Prix uniquement sur l'application:
Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Notez que TOMTOP Forum est une communauté pour l'échange d'idées et la recherche d'aide, au cours de laquelle les enthousiastes technologiques participeront à la discussion. Pendant ce temps, le service à la clientèle TOMTOP (avec l'icône Tomtop Customer Service) répondra en temps opportun, avec la même fonction que le contact sur http : //www.tomtop.com/contactsouvrez ce forum en pleine page
basé sur 518 Avis des clients
Partagez votre opinion avec les autres clients et obtenir des points Tomtop, les 5 premiers examens obtiennent le double de points Tomtop!Écrire un avis de client
By E. Milkunic
December 30, 2017
I've owned this product for about 3 months now and I just fallen in love with it. I own 3 Pocketwizards II which I use with my studio lights but I've been looking for a trigger cable which would trigger the camera and flash simultaneously. That set up for Pocketwizard would have cost me about 60 to over 100 bucks alone so I took a chance with the Yongnuo's. I got the 2 Trigger package which came with a shutter release cable for about 30 bucks. I love it so much that I ordered another set for a 2 light set up and wireless trigger system. I've read many negative reviews on where people are having trouble putting the flash on it and securing it on the light stand! Not to be rude or anything but those people should probably stick to natural lighting or educate themselves more on how to properly set up a lighting system. The only negative thing about the trigger would be that you have to turn it on before you mount the flash but beside that love those little buggers!
October 30, 2017
These flash triggers do exactly what they are supposed to do and more. Since they work also as a shutter release you can fire the flash with the transceiver that it is attached to while also activating the shutter with out ever touching the camera. This means I can hold a speedlite in my hand with a RF-603 attached to it and fire the speedlite with the test button on the transceiver and it will fire the flash and activate the shutter on the camera. this make doing composites a lot easier. this little bit of information wasn't in the description but i did find it buried in the manual.
October 16, 2017
My RF-602 triggers are aging and that CR2 battery is a real PITA, so I thought I'd try picking up a set of the RF-603II triggers not only for the numerous improvements (locking ring, on/mode switch on the SIDE of the unit, the test button working in hand, etc.) but because these would be compatible without modification with my micro four-thirds camera (Panasonic G3). Worked great out of the box on both my Canon and Panasonic cameras. But. Whether I got a bad unit or a bad cable, I don't know, but the set could not be used as a shutter release with my 50D and 5DMkII, so I am returning them. In addition, I could not get another feature that was mentioned in the specs to work at all, which was the use of the PC port as a triggering input (from, say, a camera's PC port or a light meter) in Tx mode. I like to use a small optical slave in conjunction with the pop-up flash of my Powershot S90 to do radio off-camera flash triggering sometimes (I'm just weird that way), and it works fine with my RF-602s (which are old enough to still have the PC input port on the Tx unit). Couldn't get it to work. And the manual that came with the triggers describe the PC port as an output only (just like on the Mk I 603s). So if this was the feature you wanted the triggers for, you may want to wait and see if anybody reports success on this. Other than that, the triggers were great are popping off remote flashes in my testing, and I'm sorry the other features didn't work as I expected them to.
September 15, 2017
I'm using these to trigger multiple Yongnuo YN560 IV speedlight strobes with built-in receivers and they work flawlessly. Since the speedlights have the receivers built in, you only need one of these mounted in the camera hot shoe. If using a speedlight without a compatible receiver built in, you can use the second RF-603 II to fire it. I just keep the second one as a spare trigger. I also have the Yongnuo YN560-TX flash commander which triggers the same strobes, but also allows you to adjust the flash output and other flash settings. The YN560-TX also sits in the camera hot shoe but is considerably larger. However, it will still make all the flash adjustments even if it's not mounted on your camera. So I find it useful to make the adjustments using the YN560-TX commander which I can keep in my pocket and put the RF-603 II on the camera and stay streamlined.
By Charlie Bass
August 23, 2017
They arrived packed very securely in 2 per box in 1 package. I was immediately impressed with the packing and thickness of the boxes. I opened them, installed the 2 AAA batteries in each (they do not come with any so have some ready) got my Canon 580EX II out and started taking pictures right away. There is a small instruction manual with each kit, but unless you just want to know the names of the parts, setting the RF-603 up is a breeze. After shooting several pictures around the house, I attached the cable to make it work as a wireless trigger for my camera--worked like a charm. Several have commented that there is no locking mechanism for attaching it to the hot shoe on the camera--while that it true, I found that all 4 of the RF-603 transceivers I received fit snugly on the camera. I intentionally shook the camera to try to get it to slide back and it stayed firmly in place. I have absolutely no complaints about the transceivers. They work as described and saved me a whole lot of cash.
By J Ike
August 14, 2017
I use the RF-603 with my YN565ex and my Canon T3i. Initially I was a little frustrated getting these set up but once done I must say they work very well. The frustration had s much to do with my big fingers as it did with the actual transmitters. I fired about 100 test shots and they didn't miss once. I didn't do a distance test yet but they did trigger the flash while the camera was in another room with a wall between them. Works well as a wireless remote to fire the camera (say for long exposure night shots) and considering the cost of a wired trigger this feature makes the unit worth buying unto itself. This is an excellent value whether you are on a budget or not. They get the job done for a low cost which allows you to put that money into things where money should be spent...like lenses.
By Tim L.
July 14, 2017
If you are looking for a budget flash trigger, look no further. For the price, these just can't be beat. Some of the things I really like about these: Small, takes AAA batteries Work at great distances, a 100m actually seems accurate Triggers each time (tested for two days, about 1000 shots and fired every time) Each trigger can be used as a transmitter or transceiver (transmit and receive), great for when you want to use a light meter On and Off switch on the side (actually switch between OFF, TX, TRX) 1/320 sync speed, I could only test with my Canon 7D at 1/250th Comes with cable for triggering camera remotely, make sure to get correct model for you camera (C1, C3, N1, etc...) Has a Nut so it can be tightened to camera and/or flash Works with Yongnuo 560III So far I have not found anything I don't like about these. Make sure to get Yongnuo RF603 II, the originals RF603 do not have the same options. Ok, so I've had these for several months now, they are still working great, I've even ordered a few more, have about 8 now. The distance that these triggers work is amazing, inside and outdoors.
July 12, 2017
I have 6 of these. 4 of the old style and now two of the new. They are reliable and compact and work with any camera when paired with the right cable. I mostly use them to trigger my camera but they can also be used to trigger strobes. I am glad to see the power switch has been moved to the side so you can reach it when something is mounted above the trigger. Now if they can make the battery doors not fall apart when dropped that would make this review 5 stars. I dropped one and broke the clip on the battery door the first day I got these new ones. Out of the 6 triggers I have, 4 of the battery doors are broken and I have to tape them on. Hey Yongnuo, fix that and these would be nearly perfect.
June 23, 2017
The 603s do not work with the sony without a mod. open up the unit and solder a 120K ohm or 130K ohm 1/4 watt resistor between the VIN (+ terminal) and the J6 terminal (yellow wire). It works, at first you might think that it doesn't, if the screen on your flash has this -- instead of a flash power, just hit the buttons to cycle through the powers and then your flash will work great. That was my dumb mistake that took a moment to realize. There is some questions about it matching up with higher speeds. I didn't get a chance to test that yet. I did take a few test shots after the mod, with the 603 on my sony a58 and it worked well. The resistor I bought was from eBay and came in a pack of five. Received them in an envelope in two days.
June 17, 2017
I am very happy with these flash triggers. I have had no problem with the trigger setting off the flash when I am not taking a picture, a problem I had with a different brand. Occasionally the flash will not trigger but I think that is to be expected. They have a solid build and are low profile. My only complaint and why I did not give 5 stars is that I can not trigger the flash for meter readings unless the unit is connected to the camera and I have half pressed the shutter button and then push the test fire button. Its a pain to do all that with one hand while I hold the meter in front of someones face with the other. I would buy these again.
June 15, 2017
They work now... At first I could not install onto the camera, or into the flash stand nor into each other, I checked all part numbers and do have all correct items for canon units, I had to file both units lock pins with a small file until they would slide into each other then into the camera. After installing batteries and set up the units per instructions I was always getting shots that were way over exposed no matter what I did with the camera settings. Once setting the flash (speedlite 430EX) into manual and turning down the flash output to 1/64 which is my min. I was able to get good shots.
June 14, 2017
I was excited to see Yongnuo introduce a new model - I love their flashes, the CTR-301P transmitters and the RF-602 transmitters. The RF-603 is their newest generation of wireless flash transmitters -- they look similar to the RF-602 receivers, but go for a new route. Rather than a Transmitter and Receiver, these are "Transceivers" - meaning they do BOTH. If you buy 4 of them, you can put 3 on different cameras (as transmitters) and 1 on a flash (as a receiver), or put 1 on a camera (transmitter) and 3 on flashes (receivers), or any combination. With the RF-602's I bought 3 receivers and 3 transmitters (for the times I use multiple cameras), this would have allowed me to purchase fewer. Similar idea to the PocketWizards. The RF-603's (like the 602's) can also act as a wireless camera shutter release -- plug the release cable (one is included -- make sure you get the right one for your camera) into a receiver and connect it to a camera, and use the other transceiver to trigger it (by pressing the button on it --
By Hollie Swanson
June 1, 2017
these guys (i have 4) have allowed me to really change the way i light and take pictures. i use external lights manually (the YN560 strobes are my tool of choice) so i really don't care about ETTL or IR focus of the fancier models. at this price these guys are virtually disposable, though i haven't broken one yet. i use rechargeable batteries, and these units inevitably outlast the speedlights on battery power. they would get 5 stars if the on/off switch wasn't so easy to bump on in the bag, and especially if i could get TO it with the strobe mounted. but at this price, i am delighted with their performance. GET THAT FLASH OFF YOUR CAMERA WHERE IT CAN REALLY WORK FOR YOU! just do it. and forget the cheap duo-fold westcott umbrellas. talk about design obsolescence. get the single-fold photoflex with they nylon ribs. da bomB!
By Moises F.
April 16, 2017
I was a little skeptic in buying this product but once I did I was really surprised with how easy it is to use and how well it work. The first time using this product I was shooting an engagement shoot and the only issue I found was that there was another photographer at the venue. it seemed that he had either the same transmitter or was transmitting on the same frequency as I because I was noticing that my 430X II was being triggered when I was not taking pictures. I was able to work around it. This may be a problem depending the situation but it was something I saw this may be an issue for some people. My photo session was outdoors and the flash was being used as a fill light.
March 20, 2017
Excellent wireless flash trigger for the price. Since my interest was in learning/using off-camera flash, whether hand-held for more interesting light effects or remote placement to under-light or back-light a shot, I just needed a simple trigger. Any flash power adjustments I make manually before the shot. I'd have given five stars but the instructions were somewhat unclear and minimalistic. I spent quite awhile thinking the triggers didn't work and searching the web for solutions. The lights on them showed connection and the flash "should" have gone off...
By L. Turner
March 16, 2017
These are great. I was stuck with a flash and a camera that could not operate in "master" mode and considering buying an expensive master flash. I knew these type of things existed, but most are in the hundreds of dollar range. These are an amazing value, well made, and very reliable. HOWEVER, there is no hot shoe lock. No lever, no screw down, so they very easily wiggle out of the hot shoe and cause the flash not to function. I learned to push the trigger in to the hot shoe on my camera before each shot, but that is a bit tedious. I am not sure why it won't lock; it's fine with a flash on a flash stand, but one has to go on your camera hot shoe and should be able to be secured. Regardless, I would highly recommend these, I'd had many pros tell me they are just as good as the "big names!"
By T. J. Brown
March 7, 2017
After unwrapping them and installing two AAA batteries in each of them, was snapping pictures within minutes using my 7D and four flashes in manual mode: Two YN-560's One Canon 430EX One Canon 580EX II That left one RF-603 unit free to use as an off-camera shutter release. A much better solution (in my opinion) than the Canon RC1 infrared shutter release that I also own. There were no configuration issues, simply put batteries in them, plug them into the speedlights, and they work. I love it when stuff just works. The lack of a securing pin on the RF-603 to a hot-shoe is not an issue for me. The unit stays secure on my camera through spring-compression of the contacts. The 603's stay secured to my light stands through the stand's clamps, and each of my speedlights have a clamp that keep them secured to the top of the RF-603 units. I also do not have an issue with the dip-switches being in the battery compartment. With the dip-switches in the battery compartment, they won't get accidentally moved around. A great value!
February 14, 2017
After reading the positive reviews (on this site and others) I decided to make my purchase. I've used them on a couple of photo shoots (60D + triggering 2 YH560 and 1 430EX II) and I must say this product delivers! I'm an amateur budget minded photographer. These are budget priced, it doesn't mean low quality. Of course there are some flaws, for example: the channels are accessed though the battery casing and you'll need a small screwdriver to change the channels. In my opinion work around the flaws, its not about (with exception to glass and camera) what brand are in your arsenal, its about how you use your gear efficiently.
September 1, 2016
They work perfectly with my setup.Having taken around 100 shots, since receiving these, there were no misfires using the "TRX" setting on the side switch. I have enough confidence in these to have just placed an order for another set. The fact that these are multi-functional "transceivers" that can play either a receive or send function you get a lot of value for the dollar, especially when you consider that a pair of Pocket Wizard X units run $180. For me in buying two sets that's a $300 savings. Although I haven't had the opportunity to test the range, it is listed at 100m and I can't see my use ever getting to that range as I'm usually in a studio or at short range outdoors, using to either complement or overpower natural lighting. Again, for the enthusiast, or even the professional, you really won't believe the quality and performance of these thirty-dollar radio remotes.
August 18, 2016
Main reason I picked up the version 2 was because I started shooting with a Sony a7 and the versions 1 would not work on the camera, I read the 2 did work on the a7 so tried it out. They work like a charm! Best part is I can use the version 2 trigger on the camera and it will trigger any of the version 1's!! The on/off switch is now on the side of the trigger and easy to access. The lock wheel on the hotshoe is really nice addition. Not only is the lock wheel there, but it has nice grips on the wheel so you can actually turn it. Very pleased with this purchase.
Meilleures ventes Plus
Votre question a été soumise avec succès
Veuillez activer votre e-mail d'inscription. Si non reçu cliquez sur le bouton ci-dessous
NOTRE SITE RUNS OF COOKIES