Prix uniquement sur l'application:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
I just got this unit (Feb 2016) after contacting Yongnuo..the latest firmware is needed but it does now work fine w/ 430 RT. Just make sure you set the ID to match and also set the channel to auto.
By Amy K. Yu on February 27, 2018
Not sure, I'm using it on my 5d Mk iii with the canon 600ex-rt speed lite.
By Mario F. on December 29, 2017
Hello You need YN622 Thank you … see more Hello You need YN622 Thank you C canon N Nikon see less
By A&R PHOTO VIDEO INC SELLER on November 9, 2017
It will ineed, however, if you have the black model of the a6000 and not the silver, you'll need to remove some of the black paint from the metal on the hotshoe to get it to trigger.
By Ronn Murray on January 17, 2018
By Kyle Griffin on March 22, 2018
Hi Friend, our YN-E3-RT suits for: ALL Canon DSLR Camera with E-TTL II / E-TTL auto flash Canon 600EX-RT… see more Hi Friend, our YN-E3-RT suits for: ALL Canon DSLR Camera with E-TTL II / E-TTL auto flash Canon 600EX-RT Canon ST-E3-RT Yongnuo YN600EX-RT/ YN600EX-RT II/ YN968EX-RT see less
By YONGNUO SELLER on March 21, 2018
By alliegator on March 18, 2018
Only the 600exrt
By Esthela Berenice Gomez Bolado on May 2, 2018
No! It will only work with Canon 600ex-rt. Maybe because of different frequency.
By RUDOLPH on March 7, 2018
Yes you need to update the firmware but then it will work w the newest canon flashes- it’s fairly easy to do
By Phillip Guyton on March 7, 2018
Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contactsouvrez ce forum en pleine page
basé sur 157 Avis des clients
Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!Écrire un avis de client
By JAKE B MILLER
January 29, 2018
Bought this to replace Canon's ST E3 RT which does not have IR Focus Assist for some dumb reason they took it off. Anyway this Yognuo has the IR and works perfectly. if your hands hurt at the end of the day and you are tired of keeping your flash on-camera during low light the wedding receptions get this one instead. ///////6MONTH Update: Product seems to work fine but display backlight seems to have failed which is quite frustrating in the near dark of a wedding venue. I am hoping there is warranty service available.
By Mike Rudd
January 15, 2018
Quite impressed with this unit. Has worked flawlessly with the Yongnuo flashes I also purchased. Bought these when my faithful 580EX took an unexpected fall and quit working. The build of the wireless controller is great and it was very easy to get up and running. Also have some other Yongnuo wireless triggers and while they work well, it seems the buttons to switch channels get bumped often and you have to change them back to the correct channel frequently. The YN-E3-RT doesn't have this issue at all. It just works. I use this mainly for portraits on location triggering multiple flashes on light stands with soft boxes.
By S. Katz
January 4, 2018
I am using a brand new YN-E3-RT (updated to the latest firmware, vr 1.24) with a brand new Canon 430EX III RT, YN600EX-RT II and a Canon 5Ds R. I can't get the YN-E3 to link with the 430EX III. I will link with the YN600EX-RT. I tried setting the channel in Auto mode as well as manually. Oddly, if I use the 430EX III in the camera's hot shoe as a master it will link up and works well with the YN600EX-RT. The 430EX III RT will only rule, it will not serve! I see a number of comments where updating the YN-E3-RT software fixes the issue. I'm hopeful that Yongnuo's next firmware update will correct the issue. In all other respects I like the YN-E3-RT. I use it to control a couple of YN600EX-RTII speedlites. No issues. So my 4 star rating is solely a function of the 430EX III issue.
January 4, 2018
Just adding one more confirmation, without firmware update it did not work with my 430ex III-RT at all, but after firmware update it's working perfectly with my 430ex III-RT (III has wireless, unlike II) I had to download two programs from the yongnuo website (I downloaded them onto a virtual machine so no virus/malware could be on my main one, it's often a bad idea to install obscure chinese software on your main computer), plugged device into usb and updated the firmware on it. 5 seconds later it was perfectly controlling both my 430ex III-RT wirelessly just like the official device, and for something like a quarter of the price. A few minutes of extra work is certainly worth saving three hundred bucks in my own opinion. Though the real drawback is I've heard if the device does malfunction sometime in the future, the cost of shipping to china, questionable repairs and wait time may make it easier to simply buy a new one. Of course, if the alternative costs as much as 4-6 yongnuo transmitters, it's hard to be mad about eventually having to buy a single cheap replacement or two.
December 30, 2017
The only thing to be aware of, in my opinion, is that currently the AF assist beam does not work with the 5D Mark IV. I've used it to trigger the Yongnuo YN600EX-RTII flash, Canon 600EXII-RT on the 5D Mark IV and the 5Ds. The inclusion of the AF assist beam on the Yongnuo transmitter is GREAT as the Canon transmitter does NOT have it (which is ridiculous, IMO). The range of the Yongnuo transmitter is 100 meters whereas the range of the Canon transmitter (ST-E3-RT) is only 100 feet. So the Yongnuo transmitter will work more than 3x the distance vs the Canon.
December 23, 2017
I bought this to control both my Canon 600 EX RT's as well as my Canon 430 EX III RT's. I contacted Yongnuo and they told me it will work w/ 430 RT as long as I got the latest firmware. I updated the firmware and matched the 4 digit ID but it wasn't until I changed the channel to "auto" that everything worked fine. Now all the flashes and this affordable accessory talks just fine. Some other things to note. The AF assist cluster is not well thought out but it's nice to have. The cluster is noticeably off center towards the top of the camera and doesn't cover all the focus points. Still, it's nice to have but I think it could have been designed better. The battery door is a bit stiff and the unit sits on my 5D Mk III with a little play but overall, the build quality is not bad at all.
By David Terry
December 23, 2017
I can tell you that this remote is nearly an exact duplicate of Canon's ST-E3-RT (I have 2 of those as well, so I have a lot of experience with both of these). I have used all four remotes simultaneously along side of each other without any difficulty controlling the same set of lights. The Yongnuo has performed admirably. The two biggest advantages that I see over the Canon part: 1) price, obviously, and 2) FOCUS ASSIST! Why Canon can't build focus assist into the camera body or even into their remote is beyond me. This remote simply works in dark situations where Canon's remote does not. If you can't focus, there's no use taking the shot. For reference: I currently have a mix of 5 Canon 600EX-RT flashes as well as 4 Yongnuo YN600EX-RT flashes and both the Canon and the Yongnuo remotes work at controlling all 9 flashes without any difficulties. *** EDIT TO ADD: I forgot to indicate why I only gave it 4 stars instead of 5. The problem is that the focus assist beam could be improved on. At least on my camera, the pattern it emits is above the center of the viewfinder. So I have to remember to use focus points up above the center in order for the focus beam to be of any use. Putting a regular Canon 600EX-RT on the same hotshoe provides a more useful pattern for focusing ... but then you're using up one of your flashes instead of a transmitter to do the job. (and I hate the extra weight and bulkiness of having the flash on camera)
By Trent Gillespie
December 19, 2017
Surprisingly this transmitter works as well as the Canon... and it has the AF assist beam which is huge for dimly lit wedding receptions. The reason I didn't give it 5 stars is because the range isn't as good as the Canon's, and the scroll wheel is a bit finicky. Otherwise, it looks and works just like the much more expensive Canon version. As is the case with most aftermarket replications, it doesn't work 100% like the original, but does the job... and even gets the shot where the Canon cannot. Edit: After almost a year of use, we grab the transmitter before we do the Canon. The reason being is the AF assist beam. While the scroll wheel will drive you crazy at times, once you are setup, you don't have to touch it again. What does matter is getting the shot, in which the Yongnuo will do a better job of. If we're out in the field in bright sun, we'll take the Canon, but more times than not, our flash work is done in dimly lit reception halls. Pros - AF assist beam - Cost.. which can be huge Cons - Cheaper build quality - Scroll wheel - Reduced range - After market firmware isn't guaranteed to work with newer devices - Foot mount doesn't seem level or perfect fit While the cons list is larger than the pros, this receiver is simply a better buy than the Canon one. The price of the AF assist beam is worth a lot.. and considering its cheaper than the Canon... its almost a no brainier. I would start out with this receiver, and add the Canon to your kit if you're finding that range is an issue.
December 14, 2017
I'd give it 4 and a half if I could - it's a great device and a really good value. Because there are reviews floating on the net that say it's hard to upgrade the firmware on these if you have a 32 bit OS (which you want to do because that enables it to work with the new 430ex iii rt), let me set your minds at ease: I am running 64bit win8.1 and the utility and firmware available on yongnuo's site as of Dec 2015 worked flawlessly and couldn't be simpler. I now have the latest firmware on my device. Like other reviewers, I have found this works seamlessly with my canon flash - every function I've experimented with. I gave it 4 stars because the shoe is looser than it should be, but the device stays put and because the contact points are spring loaded anyway, that does not cause any problems with data transmission. The other issue is that the focus lamp fires its beam to the upper right, not in the center. but the camera still focuses ok. (I tried it in the pitch black). In short, this is an excellent companion to the rt flashes. Canon's version only makes sense at their price if weight is a critical issue AND you absolutely must have the canon brand. (the 430ex iii rt, while heavier, is a far better value for nearly the same price)
By Gerald Fagan
December 5, 2017
Ive had this for about a month now and I love it compared to what I use to use, which was just some cheap wireless triggers off of ebay. I have been using this to control my Canon 600ex rt off camera outside on location in 32F give or take weather. The range is great, I have not exceeded the range of this. Power consumption, I got about 400 shots before the two rechargeable AA's died, so not bad but not great. The display has gone bezerk a few times, but keeping in mind I am using this in freezing conditions, hopefully that wont happen during the summer. And when it gets really cold the screen is slow to update as you change the power settings. This seems to be worse in manual mode than auto. My only problem is that the power adjustor is hidden in the manual mode, you have to press a few buttons before you can change the power, it should be on the home display. ETTL is a bit easier to adjust the power, you only have to press one button instead of a few. Other than that, this is a great device, well worth the $100.
By Jack D
October 31, 2017
Although I did not purchase this particular product from , I do own it and use it regularly. The YN-E3-RT is compatible with Canon Speedlites that have built-in wireless remote capabilities. This list includes the 600EX and 600EXII series, the 580EXII and the 480EXIII series. It also works with the YongNuo YNE3-RX wireless flash receiver. For all other Canon compatible speedlight units without wireless remote, the RNE3-RT receiver will allow these speedlites to be used wirelessly. The ETTL features will also be available if the speedlite has this capability through the hot shoe. The only reason for the 4-star rating is that this trigger has a wonderful feature not found on the Canon or other flash triggers compatible with Canon. that feature is that the YNE3-RT has an Auto Focus Assist Beam. When it works, that is. I have contacted YongNuo and their reply is that this is a known issue and they are working on a firmware fix. If they fix this, I will change to a 5-start rating. I must comment on the AF Assist on this unit, it is not just a blob of light transmitted , but a pattern of crosses that the auto focus in the camera locks onto quickly. Canon, take note, this is a much needed feature!
September 20, 2017
If you're looking for an alternative to OEM Canon RT transmitter, this is it. Looks, feels and works just like the Canon OEM at a fraction of the price. I've field tested this transmitter under various situations and venues and it passed with flying colors. I recently used this at a venue with over 40 photographers at an outdoor shoot and did not experience any transmission problems as long as everyone is on the right channel. I highly recommend this Speedlite Wireless Transmitter if you don't want to spend the extra cash on the Canon unit.
By Gadget Guy
August 25, 2017
I picked up this unit after looking into reviews of this vs, Canon's entry (ST-E3-RT Speedlite Transmitter); the Yongnuo price is 40% of Canon's price. I've used it for several dozen test shots and have been very happy with the results. You lose some of the cool 600EX-RT features when it is off-camera (e.g. adjusting for focal length), but there are so many things you can do (uplight, downlight, sidelight, hold it in your hands and point light, umbrellas...). I have not compared this side-by-side with the ST-E3-RT, but so far I have not found anything on my Speedlight that this unit doesn't support. Well done, Yongnuo!!
By David W West
August 24, 2017
I was a bit skeptical that it would work as well as the Canon product for my Canon 600ex-rt's, but it does. I haven't tested for extreme distances yet, but flawless at normal ranges so far. Focus assist is a nice feature that Canon does not have and works fine on my 5dm3. The buttons, screen menu, switch layout are same as Canon. Build quality is not as robust as Canon, meaning the on/off switch and rotary dial don't have that solid feel - time will tell if that impacts longevity over years of use but this is not worrisome quality. The hot shoe lock is not rock solid (a slight wiggle), but it is adequate and I have no fear of it coming off the camera accidentally. This is one of the best off brand purchases I've made.
By David Park
August 22, 2017
I needed a cheap but working solution to wirelessly fire off 3 flashes. I looked at canon ST E3 RT and while its nice I found it to be expensive. I then did some research and found the YN E3 RT. At first I was hesitant to make the purchase because I read reviews how it would work for a couple of days then stop. Well I just got down taking 435 photos and the flash popped off every time. So maybe the other people got a bad copy? Only downside about this is that you need to perform a firmware update for it to work with the new Canon 430ex RT III. Also, you cannot do the update from the Mac.....It's PC only. Other than that I am happy with the transmitter,
By Anthony Montgomery
August 19, 2017
This is awesome. I have a Canon version and the Yongnuo version. I keep the Canon on my 7D Mark II and the Yongnuo on my Nikon DF and guess what - I can control my Canon 600EX-RTs (manually) with the Yongnuo on my Nikon. The display was a little sluggish when I first got it and I thought I should send it back but I upgraded the firmware and it works great. You have to press the test button if you turn the camera or trigger off in order to re-sync it with the flash but other than that its nice to not have to take my Nikon flash (woefully underpowered compared to the 600).
By D. Johnson
August 15, 2017
Instead of investing in a third Canon 600EX-RT flash to control the two I've already got, I decided to go with the Yongnuo YN-E3-RT transmitter to save a little cash. This product works really well. Aside from actually having a flash tube, it seems to do everything that the 600EX-RT can do, and it does it using the exact same menus and controls. I didn't have to learn a new menu system to be able to use its advanced features because I was already familiar with the menus on the 600EX-RT. The only reason I didn't give it 5 stars was because its build quality isn't quite up to Canon's standards. It's built well enough, and it should hold up just fine, but its easy to tell that the plastic used isn't quite as nice as what Canon uses. Not that it's bad... just not up to the standards of Canon. Unless you're really hard on your gear it is built well enough. Aside from that, if you were to remove the manufacturer's name from the casing you'd have a really hard time knowing that it wasn't actually built by Canon.
July 17, 2017
Besides superficial differences in button/switch feel, and a different LCD screen, this thing is almost a menu for menu copy of the original. After reading previous reviews, I updated the firmware before even attaching it to my camera, which was an extremely easy process. The USB connection is where the control cable plug is on the OEM, and doubles as the same thing and includes both necessary adapter cables--USB to PC (the camera connection kind of PC) and USB to 2.5mm, so it can still perform linked shooting. It has all the same options as the original, but adds in the AF beam grid. The grid works well with some of my lenses and not as well with others in single AF point, which is how I do most shooting with flashes--it works great when I use an AF area, however. I have 3 600EX-RTs I've used it with. All the modes and custom functions operate correctly and the flashes fire as consistently as with the Canon original. My only complaint is that the trigger is such a faithful copy of the original that it also won't work with my Fuji X100s. Apparently they both require the camera send out more information through the hotshoe before it will fire. It would be great if YongNuo would fix this issue with a firmware update so that I can fire my 600EX-RT flashes in manual modes with non-Canon cameras off the dang hotshoe!
By A. King
July 15, 2017
Looks just like the Canon version (except the Yongnou branding) even the box is similar in style to Canon's, came with a pouch just like the real deal (less Canon branding), functioned with my Canon 600RT, worked on Canon cameras. If I didn't know any better I would think this thing is made on the same line as the "real" one, and just diverted for a different badge at the end. Glad I saved over $200 getting this version over the Canon branded model, can't speak for durability yet because it hasn't broken, but I could replace it two more times and still come out spending less than name brand.
February 8, 2017
Received mine last week and immediately paired it with three Yongnou YN600EX-RT II Speedlites. I had to make sure the channel settings for the flashes matched the remote but once that was done they paired effortlessly. I'm impressed with the immediacy with which the flashes pair to the remote and how quickly the connection reestablishes after the remote or flashes have been in sleep mode. I haven't tested at any significant distance yet but love the creative versatility and speed this unit has afforded me. The control layout matches the Youngnuo/Canon 600EX-RT Speedlites making adjustments for remote flashes fast and intuitive. The value for the price is incredible. I can't recommend it enough.
Agenda Evénements Plus
Meilleures ventes Plus
Votre question a été soumise avec succès
Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous