MiNi 3DPRO 3-Axis Brushless Gimbal (For aircraft) suitable for GoPro4, GoPro3+, GoPro3, Gopro 4 or cameras
with similar size. Can be easily mounted in fixed wing, multirotor, helicopter for aerial photography, and can
work independently only need power supply.You can assemble the gimbal properly according to the drawing,
and then install the video camera on it.There is no need to set up and adjust the parameter. For the first use,
You should install the camera and ensure the gimbal is not touching anythng before power on the Gimbal,
and then keep it static for a while, after its reset,the gimbal will be in a level position automatically.
Features:
Built-in wiring, more simple and beautiful
Ready to use, do not need parameter calibration
Three converted installation: vertical, inverted and forward optional
Easy to install and easy to use
Specifications:
Working voltadge: 7~17V
(8.4V standard)
Static attitude tracking accuracy: 0.01~0.05
Motion attitude tracking accuracy: 0.1~0.5
Overload current protection: 800mA
Panning angle: 0°~360°
Roll angle:-45°~ +45°
Heading angle:-90°~+45° (up)
Pitch following rate: 2°/sec~25°/sec
Heading following rate: 3°/sec~75°/sec
Weight: 167g
(without camera)
Package Information:
Package size: 13 * 9.7 * 8.2cm / 5.2 * 3.9 * 3.3in
Package weight: 338g / 11.9oz
Brand gift box package
Package List:
1 * FY-Mini 3D Pro Brushless Gimbal
1 * Galss Fiber Anti Vibration Plate
1 * Camera Hook
1 * Pair Gimbal Suspender Mounting Hook
1 * USB
1 * Data Cable
8 * FPV Vibration Damping Balls
2 * Cables
1 * Screw Set
1 * English Instruction Manual
Mode Selection Instructions
When connect to RC receiver it can switch in 3 working modes, also can control the heading and pitch via the RC receiver.
Heading Follow Mode Camera Pitch and Roll angles remain constant, heading followsthe nose position, pitch can be control by RC .
Heading And Pitch Follow Mode Camera Roll angle remains constant. Heading follow the nose position and Pitch follow the elevation
of the aircreft.Heading Lock Mode Heading, Pitch and Roll are all locked to point at one position. Heading and pitch can be control by RC.