High Speed Sync with my Nikon DSLR. I normally use Pocketwizard Plus X triggers, but they do not provide the capability to do HSS (High Speed Sync). These do and they are perfect. So far in my use, they have fired every time (but...see my note below). They are also simple to use. I watched some online videos for them that made everything perfectly clear. By the way, there are some options if you do not want to use HSS. A neutral density filter is one option. Note: The one thing I could not get these to do was utilize HSS with my manual Yongnuo flash. I am not sure if it was because it was a manual flash or not. They worked great with my Nikon flash though.
November 20, 2017
This item did performed very well when as it described.I used at a fashion show and at my kid concert,indoor outdoor at far range it manage to work even in sunny noon light or Nikon cls system have failed.I bought to pair of The Yongnuo YN-622N trigger.It 's very easy to use it,I insert the battery choose Channel and group for each reciever they worked like a charm.The only downside is the Test mode where I lost it a bit not sure why I get 2 out of 3 working.The Yongnuo does perfomed well also at Hight Speed Sync. I tested at shutter speed of 1/500,1/1000*,1/2000* sec(*images background under-exposed) the batteries still work after 4 weeks intense use all I just had to worry was the flashes battery.All possible combination in flash mode (M,I-TLL,A,S) and the Yongnuo does automatic swicth from reciever to transmitter depends where you locate it (Plug in camera Hot shoe -->Transmitter...Off hot shoe connector it acts as a reciever) I would recommended this to anyone looking for far range transmitter/reciever for price and features Vs Pockets Wizard
November 17, 2017
I've done some preliminary i-TTL tests with my Nikon SB-600's and as a simple trigger for my Metz 60 CT-1 strobes. So far, good, but... Clearly, the practical way to use these units is with a Nikon SB-910 flash on-camera, as a master controller. I don't have one, but found a nice youtube video which showed how easy it is to set levels on the remote flashes with an SB-910. Without one, you get no visual feedback about levels, and too many non-intuitive button presses are needed to balance things. The Commander Mode menu on my D-600 is cumbersome to use, so I don't. Not much different from Pocket Wizards, so this isn't a complaint. My point: expect to pony up another $500 for an SB-910 if you really want usable i-TTL control of remote flashes. UPDATE: My first serious use was a failure, but it was cockpit error on my part. It's very easy to press a YN-622N button inadvertently, and I apparently did that at the gig. Re-testing later, I found these units to work properly. My advice: work with them a lot before relying on them. Good gear, but I wish they had a "lock" option once everything was set. PS: 4 stars, so far...
November 15, 2017
3 - 565EX TTL Speedlights = $320 3 - YN 622N Transceivers $120 1 - YN622-TX Controller = $50 Total: $490 1- Nikon SB910 = $546 Unless you are a hard-core professional who is going to be using a lighting set-up on an every day basis, then this is a speedlight and wireless system that will more-than-adequately suffice for almost any and all instances and applications --unless, of course, you want/need High Speed Sync (which is available with YN568 - $179). The quality and capability -- the bang for the buck -- of these speedlights and transceivers/controller are remarkable for the price. For the average user/advanced user on a budget, the YN565 is an excellent choice and should be sufficient for your lighting needs. The YN622 transceiver and YB622-N are the perfect, affordable combination for an off-camera TTL wireless system, in addition to offering complete manual control, as well.
By Matthew V Hnatov
November 8, 2017
Fantastic! As a novice flash portrait photographer (though I've been shooting landscape/nature and urban photography for decades) it took me less than a half hour of 'playing around' with them and a YouTube video to get up and running. I was asked to take portraits for our church directory and with this inexpensive kit, I got the job done to rave reviews. Simple 3 light set up, each flash controlled separately, a couple of cheap umprella and a grid for the hair light - Boom! Done! I'm a hero. Nikon equipment. D600. SB900, SB700, SB600 (all flashes bought second hand in NYC). You will need the controller.
November 8, 2017
I was looking for a wireless trigger to use in conjunction with my QUANTUM TRIO BASIC and both of my SB800 and the SU800. When I first got it I was not expecting to trigger my Quantum Trio Basic but I was wrong. I set up the unit on ITTL and the camera on TTL and shooting on Aperture priority using my Nikon d600. The flash trigger was set on channel1 and zoneA, the flash was set on fill flash the SU800 was set on TTL. The test shot was better than I expected the image was very clear and the YN622N was dead on. I am ordering two more units for the rest of my flashes. you do not have to take my word for it just try it and if you do not like it send it back. I will not buy the overpriced brand when this unit will do the same exact thing and even more. Again this is my opinion and my opinion only Good Luck I just bought two more unit because I was so happy with my previous purchase. If you own a quantum trio basic you will be able to use your flash off camera, if you do not own an SU800 get you one, you will be controlling the flash through the SU 800. I had to come back and update my post since I bought a second set of triggers.
November 7, 2017
I realized that I put this review up on the transmitters only, but I wanted to put it here too... I have been using these for a little bit - they work well. I hated all the guessing and checking for manual exposures, so I decided to get a light meter to take better control of my exposure. I'm using these with an YN-568EX. You have to run the 568EX in iTTL mode and use the transceiver to set the manual power. Here's the problem: in iTTL mode, the 568EX ALWAYS fires a pre-flash (even when the power is set manually from the 622N). So - the light meter sees the pre-flash. I'm not fast enough to catch the second flash with the meter, so I was stuck. If you search, for the Nikon system, there is some workaround using FV lock. There's another one using mirror-lock-up mode. Flash Havoc discusses this. But, I have a D5300, so neither of these options are available to me. I could try using a cord to sync, but that is cumbersome. So, here's the solution I found to balance manual off-camera flash and ambient with a light meter. We will separate the pre-flash from the regular flash, giving yourself time to only measure the regular flash: 1. Set your ambient exposure (without flash) how you like (over 1/200 sec, of course). Remember your shutter speed. 2. Program your light meter to your shutter speed and ISO settings for your ambient exposure. 3. Set your flash to rear-curtain sync. (This puts the real flash at the very end of your exposure) 4. Set your shutter speed to 1/2 seconds. (This separates the pre-flash and real flash - longer than 1/2 second doesn't work for some reason). 5. With any flash power, trigger an exposure. Take your flash meter reading off the second flash (the one at the end of the 1/2 second). 6. Make the recommended adjustments to your flash power based on the light meter reading. 7. Set the shutter speed back to what you determined at first. You might want to take your flash mode off of Rear Curtain sync. Take the shot. Congratulations - you should now have a balanced exposure based on your light meter. Of course, you might have to tweak a little bit to taste or based on the linear response of your flash. This is quite the process, but it's not terrible. To me, it's better than buying a new camera or pocket wizards and/or a new flash. A couple more tips: this flash/camera combo seems to work better at FEC (set on the camera) at -2.0. At -2.0 FEC, the pre-flash is equivalent to a 1/64 power manual setting. With this one piece of information, you can measure the pre-flash and make the adjustment based on what your meter suggests. But, to verify the actual flash, you need to do the procedure above.
By Enigma Networks
November 3, 2017
I have these on a NIKON SB910 and another on a YN560 III, they work great especially having the YN622 commander for the Nikon I am able to remote control the Nikon flash but not the YN as of now because it doesn't have TTL or such. Although now recently the YN 560 TX has been release where you can control your YN560III remotely which is WOW! cheap and great setup. I could have purchased 4 YN 560 III for the price of a SB 910 Nikon and use a YN 560 TX in that price to control all 4, because they have built-in transmitter. This is off-topic and I am stuck with the YN-622N and the YN-622N TX which work great with any flash but if I would have waited a little I might have purchased differently. These are highly rated but if you are reading this re-think on why you buying these and what you are using them for. My ideal setup would have been now using a 4 Way Flash Bracket inside a soft-box instead of a strobe, one outside and maybe another behind depends on what you shoot and how.... You can control all from one location/on camera controller. You can easily pack these flashes vs some huge studio strobes that will cost you upwards of a thousand or more. Bottom line is you cannot ever have enough gear, carrying it is another story.
October 29, 2017
I had new a Pixel King Pro that didn't work with my Yongnuo 565EX flash, so I returned it. For about $40 less I got a pair of these triggers. I tested them with each of my flashes: Metz, Nikon SB700, and Yongnuo 565EX, and they worked flawlessly. The TTL worked fine, and after a few minutes I could adjust the flash compensation using the no-LCD interface. The interface for changing the settings is probably the worst part about these units. I wound up taking a gamble on a Debao SU-800 which provides CLS infrared interface with an easy LCD interface. I can slap that on these units for easier radio-remote control. Really slick. I have to say that Yongnuo has really improved in the last few years. I have some original Yongnuo manual flash and trigger units. They still work ok, but were really cheap and the flash wasn't reliable for power levels. The 565 and these triggers are world better than those units (which still work today). I've already purchased my second pare of these triggers. At some point, Yonguo is supposed to come out with a YN-622TX which will do what the Debao SU-800 does with these triggers. At that point I'll buy that because it will be compatible with these triggers. Overall, very happy with these units, and with the price. Worked the first time and every time as I expected.
By Oscar Pallares
October 29, 2017
I like to try gear so i buy and sell quite often, at first i was using cybersyncs and i loved them, never had a missfire, the only bad thing was the sync cables but you get use to em. so i switched to phottix odins and i like them too, really had no complains great equiptment and cheaper than pocket wizards. so i recently sold the phottix since i barely use ttl, the only advantage was being able to change flash power from my camera, at weddings in a reception hall not having to walk across the room to adjust is priceless but again once i set my power the change can be adjusted with iso or aperture in camera so good bye phottix. i was about to go back to cybersyncs and decided to try youngnuo since a couple of my friends are using their 603s and so far so good. so i got the 622n 4 of em and 1 of their flash 565ex and i had done 1 wedding, 1 esession and 3 family outdoor portraits and i have not had any miss fires or problems at all, pretty easy to use once you learn where the buttons are it is just like using your camera. they are a little too big for my taste but for the price and what they can do you just can't beat em. i use Nikon so i got the 622N. give this guys a try it is worth it specially if you don't have tons of cash, i don't. [...]
By NW MN Dad
October 25, 2017
I consider myself a high-end hobbiest/semi-pro photographer shooting mostly sports and perhaps a third portraiture. I picked up the off-camera flash bug about a year and a half ago, first picking up a Sunpak external flash followed over the course of the year by a Yongnuo YN-468ii at which time I discovered the possibilities with high speed sync flash. By this time, I had also acquired two pairs of the YN-603(?) wireless flash triggers, and after picking up a YN-568 EX speedlight capable of high speed sync soon realized I was limited in more ways than one with the Yongnuo 603 radio triggers, as those triggers don't offer TTL capability nor do they sync beyond 1/250 sec. That's all fine and dandy if you have no intention of attempting to overpower the sun with outdoor portraits and figure on doing most of your flash photography indoors or on dark and dreary days. These YN622N's, however, have done what they promised to do, that is to open up a whole new world in off camera flash photography. I can now "turn day into night" outdoors without the need to attach all manner of neutral density filters to lessen ambient light. Now I can just put these on the camera and the YN-568 EX and fire away. I did read some of the reviews on this product and noted one particular concern someone had about it not exposing TTL properly. I'm not sure if that's a variation in quality control on Yongnuo's part, as I've also read mixed reviews on Yongnuo flashes too, but I currently own the YN-468ii and YN-568 EX flashes as mentioned above as well as the earlier 603 flash triggers and now these, and they have all performed flawlessly. Maybe I just won the lottery, but for the price of these things and their descriptions, I'd say I got my money's worth and then some every time I've ordered a Yongnuo product. I also picked up a YN-560 EX as a TTL slave flash and found that works nicely as a kicker behind my subject triggered by the YN-568 EX mounted on the YN-622N for studio portraiture. In short, I'm a very satisfied customer, as I can't imagine how much money I would have spent for the equivalent in Pocket Wizards and namebrand Nikon gear to round out my camera bag.
September 27, 2017
So far so good with one exception. I'm using this with two Yongnou flashes and a 622N-TX. YN-568II and YN-560II. When I snap the shutter on my D810, the 568II flashes first without delay, while the 560II has a noticeable delay and flashes after the 568II. When I use only one 622N with either flash, both flashes work without delay. When I switch the 622N's around to each flash the delayed results are exactly the same. The 622N-TX is set to iTTL as is the 568II while the 560II is set to manual (it is a manual flash). When I press the test button, both flashes fire exactly at the same time, I have not been able to figure this out and have sent e-mails to Yongnuo support several times and have yet to get back a response. I assume the issue is the 560II but I don't have a third flash to conduct a test, however since pressing the test button fires both flashes simultaneously, I am not so sure. If anyone has run into this issue and has a solution I'd greatly appreciate your feedback. This will be upgraded to 5-stars once resolved.
By Jarret O'Shea
September 12, 2017
Dead simple to set up. I like that they sell these in pairs, so you're already ready to use a flash off-camera. HSS works very well, and as far as I can tell so does the TTL information. Have also used these with Canon camera (no HSS or TTL available there, but the triggering itself still seemed to work.) Only con: these seem to be a little finicky. With my Nikon camera, two SB700 flashes, and one Meike 910, I'd say all three flashes fired correctly about 80% of the time. Now, it's possible some of the other times were due to the different recycle times of the flashes, but I wasn't shooting overly fast. With a Canon camera all three fired correctly maybe 60% of the time. Of course if you're going to be using a Canon camera you should just get the C version of these, but there it is. Still, for the price, which is fantastic, these are a great deal. If you're a pro, you might want to pony up for the better known and potentially more reliable brands, but for an enthusiast I'd say these are hard to beat.
August 22, 2017
These work and are really easy to use once you decode the chinglish they are written in. I have the ones compatable with NIkon and if you have nikon compatable flashed that support the iTTL they will adjust the flash from the transmitter mounted on the camera and make it easier to control the amount of light in the groups. They can adjust in 1/3 fstops and complete f stops. However, it is not a direct comparason of the flash adjustment using the CLS. I haven't tested them to the maxium distance but I did use them without line of sight and they worked fine at about 50 - 60 ft in the application I used them in. If you do not have Nikon compatable flashes they still function in the manual mode you just loose the ability to communicate adjustments between the camera and the flash or light. They still trigger the lights. I used them with Nikon flashes SB600 and SB900 in one setup. I also used them in a set up with the 600, 900, and a couple monolights (that were not adjustable) Keep in mind you are not adjusting them with the Camera CLS settings. The adjustments are done by using the triggers settings but if the lights do not have the capability to be adjusted with the CLS they can not adjust those lights. However, I could mix them and have some adjusted and some not. I just put them on different groups. They were confusing to learn how to use. I went to the internet for some help and found that these sites were so much better than the instructions that came with them. These made them easy to understand and now they are very easy to use. I found the instruction manual almost worthless. [...] [...] [...] I have not exercised all the specs to the limit but I have used them a number of time and they work fine. They probably are not as easy to use as pocket wizards but then for the cost of being able to control 1 light with PW you can control 3 with these. I am not a pro photographer so these fit my budget and applications.
August 19, 2017
The goods arrived fast in a bubble-envelope, which concerned me a bit. Luckily, I don't see any damage of it. They are packed neatly in a small box. The product seems to be nicely built. I quickly tested it with my D7000, SB-400 and YN-468ii flashes right out of the box. I shot at a scene with white background. A quick summary is as follows (about 200 shots in total): With SB-400: 1) SB-400 on D7000 hot-shoe: the exposure is right on the spot 2) Off-camera (ie. SB-400 on the remote YN-622n): the exposure is about -1/3 EV 3) Pass-thru (ie. SB-400 on the YN-622n and YN-622n on the D7000 hot-shoe): the exposure is about +1/3 EV With YN-468ii for Nikon: 1) YN-468ii on D7000 hot-shoe: the exposure is right on the spot 2) Off-camera (ie. YN-468ii on the remote YN-622n): the exposure is way over (about +6 EV)! 3) Pass-thru (ie. YN-468ii on the YN-622n and YN-622n on the D7000 hot-shoe): the exposure is about +1/3 EV Although the Y-468ii is not the product that I am reviewing here, it's quite interesting to find that YN-468ii isn't working well with its own sister YN-622n! I gave it 4-star for the following reasons: 1. All functions are working as advertized even the operation is confusing at the beginning. 2. As many reviewers said, the User's Manual needs a major improvement even I could figure it out by reading it a few more times. 3. The settings can be accidentally changed by pressing/touching the buttons unintentionally when turning on/off the power switch. 4. There is no 1/4-20 thread at the bottom of these units so that I can attach it directly on top of my stands.
July 11, 2017
These things work as well as any flash trigger I've used! One of the things I like about them is that they don't stand up real high like the some of the name brands do. Some will will say they are big but that's a matter of opinion and mine is they are as small (if not smaller) than the more expensive popular ones. I bought them for the high speed sync ability and they didn't disappoint. They have a solid build when mounted to my camera or stand/softbox, they fit snug. The only minor complaint I can think of is learning how to increase/decrease the strength of my flash gun using the trigger instead of the gun itself. It's not bad after watching a tutorial on YouTube though. The reason for this is the wording in the instructions. I think the translation is a tad bit off from Chinese to English. (That could just be me though). Anyway, it's a a great set of triggers for the money and I'm about to order another set for my other flash guns.
By James A. Lewis
July 11, 2017
I have been doing a lot of research on this product before buying. The YN-N622-N works great for me. Please note one order will gets you two triggers kit shipped. Just think about it you get 2 triggers that can function as a transmitter or receivers. In order to do this setup I had to purchase 2 sets of radio triggers. Now I can use my old Nikon SS-20 film flash, SB-70, SB-600 all at the same time with my Nikon D80 camera. The TTL works right out the box with my rechargeable batteries. The high speed sync is a bonus that takes me out of 200 and under shutter speed range. There are so many combinations I have not even tried with these radio triggers. Shooting outside will be a lot easier without having to using Nikon line of site command center setup. Last is the price I got 4 radio universal Receiver Transmitter Transceiver triggers for the price of one competition radio transmitter! A special thanks goes out to Edison Bright for free shipping of my YN-N622-N. Edison Bright has easy to follow tracking of my product with no damage.
By C Keith
July 6, 2017
Excellent quality and first rate performance. As a photographer, I needed to upgrade equipment and the remotes from Yongnuo proved to be the perfect, lower cost alternative. Paired with the Yongnuo YN-622N-TX i-TTL Wireless Flash controller, I am able to control two flashes independently and remotely, changing power to meet my photographic needs. I shoot with Nikon and Yonngnuo makes versions for Cannon and others. One surprise was that my old flash from 35 mm film days is now back in my arsenal when used with these remotes and the wireless flash controller. Looking for a lower cost, high quality alternative? I highly recommend these. They will enable you to concentrate on the photography and not the technology.
By Robert Mealey
May 12, 2017
Love these things. Along with the YN-622N-TX Trigger these make a fantastic off camera flash solution. I think these is far better than the Nikon CLS because the flashes do not have to be line-of-sight to one another. Plus I can carry the 622N-tx in my hand and make flash adjustments as I move around setting up the studio. I don't think this is a real complaint but sometimes to start off I have to turn things on and off in the correct succession to get everything to synch up, but this has only been a very minor annoyance. These worked with both my Nikon flashes - 910 & 700 as well as Yongyuo YN 568 EX.
Meilleures ventes Plus
Votre question a été soumise avec succès
Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous
NOTRE SITE RUNS OF COOKIES