Mouse over to zoom in
5.46
Quick Release Plate 1/4" Screw Fit for Bogen 3157N Manfrotto 200PL-14 RC2 3030 3130
Price:
US$
5.46
Loading...
Ship to
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Questions & Answers
Yes, it comes with the pin.
By Pickelw on October 27, 2017
I don't have access to a 3001; I have a 3021 Tripod with a 3030 head. This item is the same size as the plate that came with the 3030. It is 2" long. The width is angled on both sides and the larger bottom is 1 5/8 inches wide. I see that in the product description the dimensions are 5.3 X 4.3 CM. But the one I re… see more I don't have access to a 3001; I have a 3021 Tripod with a 3030 head. This item is the same size as the plate that came with the 3030. It is 2" long. The width is angled on both sides and the larger bottom is 1 5/8 inches wide. I see that in the product description the dimensions are 5.3 X 4.3 CM. But the one I received is 5.1 X 4.1 CM (the size of my original Bogen plate) . I should point out that the Bogen 3030 head has a plate opening of about 5.4 X 4.4 CM so even if the 5.3 X 4.3 CM plate dimension is right, it would be ok. The plate does not need to be that precise in size. Anything close will work on the 3030. If I got one that was a little too big, I would just sand or file it down. I doubt that too small would ever happen. Good luck. see less
By DDC on September 2, 2017
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageAverage Rating:
4.7based on 38 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer ReviewBy 3***w
January 11, 2018
By Jake Kindred
December 6, 2017
By Barry A
November 27, 2017
By andyp
November 22, 2017
By Crawfie
November 11, 2017
By Stefano Solinas
November 10, 2017
By Matthew Heitman
November 8, 2017
By Mr. Brian R. Dougal
November 6, 2017
I own several "real" Manfrotto items (tripods and heads for video and SLR cameras) plus many compatible add-on's from others. Nearly all the add-ons represent good value for money, even if their actual quality is less than the big-name manufacturers. But this little item is the best of both worlds, indistinguishable quality for about 1/3 of Manfrotto's price . It even includes a 1/4" to 3/8" adaptor in the 3/8" base thread so it can be used either directly on a tripod or added to some other mount to add "quick-release" capability.
By Bill
November 3, 2017
By Frank Gibbs
November 3, 2017
By s***n
October 19, 2017
By Per Knudsen
October 7, 2017
By MC
August 14, 2017
Swiss compatible, pads grip well, nice light weight. Plate appears to be ally, and the screw is nicely machined from (presumably) steel. Can confirm that this unit does indeed have a flappy finger grip screw, instead of the coin/driver/hex key screws often found. Decent delivery and price from Andoer as usual.
By NTG
July 19, 2017
By Tin Tactoo
July 4, 2017
In use I have had to use a one inch 'riser' (hand made) as the catch to release the plate catches on my Manfrotto video tripod with fluid head (it's about twenty years old and I wouldn't change for anything as its such a good dependable 'workhorse' - I even made a small seat top so I can use it to sit on while waiting if I have to, so can't say fairer than that! ) but no big deal as it took an hour in the shed cutting some metal box section, tapping a quarter thread etc. then using a spare tripod screw to secure the base of this item to and away we went BUT I would point out this is in MY case and it probably won't affect yours but its all down to the tripod head area I think - on the other side of the coin, I have a 'cheapie' tripod brought as a sort of spare and have used it more as a cheap flash brolly stand for my still photography stuff as in portraits etc. and it fits that a treat. Overall, the product itself is a gem, despite my 'messing about in the shed' but as I have outlined, its because I chose to do it MY way as it suits my needs.. :)
By Tony
July 3, 2017
By GraGard
June 22, 2017
By HolyDiver
June 21, 2017
By Pimp Corn
June 11, 2017
By Andrew Johnson
May 16, 2017
I bought this to add a quick release to a Skywatcher Star Adventurer mount, unfortunately it is not flat enough so I have used for a different application in astrophography gear to mount a lens and camera. Overall it's a nice bit of kit, it easily converts a standard tripod head to one that is compatible with the Manfrotto QR plates that I use on my cameras / lenses. The plate is a little stiff going into place compared to the Manfrotto plate, but is interchangeable, I will certainly buy this again if I need to convert a tripod or monopod.
