Prix uniquement sur l'application:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Partly works with my 6D and two 430EX II. Indoor fairly lit ETTL works. Darker circumstances and sett to A:B something happens and group B fire at 1/1. Have changed/reversed receivers/transmitter and flashes every possible way but still the same Group B fire 1/1. Turn on some light in the room and it works again. Makin… see more Partly works with my 6D and two 430EX II. Indoor fairly lit ETTL works. Darker circumstances and sett to A:B something happens and group B fire at 1/1. Have changed/reversed receivers/transmitter and flashes every possible way but still the same Group B fire 1/1. Turn on some light in the room and it works again. Making a hard reset on any YN622C (press Channel and Group selector simultaneously and hold) make it work in the "dark", one time then its back to Group B faults. Set to "ALL" no problems. Group A:B + C works but i have only tried with one flash in A:B, and dont remember if I tried booth A and B group on the reciver. This problem when its "dark" doesn't occur on the 60D I've tried it on. But overall one have to bump it 3/4 to 1 stop to get the same light as Canon "normal". Manual it seems to work as it should. My YN622C is marked "2014 Dec". earlier versions did have som sorts of other issues. Check out http://photography-on-the.net for better Manual than the accompanying Youngnuo manual. see less
By Pre Mol on May 15, 2018
Canon, Nikon and Pentax each have their own TTL flash metering systems, respectively E-TTL, i-TTL, and P-TTL. They all use a weak pre-flash that is metered and used to calculate flash power level required for correct exposure. E-TTL = Evaluative "Through the Lens", i-TTL = Intelligent "Through the Lens", P-TTL = Prefl… see more Canon, Nikon and Pentax each have their own TTL flash metering systems, respectively E-TTL, i-TTL, and P-TTL. They all use a weak pre-flash that is metered and used to calculate flash power level required for correct exposure. E-TTL = Evaluative "Through the Lens", i-TTL = Intelligent "Through the Lens", P-TTL = Preflash "Through the Lens". All three are pre-flash based evaluative flash metering systems. see less
By Paul on March 5, 2018
You have the option of purchasing singles, pairs or I have even seen some package three together. However, for the apx $80 you are referring to includes a pair of triggers. Good luck!
By Drpete on January 31, 2018
Hi Before we continue givibg suggestions. What flash do you have? I know you have a canon 6D and yn622c.
By Javier Rivera on May 8, 2018
The comments about the 622 are correct. However, there is an additional option: the 622C-TX. This transmitter (only) unit is designed to be an alternative to the ST-E3-RT. I don't own an ST-E3-RT, but shot with someone that had one. The ST-E3-RT and the 622C-TX are functionally very similar. You can control the flash u… see more The comments about the 622 are correct. However, there is an additional option: the 622C-TX. This transmitter (only) unit is designed to be an alternative to the ST-E3-RT. I don't own an ST-E3-RT, but shot with someone that had one. The ST-E3-RT and the 622C-TX are functionally very similar. You can control the flash units through the camera menus, and you can also control the flash groups and multiple settings on the 622C-TX unit directly. see less
By Dave on October 22, 2017
Don't know much about Vivitar Flashes but I doubt it. The flash (it self) would have to be ETTL of course but there are two models of the 622 C & N 1 for Cannon and 1 for Nikon your best bet would be to purchase a Yongnuo 565 EX flash also (about $105.00). Actually I have found the 603 & 560III flash (in manual mode) g… see more Don't know much about Vivitar Flashes but I doubt it. The flash (it self) would have to be ETTL of course but there are two models of the 622 C & N 1 for Cannon and 1 for Nikon your best bet would be to purchase a Yongnuo 565 EX flash also (about $105.00). Actually I have found the 603 & 560III flash (in manual mode) gives me much more consistent results, but then again I rarely shoot on camera flash see less
By m. Abdullah on May 15, 2018
I cannot speak to your setupI have a Canon 5d and a 600 flashit does allow me to do second curtain high speed syncI believe the 60 dwould be okay but I'm not familiar with a 560 flash
By Henry on May 16, 2018
Yes Thank you
By Shining Star Photo INC SELLER on May 15, 2018
No idea, but their flashes are very nice and worth it.
By Seneca Riggins on May 16, 2018
it is compatible with flashes that have HSS. for example, with my yn568 II it can sync up to 1/8000. but with the yn560 it will not have HSS
By cy on May 14, 2018
Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contactsouvrez ce forum en pleine page
basé sur 649 Avis des clients
Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!Écrire un avis de client
January 22, 2018
***PROS*** -Reliable -Easy to use -Capable -ETTL -IR focus assist -Sturdy -Lightweight -Great range (Mine have successfully fired every time at about 50 yards through two walls, I had no need to test its limits any further) ***CONS*** -Manual isn't very helpful, you will have to tinker on your own or gather useful tips from other owners. -A little bulky ***OVERALL*** At this point in time, you can't find an ETTL transceiver/receiver that balances price and performance so well. The functionality of these units is up there with the big boys like pocket wizard, but the cost is more comparable to a radio or ir transceiver. I could not recommend these units more.
By Joe The Flow
January 15, 2018
The are fantastic triggers and you can't beat the price. Purchased these as test to see if they were worth the money. They exceeded my expectations. Solid build, mult-channel. I'm going to purchase more of them. Here's the specs: Flash mode: E-TTL(II), Manual flash, Multi flash • Shutter Sync mode: 1st curtain, 2nd curtain, high speed sync (HSS/FP), Max 1/8000s sync speed • Control remote flash using camera's flash control menu screen(Remote Control Mode) • Support E-TTL / Manual/ Multi flash mode (Mix Control Mode) • Support FEC, FEB, FEL, Modeling flash • Support E-TTL group ratio (ALL/ A:B/ A:B:C), Manual/Multi group (ALL/ A:B/ A:B:C) • Support auto zooming, manual zooming, AF lamp • Support LCD Live view triggering • Support high-speed continuous shooting trigger • Settings saved automatically • Compatible with ALL YongNuo/ Canon EXII series flashes • Support PC port triggering strobe flashes (PC Sync cable is not included, but you can buy it from YongNuo store) • Support single-contact of camera & flash triggering (the max sync speed is 1/250s)
By Adam R.
January 12, 2018
It's been years since i had looked at any wireless flash options, and back then I just gave up because pocketwizards were just too pricey. I havent been much of a flash user over the years despite having the Canon 580 EX II. Recently I found some uses for it and was quickly unenthused by the optical slave method. After seeing Yongnuo mentioned in some Tony Northrup videos, I took a look and found these remote (and the pair of YN622C II that I also picked up) and I'm glad I did. Testing so far has been limited, but the function is everything I could ask for. My 80D doesn't know the difference between this unit and the much pricier Canon model. It also allows me to use the 622c's to control my older 580 EX II which has no radio remote functions built in. (If I were to stick with Canon, optical or a long cable would be my only options and that is far from a good enough reason to spring for the $500+ Canon 600EX RT. Being on a newer body, tgis u it can also trigger the shutter (by pressing the test button on a 622c) without even needing the control cable (which is provided anyway.) All in all, as a non-professional, I look forward to experimenting and learning off-camera flash photography with these transmitters/transcievers.
By Wing Tang
January 10, 2018
Before i received my wireless flash triggers, I've been using a 32 foot ETTL cable to help get my 580EXII off camera as a master to control the 430 EXII as a slave. Worked great, but the cable was cumbersome and a tripping hazard. So i decided to go all wireless ETTL and after much research, there really wasn't many choices. The pocket wizard system seemed over priced for what it does and that it stands vertical on a camera seems a little out of place. Then my 2nd option was the Yongnuo 622C, for the price i wouldn't hurt to try it out, so i decided to buy 2 sets. They came in the mail quickly along with a set of Eneloop rechargeable batteries I ordered for the triggers. I installed the batteries into the triggers and placed one on top of my 5DMKII and the other two on my flashes. Turned them on to quickly test out if they work or not. Worked perfectly, the 2 flashes went off simultaneously ever single time i took a shot. Anyways, I am not going to get into the mechanics of TTL vs Manual - but they both worked flawlessly depending on how you want to control the light. Bottom line, i couldn't tell the difference from when i used my ocf cable vs my new Yongnuo 622C.And the fact that the unit sits horizontal on top of my camera is plus for me, personal aesthetics I guess. If you have any questions or anything, feel free send a comment.
January 2, 2018
I have a Cannon 6d with 430 II EX flash. I tried the cheaper triggers from Yongnuo that don't allow high speed sync and was disappointed. These do exactly what they promise...allow you to control the flash from the camera. Every setting is available via the Canon menu. I thought I would be more annoyed using the Cannon menu and thought I would need an LCD screen, but I didn't actually mind using the Canon interface that much. As soon as you hit menu, you're about one click from entering the flash controls and for the most part, they are pretty strait forward. That being said, I wish I had opted for the the kit with the YN622C and the YN 622C-TX since that is the ideal way to control these and the cost is the same. I am not a serious photographer. Just a hobbyist who would like to learn more about off camera flash.
December 28, 2017
Those YN622 for Canon are awesome!!! they work great in TTL as well as manual. I use them with a Classic 5D as well as a 1D mark II and 1D mark III. I read some reviews saying that they did not work with some Canon camera. My question is : did the owners of the camera bother to read the Yongnuo instruction manual that came with the 622????? There is a trick ( for 5d Classic and 1d M2) in case you don't know if they are set in TTL or Manual...press the Channel button for 3 seconds (Ch1 will blink) then try the flash...if it fires in full blast manual mode, then press the Channel button for 3 seconds again and it will then fire in TTL mode. (do the same if you want to switch from TTL to Manual) Anyways, those YN622 are the best that you can get for the price if you are looking for off-camera TTL. BUY THEM!!!
November 28, 2017
I had seen the previews for these triggers a while back, and honestly it all seemed to good to be true.Then I saw the "blue matinee photography" video on youtube and I was blown away!These things just work,The ability to control everything from the back of my camera "Canon Flash System style rocks" Wireless ETTL -AWESOME Transceivers- AWESOME Manual Mode _AWESOME Canon Ratio control-AWESOME 2 under appreciated features of the triggers are the on trigger AF assist Beam The steal and widely unknown feature is the "super sync" This allows you to shoot well past you camera sync speed and wide open in daylight with large strobes.I have used these on my T1i as well as my 6D, no problems.My only gripe (reason for 4 stars) simple matter of concern.I wished they had included a usb,connection for updates and what not.But honestly for the price I am beyond satisfied!
By Craig Shue
October 20, 2017
I have tried Phottix Odins and Pocket Wizards as well as simple radio transmitters. With Pocket Wizard you need the FlexTT5 trasmitter with the AC3 zone controller and the MiniTT1 receivers for the flash. A FlexTT5 with MiniTT1 kit will run you $430, the AC3 zone controller costs $80. A Phottix Odin set will run you $400 with two receivers. The Yongnuo YN622 set for $85 does MORE than the Phottix Odin or Pocket Wizard sets. You can get additional transceivers for $44, the better value is to buy the pair. The Yongnuo units operate as transmitter and receiver so if you have multiple units and happen to accidentally break one, you haven't now lost your only transmitter like you would with other manufacturers. I really like that feature, not that I'm rough with my equipment but it's a safety net. I've used these on a Canon 7D and 5D III body. They have not failed yet but I've only used them for a short period of time. I like that the led's are bright and give you a confirmation of everything working and being ready. Now for the part where these really beat out the other manufacturers, mount one on your hot shoe and you control all settings from the in camera menu. You can set the ratio, flash zoom, mode (ETTL, Manual, Multi) in the menu. Phottix Odin sets are the only other model I found that has an LED menu but it's on the transmitter atop the camera. With Pocket Wizards you need to use the AC3 to control ETTL/Manual and it's with slide switches, not too convenient to see the settings when in a dark environment where you would be using flash to begin with. The YN622's also support HSS if you are shooting outdoor and wanting to shoot at faster shutter speeds than your camera's default sync speed. I sold my Canon 430EX II flashes and bought a couple Yongnuo YN568EX units, they were not compatible with the Phottix Odin set I had so I decided to try Yongnuo's setup. Very happy with that choice. The Yongnuo YN622 tranceivers are an incredible value and provide the best function of anything out there. The only negative I have for them is they do not have a 1/4" lug, you have to mount them on a cold shoe, either the stand that comes with your flash or a cold shoe adapter on your light stand. Not a big deal but something I've been used to.
By Julius Caesar
October 20, 2017
I postpone all reviews until I have thoroughly tested and used the product. I can't tell you how many reviews I've read raving about a product and then you find out that they just received it. How do you review something you barely used or in some cases haven't used at all? Please people use the product and then review, or at least update your review after you have used it for a few months. Sorry. Had to say that. So the review. I have used the YN622 for about 6 months now. I originally bought 2 and after some weekend sessions (I never use untested equipment on professional gigs) I bought two more. I now have 4 total giving me 3 off camera flashes and potential a fourth on the camera. I have used these quite a bit and they have be very solid. I have had a few glitches where they wouldn't work so I switched the transceiver on my camera with the one I was using with the flash and the problem seemed to fix itself. I may have not had it completely tightened down. There have been some other small glitches, but being in the heat of the moment and trying to get a shot, sometimes I don't slow down and think about how everything is set up. These work great with the ETTL and being able to set the flash manually from the camera is pretty awesome as well as using the ETTL feature. I only shoot manually so I haven't truly tested the ETTL function, but the times I have used it it has worked flawlessly and as expected. I bought these over the other options because of the ETTL in the event that I would like to use it, but the added bonus of being able to set the flash manually from the camera is pretty awesome. I only have one ETTL flash (430EX II) and that is the only one that I can set from the camera. The others are just manual flashes and they have to be set from the flash. My one complaint is that it is really easy to hit the buttons when moving the flashes around. You can change the channel or group by accident really easily. Also the light communication method is a little confusing. One more minor nitpick is that it is really hard sometimes to unlighted the transceiver from the camera or stand. It is just hard to get my fat hands between the camera and transceiver to get a grip on the locking wheel. I would definitely recommend these especially if you have ETTL flashes and want to use that function. They have been reliable for probably around 2-4 thousand shots so far, maybe more.
By Robb McKindles
September 17, 2017
the triggers work as good as my Pocket Wizards. I did have one of 4 stop working after only a couple uses, and UNFORTUNATELY, after TWO EMAILS to the company I ordered from here on Tomtop, I have not heard back from them. Very disappointed. I am a wedding photographer and had purchased these to test for the future and I'll certainly buy more, just not from this company. I sent an email via Tomtop and directly to the customer service email that Tomtop gave me, and have not heard a peep. I had every intention on purchasing more from this company, but forget it now... I sent the first email over a week ago and another two days ago and still nothing. sigh... The triggers are good. The only flaws are that the buttons are very sensitive and easy to change channels if not careful, and unless you are using a flash with a lock (Canon 580ex), it can be difficult to remove the flash as it's difficult to loosen the dial due to the position on the trigger. The positive note is that this means that my flash is not gonna come off, which is good.
September 10, 2017
I was a little concerned at first because i was getting inconsistent results using rhe HSS. However, I realized that my 430exii flash fits VERY tightly on the Yongnuo yn622-so much so that I did not get it on the hot shoe completely. I gave it a little more push and it "clicked" into place. No issues since. And I didn't have to push so hard that I'm concerned with breaking it or anything. Build quality is very good. Works amazingly well and its the best bargain available around for radio flash triggers. Using it with the 5d mkiii and the camera can now completely control the flash remotely. Also the AF assist beam is pretty cool. It will be a bit too high to line up with the af points at 3-4 feet, but beyond that it will line up pretty nicely. Very cool.
August 24, 2017
I love these triggers. My wife and I are professional wedding photographers, and we are forever having issues with our Canon flashes working consistently when remote. Many times the Canon systems will only work as line of sight, unless you are willing to drop a lot of money to upgrade to the new 600series flash. We have two Canon 580ex and three 430ex flashes, and these triggers work perfectly. All I really needed was a system that could help me light the dance floor even when people are blocking the line of sight. These triggers fit the bill, the fire all my flashes from hundreds of feet away, and even rooms away. The Ettl compatibility is great as now I don't have to set all my flashes manually and can do everything from my camera. These also blow my pocket wizard setup out of the water. They are less glitchy, work in about any configuration, and are way cheaper. Bottom line; if you need a systems that does not require line of sight, is simlpe to use, and uses Ettl, than these will not let you down. I love them, I am ordering more.
By Gadget Lover
August 22, 2017
Very nice and inexpensive transmitter. I use this to trigger Yongnuo YN622C II receivers and they have worked without fail. Much less expensive than a Canon option and I'm so glad that I stumbled across this product. For the price, probably even aside from the price, these Yongnuo products are great and I am amazed how off camera flash has changed my photography, without taking all of my money. Of course, I have had flashes not fire, but I don't think I could ever trace the reason to this transmitter or triggers. My only problem that I had with this is the mount design. What I mean is that it mounts horizontally on your camera hotshoe. When you need to adjust your lights, and you always need to make adjustments to your lights, I would much rather have a vertical mount while shooting on a tripod. With the horizontal design, I (and I suspect most people, as I'm 5'10") aren't tall enough to look down onto the screen to make adjustments. This means you either need a step stool or you must move your camera off subject, tilt your camera so that you can see, then make adjustments. Of course, if you're off-tripod and just shooting freestyle, this is not an issue at all. Other than that, it's pretty easy to make any/all adjustments. You can control your flashes using TTL, Manual mode, and highspeed sync. I can't imagine anything that a Canon transmitter or Pocket Wizard could offer that this doesn't do at a MUCH cheaper price. As a matter of fact, after much research and comparing options, I was very close to purchasing the Pocket Wizard option when I came across this product. I am so glad that I chose this. Other than the fact that Pocket Wizard does offer a vertical design and maybe easier adjustments as a result, I can buy this transmitter and a bunch of triggers for the less than the price of a Pocket Wizard transmitter. Yongnuo option is a much better route because, with the same amount of money, you get so many more options in gear. In my view, this is a Pocket Wizard killer. I have only good feedback and would recommend this product.
By Bradley Moore
August 4, 2017
This is my third try at finding an RF flash control for my Canon 60D Camera and Sigma 500 & 530 Flashes. This one works with both flashes set to ETTL Mode. I photograph houses for Realtors and often need a second flash to light adjacent rooms. I have been looking for an RF unit to simplify my workflow. There are two reasons for not giving a 5-star rating. First, it occasionally fails to fire the remote flash and, second, I have not found how to control the remote flash level from the camera. The instructions in the users guide are a bit short and of course, only discuss Canon flash equipment. I have looked on the Yongnuo site and have not found any other information. With the remote flash set to ETTL, i get a pretty good flash level, but can't adjust it. I have experimented with the ratio setting for A:B flash control but it does not seem to make a difference. If I set the remote flash to ETTL C1, it reads the camera settings for things like zoom but it flashes only very dimly and doesn't seem to be controlled from the camera. I will have to see how this system works on the job with different shooting conditions.
By Mark Serrano
July 24, 2017
Even though the YN-622C is China-made, its build quality and packaging are superb! It's lightweight but solid. I ordered 2 pairs (for a total of 4). The good thing about these transceivers are they are both triggers and receivers! Hit the test button on any of these transceivers and it will fire the rest of them! I've tested the devices last night, since I just got them yesterday. I've attached these YN-622C on the following devices: * Canon 6D with 50mm 1.4 * YN-560 III flash * 2 Canon 430 EX II flash I was in a low-light room, lit by a single flourescent buld. I was suprised first of all by the AF-assist of the device! My previous setup was a Canon 90 EX flash for triggering and 2 Canon 430 EX II. My 6D, with its legendary low-light capability, are having a hard time focusing. But with the YN-622C, it's able to focus on a black background without a hitch! It's amazing. Now here comes the best part. As soon as I start capturing photos, it wireless triggered my other flashes without any issues, even at 180 degree range. Initially I had problems with my Canon 90 EX flash trigger. Apparently it can only trigger at a short distance and at a very limited angle (maybe 90 degrees). But the YN-622C has no problem triggering the flashes at any angle and range. I've also mounted the YN-622C on a Cheetah Qbox 24 softbox on a Manfrotto lightstand. It's kinda bulky and added height to the flash that it won't fit anymore the flash inside the softbox speed ring. So I had to position the flash at a 90 degree angle. And that turned out perfectly great (By the way I was using the 430 EX II flash). Also, I've mounted the YN-622C on Manfrotto lightstand with a Stroboframe using the YN 560 III. So far no problems. If could only return my 90 EX and 430 EX II. As a side note the YN-560 III is also a great device to pair with the YN-622C.
By Roy Ang
July 20, 2017
Back in the early days I got uber frustrated with the Pocket Wizard Flex system. The last straw was two brand new latest firmware transmitters with 10 brand new latest firmware receivers and a box (10) brand new 580EXII's and nothing was firing let alone consistently. Gave up on the kludgy socks and mounts "fixes"...switched to RadioPopper PX's. Damn expensive and cryptic interface...but they worked pretty consistently. BUT NOW...these kick butt. Bought 7 of them to push as many as 6 580EXII's and 1 as the master Sometimes using the pass through hot shoe feature on the master with both of my Canon 1DX's. Over the last two days - outside mid day, sunset, indoors with partial obstructions...fired off every time. Worked with older bodies, 1D4s, 5D (all gens) as well as a Canon SX40HS. Clustered 6 of the 580EXII's around the umbrella shaft in circular mounts in a big parabolic...worked perfect. Same setup with older 580EX's same consistent results. Super bang for buck...much easier to use than the RadioPopper PX's and way, way, way more consistent than the PW Flex debacle. Only weirdness...sometimes my cats and dog flashes (320EX and 430EX) will fire at full power. But I didn't spend a lot of time looking for a consistent pattern for the cause. I just adjusted flash exposure comp. The 90EX works as well as the 270's both I and II versions. Even an older 220EX. They use AA's...thank god no stupid, funky expensive not always available on location... CR this and CR that battery(s) Bottom line...glad I bought them. Absolutely NO regrets. The Radio Poppers are now relegated to the backup bag or the occasional crazy long distance maybe 5% of the time shoot.
July 7, 2017
Well at least for me they are. I do not see the need for anything else. These things arrived and I played with them for a day and immediately ordered another pair. They work great and allow me alot of options use wise. I can use them in full ETTL mode or manual. Set up different groups of speedlights. Control everything from my Canon 5dmkii. I haven't had a miss fire yet. I have been mainly using them for in studio and location stuff. Also like the pass through on top of it so I can mount something else. AF assist too is good if you have a Yongnuo flash head without it. Not sure if AF assist works for other models. I would think yes. I have been using these primarily with a Canon 580EX and 580EXII for over a year now. Just buy them. You won't be sorry.
June 18, 2017
The reason i bought this unit is for the HSS function. It fires every time. Looks very elegant. The only negatives so far is that the battery bay cover can be easily knocked out, which happened with me twice while removing the unit from the hot shoe. Also, both units i received had the hot shoe mount in a slight angle off center. I.e., when mounted on the camera, the transceiver points slightly to the left. On a side note, for those of you who own a Canon 5D MK III, I finally found a use for the "disable flash" option when flash is mounted! We all know that when flash is connected to this body, "Auto ISO" is automatically disabled. This also happens when you connect this transceiver. So in order to take advantage of the focus assistance light that comes in the transceiver, and enable the "Auto ISO", you have to choose "disable flash" on the first menu from the left. I hope that makes sense.
June 10, 2017
Unboxing: Triggers come well protected in the manufacturers package. Instruction manual included. Build Quality: Looks good and all options and lights are easily visible. The casing is acceptable though the plastic seems not as durable as other triggers in higher price ranges, this is to be expected. One trigger was assembled slightly out of line; when mounted in the camera's hot shoe the trigger isn't perfectly straight. This has no ill affects on the functioning of the unit though and I wouldn't expect this on every trigger purchased form Yongnuo. With a flash mounted the triggers shoe doesn't feel as strong as higher priced models. Overall build quality is good and exactly what I would expect for this price range. The triggers can handle being tossed into a bag but the casing most likely wont survive a good fall. Function: Many options and easy to use, you don't even have to look at the manual. It is completely intuitive. I've used a number of these and almost never have misfires... does happen from time to time but not to a degree that would prevent me from buying again. Works at a very good distance and works well through the walls of an average home. Overall: For the price these are great and can compete with triggers approaching the $200 range. Only four stars because I feel the casing could be a little stronger for a small price increase.
By Bryan Rupp
June 7, 2017
I'm blown away by how affordable these are and how well they work. I'm a full time professional photographer and I need all my equipment to work all the time, and these totally pull their weight. I did have to do a reset on them because I couldn't get the on camera flash to fire in manual mode (it would automatically switch to ETTL even when in manual), but now these are perfect. They could be more user friendly, I had to do some serious googling to find the reset, but the basic functions are simple enough and work really well.
Agenda Evénements Plus
Meilleures ventes Plus
Votre question a été soumise avec succès
Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous
NOTRE SITE RUNS OF COOKIES