VIP Privilege Activity, Enjoy Exclusive Member Price

Passez la souris pour zoomer

YONGNUO E-TTL YNE3-RX Récepteur d'Eclat Eloigné sans fil pour YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT

YONGNUO E-TTL YNE3-RX Récepteur d'Eclat Eloigné sans fil pour YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT

Prix uniquement sur l'application:

Vous avez déjà TOMTOP APP

Scannez le code du produit à acheter directement!

N'a pas de TOMTOP APP

Téléchargez et profitez d'offres supplémentaires!

De expédition:
  • Entrepôt de Chine
  • Entrepôt d'Allemagne
  • Entrepôt d'Espagne
Veuillez sélectionner un entrepôt
Habituellement expédié en jours ouvrables heures
La demande a échoué! Veuillez réessayer.
Désolé, il semble qu'il n'y a pas de méthodes de livraison disponibles pour votre emplacement.S'il vous pla?t Contactez nous Pour plus d'aide.



United States
Stock dans: china

Chaque utilisateur ne peut acheter que des 5 Pièce

Special discount has ended

Please note each user for only 1 item(s)

Arrival Notice

if the goods arrival in 90 days,we will inform you by email!


Arrival Notice

Notification Subscription Success!

if the goods arrival in 90 days,we will inform you by email!

Notification Subscription Failed!

Error appeared,Please try again later!

Arrival Notice

Protection d'acheteur

  • Remboursement intégralSi vous ne recevez pas votre commande
  • Remboursement complet ou partiel , Si l'article n'est pas comme décrit Apprendre encore plus >
L'émetteur compatible (l'unité professionnelle) : YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT
Parties de la liste d'éclat d'E-TTL compatible : Le canon EX (RT) /580 430 Yongnuo YN565C/YN465C (Les articles mentionnés au-dessus de sont pour les références seulement).

Note : Cet article inclut le récepteur, le câble et la fiche adaptateur seulement. Les autres articles montrés dans l'image ne sont pas inclus.

Emballage de la Liste :
1 * Le Récepteur
1 * Câble
1 * la Fiche adaptateur


Répondez au sujet

Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //

ouvrez ce forum en pleine page
Avis des clients

Note moyenne:


basé sur 58 Avis des clients

  • 5 Étoiles
  • 4 Étoiles
  • 3 Étoiles
  • 2 Étoiles
  • 1 Étoiles

Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!

Écrire un avis de client
  • By AT

    December 23, 2017

    Works as expected!

    Is this helpful? (0) (0)

  • By DBH1939

    November 11, 2017

    I ordered 2 of these and they work with my Yongnuo YN568EX II,CANON 430EX II AND 580EX II.

    Is this helpful? (0) (0)

  • By Taro Paredes

    October 27, 2017

    Another great product and idea by Yongnuo. I bought two of these for my YN-568 II ETTL Flash and for my Canon 600EX (non RT). Now both flashes are under Canon's RT system and can be managed by the Canon ST-E3 or by the Yongnuo version. I'm moving out the YN-622 system which is great too but with Canon RT system you can control up to 6 groups instead of only 3 as with the 622. Somebody else raised a concern about the shoe of this remote, it does not have any system to tight it to a cold shoe because it does not need one. This remote is not for your camera hot shoe, you will use them with cold shoes that usually have their own system or even better the shoe of this remote have 1/4 screw hole so you can easily tight it directly to a stand.

    Is this helpful? (0) (0)

  • By Kai Murphy

    October 26, 2017

    works great - I use it all the time

    Is this helpful? (0) (0)

  • By Jordan

    October 17, 2017

    Worked perfectly. Used it to trigger a balcar monobloc 2 through a wein safesync.

    Is this helpful? (0) (0)

  • By steve chambers

    October 15, 2017

    I have used the 622's for some time and this is so much better

    Is this helpful? (0) (0)

  • By Thomas B Humble

    October 13, 2017

    Buy with confidence

    Is this helpful? (0) (0)

  • By James R. Wheelock

    August 29, 2017

    I have 2 600ex ER's that work great for portraits. I needed an extra hair light. I bought this for my 283 flash. Works great. Better than a photo cell trigger.

    Is this helpful? (0) (0)

  • By Radek

    August 28, 2017

    Works great, just as advertised. No complains. It looks nice, is made of quality materials. I would recommend. The only problem is that sometimes it gets switched on accidentally in my bag. I like that it runs on AA batteries, just as my speedlights. It makes it easier for me to always be ready to swap or change batteries among different devices. I don't need to carry different types of batteries.

    Is this helpful? (0) (0)

  • By That guy

    February 17, 2017

    Works great with my existing Canon and YN 600's

    Is this helpful? (0) (0)

  • By Ian

    February 15, 2017

    Using this to trigger a 430ex ii with a yne3-rt. Works great and has good range.

    Is this helpful? (0) (0)

  • By Jack D

    February 14, 2017

    The YNE3-RX work with the YongNuo YN-E3-RT wireless flash transmitter or the Canon ST-E3-RT. They feature eTTL capabilities and allow me to use my EX430 flash units with the same radio control as the EX600 Speedlites. Very easy to setup with a backlit display, ready light, test-fire button, PC connector for remote trigger and a couple of cables for other flash units. An affordable way to update your non-wireless Speedlites.

    Is this helpful? (0) (0)

  • By pawel

    January 25, 2017

    works great with my canon system

    Is this helpful? (0) (0)

  • By Hugo G.

    January 24, 2017

    they work exactly as you would think, they let you turn (almost) any flash in a canon rt system slave ...

    Is this helpful? (0) (0)

  • By Alex T.

    January 20, 2017

    Great wireless TTL remote for my AC powered strobes and also for Canon 430ex flash as TTL or manual when paired with the Yongnuo controller. Can remote control your camera shutter as well.

    Is this helpful? (0) (0)

  • By Gus Wanner

    January 19, 2017

    First, let's clear up some miss-information: This receiver will NOT control Canon flashes that cannot be controlled by the camera's flash menu system. This includes older flashes such as the 220EX, 420EX, 430EX, 550EX and 580EX. These flashes MAY be triggered by the YNE3-RT in ETTL mode but I have not seen this verified by anyone on the 'net. This receiver WILL control and trigger the following newer Canon flashes that can be controlled by the camera's flash menu system: 580EX-II (ETTL, Manual, Strobo, Group ETTL, Group Manual {but NOT Group Auto External Flash Metering}, HS Synch ), 430EX-II, 320EX, 270EX-II and 270EX (All of these will work in ETTL, Manual, Group ETTL, Group Manual, HS Synch). When used with the Canon ST-E3-RT transmitter, the YN-E3-RX (firmware 1.02) remote release capability does NOT work; in addition, the test button will fire the attached flash 1-TIME whenever a setting on the ST-E3-RT for that remote has been changed - this is also true of the test pushbutton on the ST-E3-RT as applies to a remote YN-E3-RX mounted flash. These issues do not occur when the YN-E3-RX is used with the YN-E3-RT transmitter. Other than this test/remote release quirk when used with the Canon transmitter, the unit functions as expected. I recommend use of Alkaline batteries (as opposed to rechargeable NI-MH) for most reliable performance. A manual flash or strobe can be connected to the YN-E3-RX PC synch socket and will work fine in parallel with a flash installed on the hot-shoe.

    Is this helpful? (0) (0)

  • By Anthony M

    January 17, 2017

    This is the product that Canon should have released in conjunction with their 600EX-RT. But apparently supporting legacy devices is not in Canon’s marketing gameplan. So a swift kick in the teeth for you, dear consumer. Of course, it seems it would have made more sense to support professionals with their stock of 580EX's. That way, they'd continue purchasing the 600EX-RT's as needed, instead of looking to competition like Yongnuo or Shanny for a new system. Certainly, many photographers tossed their 580EX's and bought a bunch of new 600EX-RT's. But I'd wager just as many if not more decided they'd had enough and invested elsewhere. But what do I know? I just hope Syl Arena can sleep at night knowing he was pitching the 580EX system and radio triggers, all the while testing out the new 600EX-RT's. Luckily I fell on the far side of that cusp! I had just decided Yongnuo was going to kill me after a catastrophic failure on a job in front of new clients. So, I bought into the brand new 600EX-RT system before the first review was out, and the 580EX's were actually going for their highest prices as people were afraid of the new system. So, how does it work in tandem with the real thing? Build The construction of the device is pretty much as you’d expect. It’s solid, ergonomically sound, and dull looking. The placement of the test/release button is fine, and it’s a fairly well done 2-position button with a positive feel. The hot and cold shoe placement are towards the rear of the device. The PC port and USB interface are on the left side, the power slide-switch and link indicator light (easy to see wrap-around design) on the right side. The hot shoe at the top, and cold shoe at the bottom. The cold shoe also has a ¼” thread in it, which is a nice touch, as it’s all metal and keeps the placement and balance correct. The placement of the rather tiny LCD window makes for easy reading when used as an on-camera device, or when used on a stand with a flash attached. In fact, the entire layout seems that on-camera use was the main consideration, a bit odd considering its purpose. There are 3 buttons to control the flash, in the usual multi-toggle long/short press fashion. I’d much prefer something as snazzy as the YN-E3-RT setup, but that would increase the price and probably the size of the device as well. All of this can be controlled via the camera, which is how I do it anyway. The battery door on the bottom works just fine, is a typical press and slide style that doesn’t seem particularly delicate. The first most noticeable and serious issue will depend on how you’re using this. There is no clamping mechanism for the cold shoe. My guess here is because of the design, this would add close to half an inch to the interior part of the cold shoe, making it quite large. So if you’re using this on camera, and your flash has modifiers, this could be an issue. However, I don’t believe this is how most people will be using this product. They’ll have it on an adapter of some sort, and most cold shoe adapters have clamping mechanisms themselves. I know all of my swivel umbrella adapters are like this – and there’s no way I could use the clamp on my flashes even if I wanted to. If this were a vertical layout like many triggers, they could have included it. So, if you’re planning on using it this way, be forewarned. I for one am glad to not have it and keep it compact. Another minor complaint that follows this point is that the unit is designed to only be placed on a stand of some kind. So you can’t just set it down on a table if there’s a flash connected via hot shoe. Again, because of the horizontal design I don’t see how that could be changed otherwise. Just expect you’ll need to use your flash stand if you just want to set it onto a table top. This also has never been an issue for me. Overall, this is not quite as nicely built in terms of fit/finish/materials as the Canon copied transmitters or flashes, but the same as their 622 series trigger transceivers, which is to say just fine. For a sub $50 it’s excellent. Handling I really love the flexibility of this device. It works for everything I’ve tried it with. Yongnuo 560EX, Aperlite YH-700, Canon 420EX (all full functionality), and my RoveLights in conjunction with their wireless controllers. The range of this receiver seems to be excellent, and far exceeds any testing I’ve done with optical receivers, and is easily as good as my triggers. I’ve not done extensive testing, however I can say that I’ve had it work using both the Canon 600EX-RT and Yongnuo YN-E3-RT transmitter at around 400 feet. It’s worked fine in different rooms, and in commercial buildings and basements, or on the other side of a house. It’s a robust and powerful little device. I’m delighted actually that for >$50 you can get something of this caliber. I’ve not noticed anything out of the ordinary as far as battery life or other issues. As I mentioned in my YN-E3-RT review, if I’m dumb enough to leave batteries in the device for a week or so, it will drain the batteries to a null state. Normally, I try to remove batteries from all my devices after use, unless I’m positive I’ll be using it again the following day. Even then, that’s not recommended. I don’t know if it’s just my device, but it’s the only issue I’ve had with that unit. Although the design seems to be meant for on-camera as I mentioned, I’m not really sure how it could be configured differently. It follows the general scheme of most transceivers on the market. It’s most likely going to be mounted on a light stand, and in this regard there’s different ways you can do this. From a typical umbrella swivel adapter to just screwing it directly onto a ¼” stud, it will remain unobtrusive and still easily accessible when necessary. Honestly, there’s not much reason to see the LCD panel as you’ll have all that information on your camera. For my use with studio lights, I simply affix it to my light stand using a cable tie. I can’t see the LCD this way – but I don’t need to. Not a particularly elegant solution, but it works. The YNE3-RX has been good enough that I’ve purchased another one – although I’m interested to see if Shanny decides to try their hand at one as well. Right now, this is the only game in town. With that considered, the price is excellent and it’s an inexpensive way to keep your legacy devices and move forward with the Canon RT system, be it Canon or Yongnuo based. Pros: - inexpensive - great range - easy to use – recognized & works perfectly with Canon menus - decent construction - bright green LCD backlight - ability to upgrade firmware - PC port allows further flexibility with legacy devices and studio lights - flawless performance Cons: - no clamping mechanism on cold shoe - simple tiny toggle type buttons for unit control - tiny LCD window - a bit bulky Really, it’s exciting what is available to us as photographers these days. Companies like Yongnuo have raised the bar and lowered the price for flash based products. They’ve also gotten companies such as Pocket Wizard to come out with slightly more competitive products at better prices. Competition will do that. What’s even more astounding is that in a few short years we’ve gone from the “eBay triggers” that worked about 70% of the time (tops) to flawless and consistent performance at incredible ranges. As I mentioned, this is the device Canon should have introduced with their RT system. Yongnuo has stepped in and filled a void with a superior product at a great price. What’s more, it’s allowed me to use lights that otherwise would have given me fits. The Adorama RoveLights are excellent, save for their infamously terrible wireless trigger/controllers. *These* harken back to those early eBay Chinese trigger days. However, with the RX, I can have flawless firing, and control the light’s settings via the Rovelight Controller, which works far more frequently and consistently than the controller by itself. I can now use these excellent and powerful wireless monolights in conjunction with my Canon flashes for fantastic lighting effects. It’s true, I bailed on Yongnuo when their flash failed me at the wrong time. I invested in Canon at that point as I couldn’t trust Yongnuo for work. But I’ve slowly moved back. Certainly I still believe that Yonguo’s flash QA can be spotty. They’ve release products sometimes too soon, and there’s quite a bit of variation on the line in terms of vendor parts. I do believe this mostly applies to their higher end flashes. Since my bad experience I’ve come back to Yongnuo on several products, and they’ve all worked flawlessly for me, some for 2-3 years now. If you’re looking at the YNE3-RX, you know what you’re doing – and know what you want. I’m here to tell you in my experience it does what it should, and does so perfectly. Verdict: 5 Stars, very well done.

    Is this helpful? (0) (0)

  • By E. Luciano

    January 14, 2017

    When it works, it works but that's if you can find a receiver that will. I may have ordered around 8 of these receivers before I found 2 that worked completely. I couldn't pin point the issue but I bet it had to do with the hotshoe mount not having complete connection. My Canon 580exII wouldn't work in ETTL mode at all but another third party brand would on the same receiver. If your'e looking for cheap that works well, this is your product but beware the QA issues that come with it. If I had known better, I would have bought 6 of them at the same time and found the ones that worked.

    Is this helpful? (0) (0)

  • By HJR

    December 7, 2016

    Like my other Yongnuo products it works as advertised but the build quality leaves a lot to be desired. So far it's working well, I'm just very careful with handling it.

    Is this helpful? (0) (0)

  • By Nichols

    December 1, 2016

    works as advertised

    Is this helpful? (0) (0)

Meilleures ventes Plus

Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous

Récemment Vu


TOMTOP utilise des cookies pour vous offrir la meilleure expérience d'achat. Si vous continuez à utiliser nos services ou à créer un nouveau compte, nous supposerons que vous acceptez notre Politique de Confidentialité.

Dites-nous quel produit vous souhaitez acheter en groupe

Click the refresh verification code